[2023] Use Real SAP Dumps - 100% Free C-TS422-2021 Exam Dumps
Realistic C-TS422-2021 Dumps Latest SAP Practice Tests Dumps
NEW QUESTION 14
What type of time element can be reduced by strategy settings while dispatching?
- A. Transportation time
- B. Setup time
- C. Wait time
- D. Queue time
Answer: C,D
NEW QUESTION 15
You are working with planning strategy 40 (Planning-with-final assembly) When does consuption of planned independent requirements take places?
- A. When you deliver a sales order
- B. When the MRP result are saved
- C. When you create a planned order
- D. When you create a sales order
Answer: D
NEW QUESTION 16
In the Capacity Scheduling Table, which settings can you select for the planning strategy? Note: There are 3 correct answers to this question.
- A. Scheduling control
- B. Planning mode
- C. Finiteness level
- D. Fixed pegging
- E. Direction
Answer: A,B,E
NEW QUESTION 17
Which of the following is valid sequence of the main activities in production order processing?
- A. Creation, release, printing, goods issue, confirmation, goods receipt
- B. Creation, printing, release, goods issue, confirmation, goods receipt
- C. Creation, release, settlement, goods issue, confirmation, goods receipt
- D. Creation, availability check, release, material widrawal, confirmation
Answer: A,D
NEW QUESTION 18
Which of the following processes lead to an entry in the MRP planing file?
- A. Change of the material's procurement type
- B. Creation of sales order
- C. Creation of dependent requirements
- D. Change of the storage bin
- E. Creation of purchasing contract
Answer: A,B,C
NEW QUESTION 19
You want to create a production order from a planned order. What methods could you use?
- A. Order release
- B. Combined conversion
- C. Collective conversion
- D. Partial conversion
Answer: C,D
NEW QUESTION 20
Which actions does the system preform by default when you save a confirmation for a finished product in repetitive manufacturing?
- A. Archiving of documents for assembly scrap
- B. Posting of production costs to the production cost collector
- C. Posting of goods receipt for the product
- D. Material staging for nex order in sequence
- E. Reduction of associated capacity requirements
Answer: B,C,E
NEW QUESTION 21
What is the purpose of a reporting point confirmation in repetitive manufacturing?
- A. To provide timely updates of inventory management for the staged components
- B. To determine the work in progress along the production line
- C. To stage different components for a production line simultaneously
- D. To reduce the total production lead time for along production line
Answer: A,B
NEW QUESTION 22
Which time elements are relevant for lead time scheduling of a production order?
- A. Float after production
- B. Planned delivery time
- C. Setup time
- D. Total replenishment lead time
Answer: A,B
NEW QUESTION 23
Which SAP application can be used for forcasting in Supply Chain Planning?
- A. Material Requirements Planning (MRP)
- B. Supply Chain Management(SCM)
- C. Capacity Requirements Planning (CRP)
- D. Integrated Business Planning (IBP)
Answer: B,D
NEW QUESTION 24
An issue storage location was NOT found through the work center, bill of material(BOM) item, or material master. What determines whether the storage location can be derived from the production version?
- A. MRP group
- B. MRP profile
- C. MRP controller
- D. Plants parameters
Answer: A
NEW QUESTION 25
Which of the following elements does MRP take into account during net requirement calculation?
- A. Maximum stock level
- B. Safety stock
- C. Lot size
- D. Purchase orders
Answer: B,C
NEW QUESTION 26
What happens to this dependent requirement when you convert the planned order into a production order?
- A. They are converted into a reservation.
- B. They are converted into a production order.
- C. They are converted into a planned order.
- D. They are converted into a schedule line.
Answer: A
NEW QUESTION 27
When do you use variant bills of materials (BOMs)?
- A. When a material has multiple BOMs
- B. When multiple materials also have similar BOMs
- C. When a material has a configurable BOM
- D. When multiple materials have multiple BOMs
Answer: D
NEW QUESTION 28
How can you carry out cost object controlling for production orders?
- A. Order-related
- B. Product-related
- C. Milestone-related
- D. Cost-related
Answer: A,B
NEW QUESTION 29
What do you use to dispatch operations from planned orders so that the production plan can be fulfilled?
