[2022] SPLK-1002 Exam Dumps, Test Engine Practice Test Questions
Pass SPLK-1002 exam [Nov 03, 2022] Updated 179 Questions
SPLK-1002 Exam Content
The domains to check out for SPLK-1002 test along with their details are outlined below. However, this guideline is not a rigid structure of what the test has. Candidates are required to study widely so they become fully prepared. The content of SPLK-1002 can be altered without notifying them.
- Creation of data models (10%)
- Correlating events (15%)
- Creation and use of workflow actions (10%)
- Use of the CIM (10%)
- Application of transformational commands in visualizations (5%)
- Creation of field aliases as well as calculated fields (10%)
- Creation of tags as well as event types (10%)
- Creation and use of macros (10%)
In the first section, the Splunk SPLK-1002 exam will test the candidates on how they can use the chart and timechart commands. Then in the questions related to the second domain, they will also be checked on their knowledge of eval command, how well they can apply the search as well as the where command to filter outcomes, and their understanding of the fillnull command. In the third domain, the candidates will have to showcase their skills in the identification of transactions, using fields for group events, making transactions with search, making reports on the transactions, and deciding between the use of transactions and statistics according to a given scenario.
The fourth, fifth, and sixth topics of SPLK-1002 will also go be appraising the candidate's knowledge of the fields and other features. They highlight areas such as the use of the Field Extractor (FX) for performing regex field extractions and using the FX to do delimiter field extractions. The candidate will also be gauged in their knowledge of describing, creating, and utilizing field aliases as well as calculated fields. Finally, one's understanding of the creation and use of tags will be assessed, along with the knowledge of event types, their different uses, and the skills in their creation.
The test will also measure the candidate's awareness of macros, the creation as well as the use of basic macros, defining variables and arguments for macros, and adding and using those arguments. Under the eighth domain, one has to show the knowledge of diverse functions such as GET, POST as well as Search workflow actions, and demonstrate skills in their creation.
In the last two modules, the exam-takers will also be required to prove their expertise in the creation of data models and utilizing CIM. These include an understanding of the connection between pivot and data models, the creation of data models, and the ability to define the attributes. Also, the candidates have to be competent in normalizing data with the help of CIM, be familiar with the CIM Add-On knowledge objects, and the basic features of this solution.
Conclusion
The Splunk SPLK-1002 exam is best for those candidates wishing to earn the Splunk Core Certified Power User certification, and it is ideal for professionals looking to build their portfolios. Exploring the specified domains thoroughly during the revision stage enables the fortification of one's awareness and skills concerning the field. Most of the career opportunities that are unlocked by the certificate are rewarding and satisfying.
NEW QUESTION 96
Which of the following statements describe the search string below?
| datamodel Application_State All_Application_State search
- A. Events will be returned from the data model named Application_State.
- B. No events will be returned because the pipe should occur after the datamodel command
- C. Events will be returned from dataset named Application_state.
- D. Events will be returned from the data model named All_Application_state.
Answer: C
NEW QUESTION 97
Reports _____ allowing drilldown by default.
- A. Are not
- B. Are
Answer: A
NEW QUESTION 98
which of the following commands are used when creating visualizations(select all that apply.)
- A. iplocation
- B. Choropleth
- C. Geostats
- D. Geom
Answer: A,C,D
NEW QUESTION 99
Which function should you use with the transaction command to set the maximum total time between the
earliest and latest events returned?
- A. endswith
- B. maxspan
- C. maxduration
- D. maxpause
Answer: B
NEW QUESTION 100
Which of the following can be used with the eval command tostring function (select all that apply)
- A. ''hex''
- B. ''commas''
- C. ''duration''
- D. ''Decimal''
Answer: A,B,C
Explanation:
https://docs.splunk.com/Documentation/Splunk/8.1.0/SearchReference/ConversionFunctions#tostring.28X.2CY.29
NEW QUESTION 101
In this search, __________ will appear on the y-axis. SEARCH: sourcetype=access_combined status!=200 | chart count over host
- A. status
- B. host
- C. count
Answer: C
NEW QUESTION 102
Which of the following statements describe the search below? (select all that apply) Index=main I transaction clientip host maxspan=30s maxpause=5s
- A. It groups events that share the same clientip and host.
- B. The first and last events are no more than 30 seconds apart.
- C. The first and last events are no more than 5 seconds apart.
