[2022] Use Valid Exam 350-601 by Actual4Exams Books For Free Website [Q38-Q59]

Share

[2022] Use Valid Exam 350-601 by Actual4Exams Books For Free Website

Free CCNP Data Center 350-601 Official Cert Guide PDF Download

NEW QUESTION 38
An engineer is configuring VNTag between a virtualized server and a Cisco Nexus 5500 Series switch. Drag and drop the configuration steps from the into the correct order on the right.

Answer:

Explanation:

Explanation
install the virtualization feature set
Enable the virtualization feature set
Configure the port profile
Configure support for VNTag mode on the interface that connects to the server.
Configure the server to support NIV mode
Configure the vNICs of the server

 

NEW QUESTION 39
An engineer changed a configuration and must perform a rollback. Which statement applies to a Cisco Nexus 5600 Series switch?

  • A. The configuration rollback functionality is disabled when FCoE is enabled.
  • B. A user who is assigned to the network-operator user role can perform a rollback.
  • C. A system checkpoint is generated automatically when the running configuration is saved to NVRAM.
  • D. Errors are skipped when an atomic rollback type is triggered.

Answer: A

 

NEW QUESTION 40
An engineer must start a software upgrade on a Cisco Nexus 5000 Series Switch during a zone merge. What is the result of this action?

  • A. The zone merge executes and then the upgrade completes.
  • B. The zone merge stops.
  • C. The zone merge pauses until the upgrade completes
  • D. The upgrade stops

Answer: D

Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5500/sw/upgrade/602_N2_2/n5500_upgrade_downgrade_602_n2_2.html

 

NEW QUESTION 41
Which command reduces the amount of time it takes to complete the ISSU on a Cisco Nexus 7000 series switch that has dual supervisor modules and two I/O modules?

  • A. install all kickstart<image>system<image>
  • B. install all epld bootflash:<image>
  • C. install all kickstart <image>system<image>parallel
  • D. install all epld bootflash:<image>

Answer: C

 

NEW QUESTION 42
Refer to the exhibit.

Why does the python code for Cisco NX-API print error message?

  • A. NX-API does not allow configuration for features via the requests module.
  • B. The JSON is not a supported format for the NX-API.
  • C. The "type" is wrong in the header of the request and should be "cli_ conf".
  • D. The "type" is wrong is the body of the request and should be "cli_ conf".

Answer: D

 

NEW QUESTION 43
Refer to the exhibit.

Which command is run from the Guest Shell to set the description on the first five interfaces of the Cisco Nexus switch?

  • A. Option B
  • B. Option C
  • C. Option A
  • D. Option D

Answer: D

 

NEW QUESTION 44
Refer to the exhibit.

What is the result of implementing this configuration?

  • A. The Fibre Channel interface is configured for synchronization distribution.
  • B. The Fibre Channel interface is configured for SPAN.
  • C. The Fibre Channel interface is configured for FSPF.
  • D. The Fibre Channel interface is configuration for source distribution.

Answer: B

 

NEW QUESTION 45
An engineer must configure a named VSAN when the fabric interconnect is in Fibre Channel switch mode The VSAN must meet these requirements:
* Named VSAN must be called "VSAN 10".
* VSAN ID must be 10.
* FCoE ID must be 20.
* VSAN 10 must be attached to port 2 in slot 1.

  • A. Option A
  • B. Option B
  • C. Option D
  • D. Option C

Answer: A

 

NEW QUESTION 46
Host 1 is in VLAN 100 located is DataCenter 1 and Host2 is in VLAN200 located in DataCenter2. Which OTV VLAN mapping configuration allows Layer 2 connectivity between these two hosts?

  • A. Option B
  • B. Option D
  • C. Option C
  • D. Option A

Answer: A

 

NEW QUESTION 47
Refer to the exhibit.

Which two Cisco UCS components are upgraded as a result of the configuration? (Choose two.)

  • A. BIOS
  • B. board controller
  • C. Cisco UCS Manager
  • D. IOMs
  • E. adapters

Answer: A,B

Explanation:
Explanation

 

NEW QUESTION 48
An engineer configures the netflow feature on a Cisco NX-OS device. The requirement is to reduce the amount of export data collected by using a sampler. Drag and drop the netflow configuration steps from the left onto implemented needed to meet these requirements on the right. Not all steps are used.