- A. Supply Network Planning (SNP)
- B. Demand Planning (DP)
- C. Material Requirements Planning (MRP)
- D. Capacity Requirements Planning (CRP)
Answer: C
NEW QUESTION 30
What could be the reason for multiple commitment of invidula capacities, where several operations have the same scheduled dates on a work center (or resource) after planing?
- A. Alternative work centers are fully occupied.
- B. The work center has several invidula capacities.
- C. The Change Planning Direction indicator is set in strategy profile.
- D. The finite Scheduling indicator is NOT set in the strategy profile.
Answer: B,D
NEW QUESTION 31
Which master data object governs the relationship between supply source and demand source in the Kanban process?
- A. Control cycle
- B. Production supply area
- C. Replenishment strategy
- D. Rate routing
Answer: A
NEW QUESTION 32
What are some uses for the low-level code assigned to each material?
- A. It is used by engineering to indentify subitems in an engineering bill of material (BOM).
- B. It is used by product costing to determine how coast are rolled up.
- C. It is used in MRP to determine the sequence in which materials are planned.
- D. it is used by ATP to determine the priority of alternative components.
Answer: B,C
NEW QUESTION 33
In your plant, MRP is activated.
Which option do you have to exclude a materila from the MRP run?
- A. Use specific MRP controller
- B. Use a specific MRP type
- C. Use a specific material status
- D. Use a specific material group
Answer: A,D
NEW QUESTION 34
Which options do you have to plan both quant ties and capacities during line loading in repetitive manufacturing?
- A. Run MRP with quota arrangement.
- B. Assign planned orders manual lying the planning table.
- C. Run MRP with automatic selection of production version.
- D. Run PP/DS heuristics for repetitive manufacturing.
Answer: A,D
NEW QUESTION 35
What are the possible results of a production planning run in Advanced Planning (PP/DS)?
- A. Scheduling agreement schedule line
- B. Planned order
- C. Purchase requistion
- D. Stock transport order
- E. Production order
Answer: A,B,C
NEW QUESTION 36
Which mhetods are available for goods issue posting of material components for process orders?
- A. Kanban
- B. Transfer order
- C. Blackflushing
- D. Picking list
Answer: C,D
NEW QUESTION 37
Which business processes are affected by setting in the order type-dependent parameters?
- A. Select master data.
- B. Intiate quality inspections.
- C. Define integration to cost accounting.
- D. Implement engineering changes.
Answer: A,C
NEW QUESTION 38
......
SAP C-TS422-2021 Certification Exam Topics:
| Topic Areas | Topic Details, Courses, Books |
|---|---|
| Capacity Planning in SAP S/4HANA 8% - 12% | Outline best practices for using SAP S/4HANA, describe the SAP HANA database concept and new user experience with SAP Fiori, outline the capabilities of embedded analytics. |
| Master Data in SAP S/4HANA > 12% | Identify and explain production relevant master data, including, but not limited to: bill of material, routing and production version. |
| Introduction to SAP S/4HANA Production Planning < 8% | Outline production planning components and functions, differentiate consumption-based planning vs. MRP, outline new trends in production planning. |
| Process Orders in SAP S/4HANA < 8% | Characterize process order elements and process order processing, determine master data objects for process orders, identify features for Good Manufacturing Practices (GMP). |
| Advanced Planning in SAP S/4HANA > 12% | Outline the basics and master data of advanced planning, explain tools (alert monitor, detailed scheduling planning board) and advanced planning and detailed scheduling processes, explain planning evaluation concepts |
| Lean Manufacturing in SAP S/4HANA 8% - 12% | Identify repetitive manufacturing specific master data, explain line load planning and confirmation, outline Kanban master data and Kanban processes. |
| Production Orders in SAP S/4HANA > 12% | Determine BOM item category, describe order status management and set user statuses, configure availability check for components, trigger routing selection, set up an order type, apply material staging and confirmation. |
C-TS422-2021 Dumps PDF - C-TS422-2021 Real Exam Questions Answers: https://www.actual4exams.com/C-TS422-2021-valid-dump.html
C-TS422-2021 Exam [2023] Dumps SAP PDF Questions: https://drive.google.com/open?id=1fo3O8ci0hu92c-EKOA1fSRwveqaC4jbM