[2023] New C_HANATEC_17 exam dumps Use Updated SAP Exam
Verified C_HANATEC_17 Dumps Q&As - C_HANATEC_17 Test Engine with Correct Answers
SAP HANATEC 17 Certification Exam Topics:
| Topic Areas | Topic Details, Courses, Books | Weighting |
|---|---|---|
| SAP HANA Architecture and Deployment Options | Describing the SAP HANA database system architecture and the different deployment options. HA100 (SAP HANA 2.0 SPS05) | 8% - 12% |
| SAP HANA Installation, Configuration and Upgrade | Performing installation, update and post-installation configuration tasks of the SAP HANA 2.0 database system. HA200 (SAP HANA 2.0 SPS05) | > 12% |
| SAP HANA Backup and Recovery | Configure and execute SAP HANA database system backups and restores in single host and system replication setups. HA200 (SAP HANA 2.0 SPS05) | 8% - 12% |
| SAP HANA Monitoring and Troubleshooting | Monitor and analyze the performance of SAP HANA systems, and be able to troubleshoot problems and perform Root Cause Analysis using the SAP HANA cockpit tools. HA200 (SAP HANA 2.0 SPS05) | 8% - 12% |
| SAP HANA Database Security | Understand the SAP HANA database system security concepts, create SAP HANA users and roles and setup audit policies. HA200 (SAP HANA 2.0 SPS05) | 8% - 12% |
| Database Migration Options for SAP HANA | Be able to perform database migrations from AnyDB to SAP HANA using the Database Migration Option (DMO) of SUM. HA100 (SAP HANA 2.0 SPS05) | 8% - 12% |
NEW QUESTION # 91
When can you load and unload individual tables and table columns manually in an SAP HANA tenant database? There are 2 correct answers to this question.
- A. When you need to optimize the standby node memory.
- B. When you need to extend the scale-out memory
- C. When you need to actively free up memory.
- D. When you need to measure total memory
Answer: C,D
NEW QUESTION # 92
Which connection types are allowed when you use system replication with the Active/Active option? There are 2 correct answers to this question.
- A. Implicit hint-based statement routing
- B. Explicit read only on the secondary system
- C. Automatic round-robin statement routing
- D. Explicit read and write on the secondary system
Answer: A,B
NEW QUESTION # 93
Which tool shows you information about the list of tables to be pre-loaded during an SAP HANA system start?
Please choose the correct answer.
- A. RecoverStateCheckerpy
- B. sap control
- C. hdbcons
- D. HDBAdmin
Answer: C
NEW QUESTION # 94
Which tool do you use to check that the actual size of the backup file is the same as the size recorded in the backup file header?
Please choose the correct answer.
- A. hdb backup check
- B. hdb recover check
- C. hdb back int
- D. hdb backup diag
Answer: D
NEW QUESTION # 95
Which activities do you have to carry out to configure your Multiple Database Container (MDC) System to a higher database isolation between tenant databases on the operating system (OS) level? There are 3 correct answers to this question.
- A. Lock the adm OS user \/ O Add dedicated tenant
- B. Create dedicated tenant OS users for each tenant.
- C. Add dedicated tenant OS users to the sapsys group.
- D. Remove the <sid> adm OS user from the sapsys group.
- E. users to the <sid> shm group.
Answer: B,C,E
NEW QUESTION # 96
You migrate an SAP HANA system using SUM database migration option. Which activities do you perform to activate the viewer mode for SAP support? Note: There are 2 correct answers.
- A. Create the OS user <sid>obs on the application server
- B. Create the database user <sid>obs on the application server
- C. Provide the sum observer URL to SAP support
- D. Provide the SUM URL to SAP support
Answer: A,C
NEW QUESTION # 97
Which activities do you have to carry out to configure your Multiple Database Container (MDC) System to a higher database isolation between tenant databases on the operating system (OS) level? There are 3 correct answers to this question.
- A. Create dedicated tenant OS users for each tenant.
- B. Add dedicated tenant OS users to the <sid> shm group.
- C. Lock the adm OS user.
- D. Add dedicated tenant OS users to the sapsys group.
- E. Remove the <sid> adm OS user from the sapsys group.
Answer: A,B,D
NEW QUESTION # 98
Which script can you trigger from SAP HANA cockpit to collect diagnosis information?
- A. hanadumpviewer.py
- B. fullSystemlnfoDump.py
- C. hanachecker.py
- D. HanaHwCheck.py
Answer: B
NEW QUESTION # 99
Your customer wants to know when the productive SAP HANA system was updated and to which version. Where do you find this information? There are 2 correct answers to this question
- A. In the administration editor of the SAP HANA studio
- B. In the catalog view of the SAP HANA Web-based Development Workbench
- C. In the SAP HANA database explorer for SAP HANA cockpit 2.0
- D. In the General Information app of SAP HANA cockpit 2.0
Answer: A,B
NEW QUESTION # 100
The SAP HANA memory pool CANNOT satisfy the memory requests for new queries. Where does the SAP HANA database request additional memory?
- A. Standby memory
- B. Virtual memory
- C. Resident memory
- D. Physical memory
Answer: B
NEW QUESTION # 101
You suspect an authorization issue while executing SAP HANA reports that contain calculation views. How do you configure the authorization trace? There are 2 correct answers to this question.
