[Jan 04, 2022] Get New NSE6_FWF-6.4 Certification Practice Test Questions Exam Dumps
Real NSE6_FWF-6.4 Exam Dumps Questions Valid NSE6_FWF-6.4 Dumps PDF
NEW QUESTION 10
Which two statements about background rogue scanning are correct? (Choose two.)
- A. Background rogue scanning requires DARRP to be enabled on the AP instance
- B. A dedicated radio configured for background scanning can detect rogue devices on all other channels in its configured frequency band
- C. When detecting rogue APs, a dedicated radio configured for background scanning can suppress the rogue AP
- D. A dedicated radio configured for background scanning can support the connection of wireless clients
Answer: C,D
Explanation:
To enable rogue AP scanning
NEW QUESTION 11
When configuring a wireless network for dynamic VLAN allocation, which three IETF attributes must be supplied by the radius server? (Choose three.)
- A. 83 Tunnel-Preference
- B. 65 Tunnel-Medium-Type
- C. 81 Tunnel-Private-Group-ID
- D. 58 Egress-VLAN-Name
- E. 64 Tunnel-Type
Answer: B,C,E
Explanation:
The RADIUS user attributes used for the VLAN ID assignment are:
IETF 64 (Tunnel Type)-Set this to VLAN.
IETF 65 (Tunnel Medium Type)-Set this to 802
IETF 81 (Tunnel Private Group ID)-Set this to VLAN ID.
NEW QUESTION 12
When enabling security fabric on the FortiGate interface to manage FortiAPs, which two types of communication channels are established between FortiGate and FortiAPs? (Choose two.)
- A. FortLink channels
- B. Security channels
- C. Data channels
- D. Control channels
Answer: C,D
Explanation:
The control channel for managing traffic, which is always encrypted by DTLS. l The data channel for carrying client data packets.
NEW QUESTION 13
How are wireless clients assigned to a dynamic VLAN configured for hash mode?
- A. Using the current number of wireless clients connected to the SSID and the number of IPs available in the least busy VLAN
- B. Using the current number of wireless clients connected to the SSID and the number of VLANs available in the pool
- C. Using the current number of wireless clients connected to the SSID and the group the FortiAP is a member of
- D. Using the current number of wireless clients connected to the SSID and the number of clients allocated to each of the VLANs
Answer: B
Explanation:
VLAN from the VLAN pool based on a hash of the current number of SSID clients and the number of entries in the VLAN pool.
NEW QUESTION 14
When configuring Auto TX Power control on an AP radio, which two statements best describe how the radio responds? (Choose two.)
- A. When the AP detects PF Interference from an unknown source such as a cordless phone with a signal stronger that -70 dBm, it will increase its transmission power until it reaches the maximum configured TX power limit.
- B. When the AP detects any other wireless signal stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
- C. When the AP detects any interference from a trusted neighboring AP stronger that -70 dBm, it will reduce its transmission power until it reaches the minimum configured TX power limit.
- D. When the AP detects any wireless client signal weaker than -70 dBm, it will reduce its transmission power until it reaches the maximum configured TX power limit.
Answer: B,D
NEW QUESTION 15
Refer to the exhibits.
Exhibit A
Exhibit B
A wireless network has been created to support a group of users in a specific area of a building. The wireless network is configured but users are unable to connect to it. The exhibits show the relevant controller configuration for the APs and the wireless network.
Which two configuration changes will resolve the issue? (Choose two.)
- A. For both interfaces in the wtp-profile, configure set vaps to be "Authors"
- B. For both interfaces in the wtp-profile, configure vap-all to be manual
- C. Disable intra-vap-privacy for the Authors vap-wireless network
- D. Increase the transmission power of the AP radio interfaces
Answer: B,C
NEW QUESTION 16
You are investigating a wireless performance issue and you are trying to audit the neighboring APs in the PF environment. You review the Rogue APs widget on the GUI but it is empty, despite the known presence of other APs.
Which configuration change will allow neighboring APs to be successfully detected?
- A. Enable Monitor channel utilization on the relevant AP profiles.
- B. Enable Radio resource provisioning on the relevant AP profiles.
- C. Ensure that all allowed channels are enabled for the AP radios.
- D. Enable Locate WiFi clients when not connected in the relevant AP profiles.
Answer: B
Explanation:
The ARRP (Automatic Radio Resource Provisioning) profile improves upon DARRP (Distributed Automatic Radio Resource Provisioning) by allowing more factors to be considered to optimize channel selection among FortiAPs. DARRP uses the neighbor APs channels and signal strength collected from the background scan for channel selection.
NEW QUESTION 17
Where in the controller interface can you find a wireless client's upstream and downstream link rates?
- A. On the controller CLI, using the diag wireless-controller wlac -d sta command
- B. On the AP CLI, using the cw_diag -d sta command
- C. On the controller CLI, using the WiFi Client monitor
- D. On the AP CLI, using the cw_diag ksta command
Answer: A
NEW QUESTION 18
Which factor is the best indicator of wireless client connection quality?
- A. Upstream link rate, the connection rate for the client to the AP
- B. Downstream link rate, the connection rate for the AP to the client
- C. The channel utilization of the channel the client is using
- D. The receive signal strength (RSS) of the client at the AP
Answer: D
Explanation:
SSI, or "Received Signal Strength Indicator," is a measurement of how well your device can hear a signal from an access point or router. It's a value that is useful for determining if you have enough signal to get a good wireless connection.
NEW QUESTION 19
Which two phases are part of the process to plan a wireless design project? (Choose two.)
- A. Project information phase
- B. Site survey phase
- C. Hardware selection phase
- D. Installation phase
Answer: B,D
Explanation:
Reference:
https://www.automation.com/en-us/articles/2015-2/wireless-device-network-planning-and-design
NEW QUESTION 20
Which two configurations are compatible for Wireless Single Sign-On (WSSO)? (Choose two.)
- A. A VAP configured for WPA2 or 3 Enterprise
- B. A VAP configured for captive portal authentication
- C. A VAP configured to authenticate locally on FortiGate
- D. A VAP configured to authenticate using a radius server
Answer: A,D
Explanation:
In the SSID choose WPA2-Enterprise authentication.
WSSO is RADIUS-based authentication that passes the user's user group memberships to the FortiGate.
NEW QUESTION 21
As standard best practice, which configuration should be performed before configuring FortiAPs using a FortiGate wireless controller?
- A. Set the wireless controller country setting
- B. Create a custom AP profile
- C. Preauthorize APs
- D. Create wireless LAN specific policies
Answer: B
NEW QUESTION 22
......
NSE6_FWF-6.4 Exam Dumps - PDF Questions and Testing Engine: https://www.actual4exams.com/NSE6_FWF-6.4-valid-dump.html
Latest NSE6_FWF-6.4 Exam Dumps for Pass Guaranteed: https://drive.google.com/open?id=1mqvg1n0SYo0akNSaKxhdB2QMunL-0i9D