- D. Events in the transaction occurred within 5 seconds.
Answer: A
NEW QUESTION 103
Which workflow action method can be used the action type is set to link?
- A. GET
- B. PUT
- C. Search
- D. UPDATE
Answer: A
Explanation:
Explanation
https://docs.splunk.com/Documentation/Splunk/8.0.2/Knowledge/SetupaGETworkflowaction Define a GET workflow action Steps
* Navigate to Settings > Fields
* Click New to open up a new workflow action form.
* Define a Label for the action.
The Label field enables you to define the text that is displayed in either the field or event workflow menu.
Labels can be static or include the value of relevant fields.
* Determine whether the workflow action applies to specific fields or event types in your data.
Use Apply only to the following fields to identify one or more fields. When you identify fields, the workflow action only appears for events that have those fields, either in their event menu or field menus. If you leave it blank or enter an asterisk the action appears in menus for all fields.
Use Apply only to the following event types to identify one or more event types. If you identify an event type, the workflow action only appears in the event menus for events that belong to the event type.
* For Show action in determine whether you want the action to appear in the Event menu, the Fields menus, or Both.
* Set Action type to link.
* In URI provide a URI for the location of the external resource that you want to send your field values to.
Similar to the Label setting, when you declare the value of a field, you use the name of the field enclosed by dollar signs.
Variables passed in GET actions via URIs are automatically URL encoded during transmission. This means you can include values that have spaces between words or punctuation characters.
* Under Open link in, determine whether the workflow action displays in the current window or if it opens the link in a new window.
* Set the Link method to get
* Click Save to save your workflow action definition.
NEW QUESTION 104
What does the following search do?
- A. Creates a table of the total count of mysterymeat corndogs split by user.
- B. Creates a table of the total count of users and split by corndogs.
- C. Creates a table with the count of all types of corndogs eaten split by user.
- D. Creates a table that groups the total number of users by vegetarian corndogs.
Answer: C
NEW QUESTION 105
Which of the following can be used with the eval command tostring function (select all that apply)
- A. ''hex''
- B. ''commas''
- C. ''duration''
- D. ''Decimal''
Answer: A,B,C
Explanation:
Explanation
https://docs.splunk.com/Documentation/Splunk/8.1.0/SearchReference/ConversionFunctions#tostring.28X.2CY.
NEW QUESTION 106
What information must be included when using the datamodelcommand?
- A. Data model dataset name.
- B. Multiple indexes
- C. statusfield
- D. Data model field name.
Answer: D
Explanation:
Explanation/Reference: https://docs.splunk.com/Documentation/Splunk/8.1.1/SearchReference/Datamodel
NEW QUESTION 107
Which of the following searches will return events containing a tag named Privileged?
- A. tag=priv*
- B. tag=Priv
- C. tag=Priv*
- D. tag=privileged
Answer: C
NEW QUESTION 108
When multiple event types with different color values are assigned to the same event, what determines the color displayed for the events?
- A. Rank
- B. Priority
- C. Precedence
- D. Weight
Answer: B
Explanation:
Reference:https://docs.splunk.com/Documentation/SplunkCloud/8.0.2003/Knowledge/Defineeventtypes
NEW QUESTION 109
Which of the following searches show a valid use of macro? (Select all that apply)
- A. index=main source=mySource oldField=* | eval newField='makeMyField(oldField)'| table _time newField
- B. index=main source=mySource oldField=* | "'newField('makeMyField(oldField)')'" | table _time newField
- C. index=main source=mySource oldField=* | stats if('makeMyField(oldField)') | table _time newField
- D. index=main source=mySource oldField=* |'makeMyField(oldField)'| table _time newField
Answer: A,D
Explanation:
Reference:
https://answers.splunk.com/answers/574643/field-showing-an-additional-and-not-visible-value-1.html
NEW QUESTION 110
This tab shows you the event patterns in the results of a specific search.
- A. statistics
- B. visualization
- C. patterns
Answer: C
NEW QUESTION 111
......
Splunk SPLK-1002 Real 2022 Braindumps Mock Exam Dumps: https://www.actual4exams.com/SPLK-1002-valid-dump.html
Splunk SPLK-1002 Actual Questions and 100% Cover Real Exam Questions: https://drive.google.com/open?id=1nLorCOjUg7BYKOGf3ONb-JlTe6WHFZN3