2022 Realistic Actual4Exams NS0-184 Dumps PDF - 100% Passing Guarantee
Free Network Appliance NS0-184 Exam Questions and Answer
Here are the benefits of taking the Network Appliance NS0-184 Certification Exam
There are numerous benefits of taking the Network Appliance NS0-184 Certification Exam. Some of the benefits of taking the Network Appliance NS0-184 Certification Exam are given below:
The Network Appliance NS0-184 Certification Exam is the most preferred way to gain in-depth knowledge and skills about NetApp products and solutions. Easily configures and provisions NetApp solutions.
It is a widely accepted certification in the market and is a good way to enhance your career prospects. Optional certification that is offered by the company.
As it is one of the most preferred certifications, you will have the opportunity to get the best jobs in the market. The host who tries to connect to the Network Appliance NS0-184 exam can also be the one who will make you successful in your career.
Getting NS0-184 Certification will help you to peak your salary.
Have a look at the info about the Passing Score, time duration, language, and passing score for the Network Appliance NS0-184 Certification Exam
Info about the exam format and structure is discussed in detail in the NS0-184 Dumps. Overview of that info is given as follows:
Number of Questions: 60 questions
Time Duration: 90 minutes. 30 minutes extra for those whose mother language is not English
Languages: English
The passing score: 70%
Exam type: Multiple Choice
NEW QUESTION 12
On which type of network interfaces are the cluster interconnect LIFs created?
- A. on a UTA port shared with other LIFs
- B. on an interface group
- C. on a physical port
- D. on an FC or FCoE port
Answer: B
NEW QUESTION 13
Click the Exhibit button.
You are preparing to replace a Cisco Nexus 92300YC switch. You have executed the cluster ping-cluster node1 command and received the output as shown in the exhibit.
Which two checks indicate that the cluster is ready for the replacement to be performed? (Choose two.)
- A. 2 paths up, 0 paths down (UDP check)
- B. 2 paths up, 0 paths down (TCP check)
- C. larger than PMTU communication succeeds on 4 path(s)
- D. basic connectivity succeeds on 4 path(s)
Answer: B,D
NEW QUESTION 14
You have just finished installing and configuring an ONTAP cluster for a customer.
In this scenario, which product collects information and produces site documentation?
- A. Inventory Collect Tool
- B. NetAppDocs
- C. Active IQ OneCollect
- D. SnapGathers
Answer: B
NEW QUESTION 15
You want to add an AFF A400 HA pair to an existing cluster.
In this scenario, which LIF type is required?
- A. node-mgmt
- B. cluster-mgmt
- C. intercluster
- D. data
Answer: C
NEW QUESTION 16
Your customer wants to know more about the network configuration within the cluster.
In this scenario, which statement is correct about a LIF?
- A. A LIF is created within a broadcast domain and contains a pool of IP address.
- B. A LIF is an IP address or a WWPN that is associated with a port.
- C. A LIF is a port that provides physical connections.
- D. A LIF separates network domains to access cluster data.
Answer: B
NEW QUESTION 17
You are a NetApp Professional Services engineer, employed by NetApp. You have just completed an ONTAP cluster installation. You need to collect the relevant configuration information to enable the Service Event Report (SER) to be created.
Which tool would you use to accomplish this task?
- A. ONTAP System Manager
- B. NetAppDocs output report
- C. Active IQ scheduled reports
- D. Active IQ Config Advisor worksheet
Answer: C
NEW QUESTION 18
Click the Exhibit button.
You are reviewing the setup of a recently installed FAS9000 switched cluster. As shown in the exhibit, the cluster interconnects are connected to a pair of Cisco Nexus 3132Q-V 40 Gb ports.
For a high availability, which ports should swap Ethernet cables?
- A. Swap node1:e4a and node2:e4b.
- B. Swap node1:e8a and node2:e4a.
- C. Swap node1:e4a and node1:e8a.
- D. Swap node2:e4a and node2:e8a.
Answer: D
NEW QUESTION 19
You are asked to add a new HA pair to an existing 2-node switchless AFF A220 cluster. You must first convert to a 2-node switched cluster using Broadcom BES-53248 cluster switches.
Which two conditions must be fulfilled before you start the migration? (Choose two.)
- A. The "Enabled Switchless Cluster" option must be manually set to "false".
- B. All cluster LIFs must be in the up state and on their home ports.
- C. All cluster LIFs must have an MTU size of 1500.
- D. The 2-node switchless configuration must be properly set up and functioning.
