[2023] Pass EMC DES-4122 Exam Updated 62 Questions [Q13-Q34]

[2023] Pass EMC DES-4122 Exam Updated 62 Questions

Get 2023 Updated Free EMC DES-4122 Exam Questions and Answer

NEW QUESTION 13
What happened on April 30, 2019?

Note: It is necessary to dose (x) the simulator window before you can select a response to this question.

A. Option C
B. Option A
C. Option B
D. Option D

Answer: A

NEW QUESTION 14
What is a systems management console solution optimized for monitoring and managing Dell enterprise and remote office hardware?

A. iSM
B. iDRAC9
C. SupportAssist Enterprise
D. OpenManage Essentials

Answer: C

NEW QUESTION 15
What are key values related to systems management when deploying OpenManage Enterprise wit Dell EMC PowerEdge servers?

A. Simplify
Basic Hardware Element Management
Agent-free Management
Fee-based license
B. Simplify
Unify
Automate
Secure
C. Simplify
Fee-based license Agent-free Management Secure
D. Automate
Basic Hardware Element Management
Agent-free Management
Simple and effective

Answer: C

NEW QUESTION 16
What is required to use the iSM Automatic System Recovery feature?

A. Server Administrator installed
B. OS watchdog timer enabled
C. Server Administrator not installed
D. OS watchdog timer disabled

Answer: D

NEW QUESTION 17
A company that has very specific firmware requirements has acquired Dell EMC PowerEdge servers Any replaced parts of the type must match the original parts identically. The procedure must be as simple as possible with minimal risk.
What action should a technician take to help accomplish this goal?

A. Enable the Collect System Inventory On Restart (CSIOR) attribute
B. Configure servers to access the remote firmware repository
C. Enable the Match Firmware of Replaced Part setting in the system BIOS
D. Install and configure a repository manager

Answer: C

NEW QUESTION 18
What is a key feature introduced in OpenManage Mobile v2.0?

A. Access servers remotely through OME
B. Access a Virtual Console (VNC over SSH) securely
C. Access SupportAssist reports
D. Access iDRAC remotely

Answer: C

NEW QUESTION 19
A technician needs to repurpose a Dell EMC PowerEdge server. The server has dual processors with 18 cores each The OS only "sees" 24 threads in total.
Which setting should the technician change in Processor Settings in the System BIOS?

A. System Profile
B. HyperThreading
C. Number of Cores per Processor
D. Virtualization Technology

Answer: A

NEW QUESTION 20
You must configure a BOSS card with 2 x 120GB drives for a Dell EMC PowerEdge server. What is the only supported mode?

A. RAID 5
B. RAID 0
C. Non-RAID Mirroring
D. RAID 1

Answer: B

NEW QUESTION 21
What is a characteristic of SupportAssist Enterprise on Dell EMC PowerEdge 14G servers?

A. Proactive, predictive, and automated support technology to enable faster resolution and reporting
B. Includes onsite monitoring and automated collection of system state information
C. Used for customers that want monitoring of fewer than 1,000 server, storage, and networking devices
D. Dispatches technical support from Dell for all Dell servers, storage, and networking devices

Answer: B

NEW QUESTION 22
A Dell EMC PowerEdge server logs the following CPU Machine Check error CPU1 IERR What action might solve the problem?

A. Remove flea power
B. Update the Intel driver
C. Reseat the IDSDM
D. Swap the PERC controller

Answer: B

NEW QUESTION 23
An engineer needs to upgrade a Dell EMC PowerEdge R440 server from a single PSU to dual PSU configuration. There are unused PSU modules from PowerEdge R430 and R420 servers available, and they have the same wattage ratings.
What should the engineer do to complete the task?

A. Configure the PowerEdge R440 PSU with 1+1 configuration
B. Order a new PSU specific to the existing PowerEdge R440
C. Add the PowerEdge R430 PSU modules to the PowerEdge R440
D. Add the PowerEdge R420 PSU modules to the PowerEdge R440

Answer: B

NEW QUESTION 24
Match each RAID level to its characteristic.

Answer:

Explanation:

NEW QUESTION 25
What is a requirement to operate GPUs in a Dell EMC PowerEdge R740 server?

A. All GPU cards must be of the same type and model
B. All GPU cards must be of the same type but can be a different model
C. All GPU cards must be installed on the same riser card.
D. All GPU cards must be installed at the same time

Answer: A

NEW QUESTION 26
An engineer is checking a newly delivered Dell EMC PowerEdge R640 server that will be deployed for a new database environment The inventory consists of:

The server power configuration will be set for gnd redundancy The management switch is 1000 Base-T and the top of rack switches 10Gb What additional component(s) is needed for this configuration?

A. C20 to C21, PDU style, 250 V, 16 Amp, 3 5 meters power cord - qty 2
B. Hot-plug power supply, 1100W - qty 1
C. Dell Networking, cable, 40GbE (QSFP+) to 4 x 10GbE SFP+ passive copper breakout cable, 3 meters - qty 2
D. Hot-plug power supply, 750 W - qty 1

Answer: A

NEW QUESTION 27
A system engineer has a 14G Dell EMC Poweredge server with an amber light blinking. The engineer must pull a SupportAssist collection before calling Dell Support to evaluate what the potential problem. Use the simulator to collect and view the SupportAssist collection.

A. Send us your suggestion for this simulation task.
B. A technician wants to

Answer: A

NEW QUESTION 28
A company that has very specific firmware requirements has acquired Dell EMC PowerEdge servers Any replaced parts of the type must match the original parts identically. The procedure must be as simple as possible with minimal risk.
What action should a technician take to help accomplish this goal?

A. Enable the Match Firmware of Replaced Part setting in the system BIOS
B. Enable the Collect System Inventory On Restart (CSIOR) attribute
C. Configure servers to access the remote firmware repository
D. Install and configure a repository manager

Answer: C

NEW QUESTION 29
What must be done before upgrading OMSA from the 32-bit to the 64-bit version?

A. Save the license file
B. Back up the configuration
C. Uninstall the earlier version
D. Disable UAC

Answer: A

NEW QUESTION 30
You are creating a new RAID 5 storage pool on a Dell EMC PowerEdge server based on 30 x 1TB drives Which PERC model best supports this configuration?

A. H330
B. H740P
C. H740T
D. S140

Answer: D

NEW QUESTION 31
How can a technician know whether IDRAC9 System Lockdown mode is enabled?

A. Lockdown activation message in yellow box in the iDRAC web GUI Access to LCC is disabled when the server boots
B. Lockdown activation message in red box in the iDRAC web GUI Access to LCC requires a password when the server boots
C. Lockdown activation message in red box in the iDRAC web GUI Access to LCC is disabled when the server boots
D. Lockdown activation message in yellow box in the iDRAC web GUI Access to LCC requires a password when the server boots

Answer: A

NEW QUESTION 32
You are Investigating a disk error on a Dell EMC PowerEdge server and discover a Hot Spare has not been assigned to the Virtual Disk Group. Use the simulator to assign the Global Hot Spare. When you have finished using the simulator, dick Next.

Answer:

Explanation:
Send us your suggestion for this simulation task.

NEW QUESTION 33
An engineer wants to fully leverage Microsoft Windows Server 2016 for TPM-based guarded host deployment of a 14G server Which BIOS settings need to be used for installing the Windows server?
A)

B)

D)