- A. Specify the name of the table/view.
- B. Specify the user as the database user.
- C. Select INFO from the System Trace Level for the Preprocessor component and then select AUTHORIZATION.
- D. Select INFO from the System Trace Level for the Indexserver component and then select AUTHORIZATION.
Answer: B,D
NEW QUESTION # 102
In single-host SAP HANA systems, you can use plain attached storage devices, such as Small Computers System Interface hard drives, solid-state drives (SSDs), or storage area networks (SANs).
However, to build a multi-host system with failover capabilities, the storage must ensure which of the following conditions?
There are 2 correct answers to this question.
- A. The standby host has file access
- B. The failed worker host no longer has access to write to files
- C. SYSTEM users replaced by standby host
- D. The standby host has access to write to files
Answer: A,B
NEW QUESTION # 103
Which tools can you use to monitor the response time of individual SQL queries? Note: There are 2 correct answers.
- A. Statement Monitor
- B. SQL Trace
- C. Thread Monitor
- D. SQL plan cache
Answer: B,D
NEW QUESTION # 104
logical error occurred in one tenant of your SAP HANA database. What action do you perform to make the tenant consistent again? Please choose the correct answer:
- A. Recover the system database. The affected tenant is recovered automatically.
- B. Recover the affected tenant. The system database is NOT recovered.
- C. Recover the affected tenant first and then recover the system database.
- D. Recover the system database first and then recover the affected tenant.
Answer: A
NEW QUESTION # 105
Which products do you use for SAP HANA administration? There are 2 correct answers to this question.
- A. SAP Web IDE for SAP HANA
- B. SAP HANA cockpit
- C. SAP Master Data Governance
- D. SAP Solution Manager
Answer: C,D
NEW QUESTION # 106
What is the correct sequence of the following four steps in the restart of the SAP HANA database system?
Please choose the correct answer.
- A. Row tables are loaded into memory. 2. Column tables are loaded. 3. Open transactions are recovered. 4.
Aborted transactions are rolled back. - B. Aborted transactions are rolled back.
- C. Row tables are loaded into memory. 3. Open transactions are recovered. 4. Column tables are loaded.
- D. Row tables are loaded into memory. 2. Open transactions are recovered. 3. Aborted transactions are rolled back. 4. Column tables are loaded.
- E. Aborted transactions are rolled back. 2. Open transactions are recovered. 3. Row tables are loaded into memory. 4. Column tables are loaded.
Answer: A
NEW QUESTION # 107
Your application runs with a technical user in a database of an SAP HANA multitenant database container.
You want to execute a query across tenant databases. Which of the following prerequisites are required? There are 2 correct answers to this question.
- A. Communication channel whitelist
- B. User sharing
- C. User mapping
- D. Bi-directional communication channels
Answer: A,C
NEW QUESTION # 108
Which kinds of patches are available in the SAP HANA2.0 revision strategy? Note: There are 2 correct answers.
- A. Datacenter Service Point
- B. Support Package Stack
- C. Support Package
- D. Feature Package Stack
Answer: B,C
NEW QUESTION # 109
Which system privilege must you have to restrict features for tennant databases in the SAP HANA cockpit?
Please choose the correct answer.
- A. WORKLOAD ADMIN
- B. RESOURCE ADMIN
- C. DATABASE ADMIN
- D. INFILE ADMIN
Answer: D
NEW QUESTION # 110
What can you assign to a user with the User Management app in SAP HANA cockpit?
There are 2 correct answers to this question.
- A. User group
- B. LDAP identity provider
- C. Scopes
- D. LDAP authorization mode
Answer: A,D
NEW QUESTION # 111
Which technology does the SAP DBA Cockpit use to store the performance indicators? Please choose the correct answer.
- A. SAP Adaptive Server Enterprise
- B. SAP Analytics Cloud
- C. SAP Business Intelligence
- D. SAP Intelligent Query
Answer: C
NEW QUESTION # 112
What are prerequisites for changing the SSFS Master Keys? There are 2 correct answers to this question.
- A. You have the credentials of the SYSTEM user
- B. You have the system privilege I IN I FILE ADMIN
- C. You have the credentials of the Operating system user <sid>adm that was created when the system was installed
- D. You have the server root privilege INIFILE ADMIN
Answer: B,C
NEW QUESTION # 113
......
SAP C-HANATEC-17 Exam is suitable for IT professionals who have experience working with SAP HANA technology and want to advance their career in this field. SAP HANA technology is widely used in various industries, including finance, healthcare, retail, and manufacturing, among others. Hence, obtaining this certification can open up new career opportunities for individuals and increase their earning potential. Overall, the SAP C-HANATEC-17 Exam is an excellent certification for IT professionals who want to demonstrate their proficiency in SAP HANA technology and its applications.
SAP C-HANATEC-17 certification exam is a challenging but rewarding test that can help professionals validate their expertise in SAP HANA technology. It is a valuable credential that can open up new career opportunities and lead to higher salaries and more challenging job roles.
Pass Your C_HANATEC_17 Dumps as PDF Updated on 2023 With 272 Questions: https://www.actual4exams.com/C_HANATEC_17-valid-dump.html
SAP C_HANATEC_17 Real Exam Questions and Answers FREE: https://drive.google.com/open?id=1JuQGFX--JMaPMH4qwSwpJkgOGMzmf49O