Answer: B,D
NEW QUESTION 20
A storage administrator is trying to upgrade a pair of FAS2520s with internal SATA storage to a new 2-node FAS8300 cluster. The storage administrator wants to preserve the existing data.
In this scenario, which two capabilities are available to the storage administrator? (Choose two.)
- A. the ability to convert the FAS2520s to disk shelves and attach them to the new nodes
- B. the ability to move the volumes from the old nodes to the new nodes
- C. the ability to create a 4-node MetroCluster across the four nodes
- D. the ability to pull out the tray of internal disks of the FAS2520s and reseat the tray in the internal storage of the FAS8300s
Answer: A,C
NEW QUESTION 21
Your customer wants a newly installed AFF C190 cluster to send SNMP notifications to a trap host called OVERWATCH01.
In this scenario, which two statements are correct? (Choose two.)
- A. Configure a trap host on the cluster.
- B. Configure a firewall policy and allow SNMP.
- C. Configure DNS on the cluster.
- D. Configure an SNMP community string on the cluster.
Answer: A,C
NEW QUESTION 22
You have a 2-node FAS8300 switchless ONTAP 9.8 cluster that serves NAS volumes. You have a data SVM that connects to the network using multimode LACP with VLAN tags.
In this scenario, which front-end FAS8300 network port would you create the data LIFs?
- A. e0e-100
- B. a0a-100
- C. e0e
- D. a0a
Answer: C
NEW QUESTION 23
A customer requires encryption at rest on every node root volume.
In this scenario, which two encryption solutions will fulfill this requirement? (Choose two.)
- A. NSE
- B. NAE
- C. IPsec
- D. NVE
Answer: B,D
NEW QUESTION 24
After the installation of a new ONTAP 9.8 cluster, you have to verify if AutoSupport works.
In this scenario, which two commands would you use to accomplish this task? (Choose two.)
- A. system node autosupport destination show
- B. system node autosupport history show
- C. system node autosupport check show
- D. system node autosupport invoke
Answer: B,C
NEW QUESTION 25
You are expanding an existing 4-node ONTAP 9.8 cluster with a FAS8300 HA pair by adding a new FAS500f HA pair. Before the expansion, you are asked to save the configuration of the cluster to a backup file.
In this scenario, which two ONTAP configuration backup methods are available? (Choose two.)
- A. cluster
- B. storage VM
- C. node
- D. switch
Answer: A,B
NEW QUESTION 26
You have completed a base installation and system registration of an AFF A250 system, but you notice that you have one failed drive. Neither "un-failing" nor reseating the drive helped to repair it. You must ensure proper replacement of the failed drive.
In this scenario, which two actions should you take? (Choose two.)
- A. Ask the customer to open a technical case with NetApp Support.
- B. Power off the system until the drive has been replaced.
- C. Ask the customer for a drive with the same capacity and replace it.
- D. Run Active IQ Config Advisor to collect all the logs on the system.
Answer: C,D
NEW QUESTION 27
Click the Exhibit button.
You are installing a 2-node AFF A400 switchless cluster. You have cabled the management network to the e0M port. NetApp also recommends cabling to a redundant management network switch.
Referring to the exhibit, to which port should the redundant management network be cabled?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 28
You want to use the NetAppDocs tool to collect information on a newly configured ONTAP 9.8 cluster and to generate a Word document with the details of the cluster configuration.
Which two data sources would you use to collect the necessary data? (Choose two.)
- A. ONTAP Cluster
- B. AutoSupport packages
- C. Active IQ Digital Advisor
- D. Active IQ Unified Manager
Answer: A,D
NEW QUESTION 29
Which three components are required when setting up a new ONTAP cluster? (Choose three.)
- A. password
- B. cluster management IP
- C. intercluster IP
- D. node management IP
- E. Advanced Drive Partitioning
Answer: B,C,D
NEW QUESTION 30
......
Here are the topics of the Network Appliance NS0-184 Certification Exam
NS0-184 Dumps cover the following topics of the Network Appliance NS0-184 Certification Exam
ONTAP Networking
Customer Handoff
ONTAP Switches
Verified NS0-184 dumps Q&As Latest NS0-184 Download: https://www.actual4exams.com/NS0-184-valid-dump.html
Updated 100% Cover Real NS0-184 Exam Questions - 100% Pass Guarantee: https://drive.google.com/open?id=15bDsVYbgh3iQlQoo6EpBKLQbIqYHX3iw