Answer:

Explanation:

 

NEW QUESTION 49
A UCS B- Series server located in B5108 chassis 1 slot 1 is currently unavailable. The server needs to be associated with a specific service profile when it becomes available. Which associate service profile option should be selected to accomplish this goal?

  • A. server
  • B. server pool
  • C. custom server
  • D. restrict migration

Answer: C

Explanation:
Explanation
https://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/141/UCSM_GUI_Configuration

 

NEW QUESTION 50
Refer to the exhibit.

In a bidirectional PIM network using Phantom RP as an RP redundancy mechanism, two Cisco NX-OS routers have these requirements:
* R1 must be the active RP.
* R2 must be the backup RP that is used only if R1 is not reachable
Drag and drop the configuration steps to complete the configuration for Router 2. Not all configuration steps are used.

Answer:

Explanation:
Explanation
Graphical user interface, text, application Description automatically generated

 

NEW QUESTION 51
What is an advantage of NFSv4 over Fibre Channel protocol?

  • A. Uses IP transport
  • B. Congestion management
  • C. Improved security
  • D. Lossless throughout

Answer: C

 

NEW QUESTION 52
What is a characteristic of the install all command on the cisco Nexus series switch?

  • A. Upgrades only certain modules
  • B. Impact data plan traffic
  • C. Continues the upgrade process if any step in the sequence fails
  • D. Automatically checks the image integrity

Answer: D

 

NEW QUESTION 53
Refer to the exhibit.

What is the outcome of this command when the EPLD is updated on a Cisco Nexus 9000 Series Switch?

  • A. upgrades the EPLD on the switch disruptively
  • B. displays the compatibility of the EPLD upgrade and the image in the bootflash
  • C. displays the impact of the upgrade on the operation of the switch
  • D. shows a simulated upgrade of the EPLD

Answer: B

 

NEW QUESTION 54
Refer to the exhibit.

Drag and drop each traffic flow type from the left onto the corresponding number on the right Not all traffic flow types are used

Answer:

Explanation:

 

NEW QUESTION 55
An engineer must configure a named VSAN when the fabric interconnect is in Fibre Channel switch mode The VSAN must meet these requirements:
* Named VSAN must be called "VSAN 10".
* VSAN ID must be 10.
* FCoE ID must be 20.
* VSAN 10 must be attached to port 2 in slot 1.
Which command set configures a VSAN when the fabric interconnect is in Fibre Channel switch mode?

  • A. Option A
  • B. Option B
  • C. Option D
  • D. Option C

Answer: A

 

NEW QUESTION 56
Drag and drop the storage technologies from the left onto the correct descriptions on the right.

Answer:

Explanation:

Explanation

Application Description automatically generated

 

NEW QUESTION 57
Refer to the exhibit.

Which action must be taken before the maintenance policy can be committed?

  • A. Specify a maintenance time by selecting a schedule.
  • B. Set the soft shutdown timer to a specific time.
  • C. Associate a service profile to the maintenance policy.
  • D. Set the policy to apply the change on the next reboot.

Answer: A

 

NEW QUESTION 58
Which statement about the MAC address that the FCoE Initialization Protocol chooses for use by an E-Node in an FCoE implementation is true?

  • A. The FCoE Initialization Protocol uses the burned-in MAC address of the converged network adapter for all FCoE operations.
  • B. The FCoE Initialization protocol uses a 24-bit FC-MAP and concatenates a 24-bit Fibre Channel ID to create a fibric-provided MAC address.
  • C. The FCoE Initialization Protocol uses 01.00.0C as the first 24 bits of the MAC address and appends a 24-bit Fibre Channel ID to derive a full 48-bit FCoE MAC address.
  • D. FCoE does not use a MAC address. The FCoE Initialization Protocol is used to acquire a Fibre Channel ID, and the address is used for all FCoE communications in the same way as Fibre Channel Protocol.

Answer: D

 

NEW QUESTION 59
......

Cisco 350-601 Official Cert Guide PDF: https://www.actual4exams.com/350-601-valid-dump.html

Exam 350-601: Implementing and Operating Cisco Data Center Core Technologies - Actual4Exams: https://drive.google.com/open?id=1GQcgvdi0nfeauRHMxNwJzuRyGlMEBeek