Short on study time before your 3V0-41.22 exam? The 16 practice questions from Actual4Exams focus on the objectives that matter most in the VMware Advanced Deploy VMware NSX-T Data Center 3.X test, so every review session counts. Download the PDF and turn spare minutes into real progress.
VMware 3V0-41.22 Exam Overview:
| Certification Vendor: | VMware (Broadcom) |
|---|---|
| Exam Name: | VMware Advanced Deploy VMware NSX-T Data Center 3.X |
| Exam Number: | 3V0-41.22 |
| Related Certifications: | VMware Certified Professional - Network Virtualization (VCP-NV) |
| Exam Duration: | 135 minutes |
| Available Languages: | English |
| Exam Format: | Hands-on configuration and troubleshooting tasks, Performance-based lab exam |
| Recommended Training: | VMware NSX-T Data Center Training |
| Exam Registration: | VMware Certification Registration |
| Sample Questions: |  |
| Exam Way: | Online or authorized testing center (performance-based lab environment) |
| Pre Condition: | Recommended prerequisite: VMware Certified Professional - Network Virtualization (VCP-NV) or equivalent NSX-T experience |
| Official Syllabus URL: | https://www.vmware.com/education-services/certification.html |
VMware 3V0-41.22 Exam Syllabus Topics:
| Section | Objectives |
|---|---|
| Load Balancing | - Virtual service configuration - NSX Advanced Load Balancer concepts |
| NSX Edge Services | - North-South connectivity setup - Edge node deployment and configuration |
| NSX-T Logical Routing | - Routing protocols and route redistribution - Tier-0 and Tier-1 gateway configuration |
| Install, Configure, and Upgrade NSX-T Data Center | - Upgrade procedures and lifecycle management - NSX-T architecture and components deployment - Cluster preparation and transport node configuration |
| NSX-T Security | - Identity and security groups - Distributed firewall configuration - Micro-segmentation policies |
| NSX-T Logical Switching | - VLAN and overlay networking integration - Segments and logical switches configuration |
| Troubleshooting and Operations | - Monitoring NSX-T components - Common configuration issue resolution - Packet capture and diagnostics |
Common Questions About the VMware 3V0-41.22 Exam
The 3V0-41.22 exam, officially known as VMware Advanced Deploy VMware NSX-T Data Center 3.X, is the VMware test that leads to the VMware Certified Advanced Professional - Network Virtualization Deploy (VCAP-NV Deploy) certification at the Professional level. Passing it validates the skills employers expect from a certified professional. It is also associated with related credentials such as VMware Certified Professional - Network Virtualization (VCP-NV).
Recommended prerequisite: VMware Certified Professional - Network Virtualization (VCP-NV) or equivalent NSX-T experience
Entry requirements can change, so confirm the latest conditions on the official exam page: https://www.vmware.com/education-services/certification.html.
You can book the 3V0-41.22 exam through the official registration channels below:
Exam delivery: Online or authorized testing center (performance-based lab environment). Seats at popular test centers fill quickly, so schedule early once your preparation is on track.
VMware recommends the following training options for VMware Advanced Deploy VMware NSX-T Data Center 3.X candidates:
Pair any course with the 16 practice questions from Actual4Exams to measure how ready you really are before paying the exam fee.
Yes. A free PDF demo of the VMware Advanced Deploy VMware NSX-T Data Center 3.X questions is available, so you can check the question style and answer quality before you pay. Every purchase also includes 365 days of free updates, and if the product expires you can renew the update service at a 50% discount from your member zone.
If you take the corresponding 3V0-41.22 exam within 60 days of purchase and do not pass, you can apply for a full refund under the 100% Money Back Guarantee: submit a scan of your enrollment slip and your official Score Report (PDF) within 2 days of the exam date, and the claim is processed within 7 days. Attempts made within 3 days of purchase, downloads without an actual exam attempt, free materials, and expired orders are not eligible, and the candidate name must match the payer name. Prefer new material instead of a refund? You can exchange your purchase for two free products of equal value and keep the update service on your original product. As for delivery, the files are available for instant download and are also emailed to you within one minute of payment — if nothing arrives within 2 hours, contact customer service. There is no limit on how many computers you can install the product on.
The official VMware Advanced Deploy VMware NSX-T Data Center 3.X outline is organized into 7 domains. The first three are:
- NSX-T Logical Routing
- NSX-T Logical Switching
- Troubleshooting and Operations
See the complete exam topics section above for the full outline and the weighting of every domain.
VMware Advanced Deploy VMware NSX-T Data Center 3.X Sample Questions:
SIMULATION
Task 7
you are asked to create a custom QoS profile to prioritize the traffic on the phoenix-VLAN segment and limit the rate of ingress traffic.
You need to:
* Create a custom QoS profile for the phoenix-VLAN using the following configuration detail:
* Apply the profile on the 'phoenix-VLAN' segment
Complete the requested task.
Notes: Passwords are contained in the user_readme.txt.
take approximately 5 minutes to complete.
Subsequent tasks may require the completion of this task. This task should
Correct Answer:
See the Explanation part of the Complete Solution and step by step instructions Explanation:
To create a custom QoS profile to prioritize the traffic on the phoenix-VLAN segment and limit the rate of ingress traffic, you need to follow these steps:
Log in to the NSX Manager UI with admin credentials. The default URL is https://<nsx-manager-ip-address>.
Navigate to Networking > Segments > Switching Profiles and click Add Switching Profile. Select QoS as the profile type.
Enter a name and an optional description for the QoS profile, such as phoenix-QoS.
In the Mode section, select Untrusted as the mode from the drop-down menu. This will allow you to set a custom DSCP value for the outbound IP header of the traffic on the segment.
In the Priority section, enter 46 as the DSCP value. This will mark the traffic with Expedited Forwarding (EF) per-hop behavior, which is typically used for high-priority applications such as voice or video.
In the Class of Service section, enter 5 as the CoS value. This will map the DSCP value to a CoS value that can be used by VLAN-based logical ports or physical switches to prioritize the traffic.
In the Ingress section, enter 1000000 as the Average Bandwidth in Kbps. This will limit the rate of inbound traffic from the VMs to the logical network to 1 Mbps.
Optionally, you can also configure Peak Bandwidth and Burst Size settings for the ingress traffic, which will allow some burst traffic above the average bandwidth limit for a short duration.
Click Save to create the QoS profile.
Navigate to Networking > Segments and select the phoenix-VLAN segment that you want to apply the QoS profile to.
Click Actions > Apply Profile and select phoenix-QoS as the switching profile that you want to apply to the segment.
Click Apply to apply the profile to the segment.
You have successfully created a custom QoS profile and applied it to the phoenix-VLAN segment.
SIMULATION
Task 14
An administrator has seen an abundance of alarms regarding high CPU usage on the NSX Managers. The administrator has successfully cleared these alarms numerous times in the past and is aware of the issue. The administrator feels that the number of alarms being produced for these events is overwhelming the log files.
You need to:
* Review CPU Sensitivity and Threshold values.
Complete the requested task.
Notes: Passwords are contained in the user_readme.txt. This task is not dependent on other tasks. This task should take approximately 5 minutes to complete.
Correct Answer:
See the Explanation part of the Complete Solution and step by step instructions Explanation:
To review CPU sensitivity and threshold values, you need to follow these steps:
Log in to the NSX Manager UI with admin credentials. The default URL is https://<nsx-manager-ip-address>.
Navigate to System > Settings > System Settings > CPU and Memory Thresholds.
You will see the current values for CPU and memory thresholds for NSX Manager, NSX Controller, and NSX Edge. These values determine the percentage of CPU and memory usage that will trigger an alarm on the NSX Manager UI.
You can modify the default threshold values by clicking Edit and entering new values in the text boxes. For example, you can increase the CPU threshold for NSX Manager from 80% to 90% to reduce the number of alarms for high CPU usage. Click Save to apply the changes.
You can also view the historical data for CPU and memory usage for each component by clicking View Usage History. You can select a time range and a granularity level to see the usage trends and patterns over time
No help, Full refund!
Actual4Exams confidently stands behind all its offerings by giving Unconditional "No help, Full refund" Guarantee. Since the time our operations started we have never seen people report failure in the VMware 3V0-41.22 exam after using our products. With this feedback we can assure you of the benefits that you will get from our products and the high probability of clearing the 3V0-41.22 exam.
We still understand the effort, time, and money you will invest in preparing for your certification exam, which makes failure in the VMware 3V0-41.22 exam really painful and disappointing. Although we cannot reduce your pain and disappointment but we can certainly share with you the financial loss.
This means that if due to any reason you are not able to pass the 3V0-41.22 actual exam even after using our product, we will reimburse the full amount you spent on our products. you just need to mail us your score report along with your account information to address listed below within 7 days after your unqualified certificate came out.
