2024 Best C-ABAPD-2309 Exam Preparation Material with New Dumps Questions
Free C-ABAPD-2309 Exam Files Verified & Correct Answers Downloaded Instantly
NEW QUESTION # 18
Which of the following results in faster access to internal tables? Note: There are 3 correct answers to this question.
- A. In a sorted internal table, specifying the primary key completely.
- B. In a hashed internal table, specifying the primary key completely.
- C. In a sorted internal table, specifying the primary key partially from the left without gaps.
- D. In a standard internal table, specifying the primary key partially from the left without gaps.
- E. In a hashed internal table, specifying the primary key partially from the left without gaps.
Answer: A,B,E
Explanation:
The access to internal tables can be optimized by using the appropriate table type and specifying the table key. The table key is a set of fields that uniquely identifies a row in the table and determines the sorting order of the table. The table key can be either the primary key or a secondary key. The primary key is defined by the table type and the table definition, while the secondary key is defined by the user using the KEY statement1.
The following results in faster access to internal tables:
B) In a sorted internal table, specifying the primary key completely. A sorted internal table is a table type that maintains a predefined sorting order, which is defined by the primary key in the table definition. The primary key can be either unique or non-unique. A sorted internal table can be accessed using the primary key or the table index. The access using the primary key is faster than the access using the table index, because the system can use a binary search algorithm to find the row. However, the primary key must be specified completely, meaning that all the fields of the primary key must be given in the correct order and without gaps2.
D) In a hashed internal table, specifying the primary key partially from the left without gaps. A hashed internal table is a table type that does not have a predefined sorting order, but uses a hash algorithm to store and access the rows. The primary key of a hashed internal table must be unique and cannot be changed. A hashed internal table can only be accessed using the primary key, not the table index. The access using the primary key is very fast, because the system can directly calculate the position of the row using the hash algorithm. The primary key can be specified partially from the left without gaps, meaning that some of the fields of the primary key can be omitted, as long as they are the rightmost fields and there are no gaps between the specified fields.
E) In a hashed internal table, specifying the primary key completely. A hashed internal table is a table type that does not have a predefined sorting order, but uses a hash algorithm to store and access the rows. The primary key of a hashed internal table must be unique and cannot be changed. A hashed internal table can only be accessed using the primary key, not the table index. The access using the primary key is very fast, because the system can directly calculate the position of the row using the hash algorithm. The primary key can be specified completely, meaning that all the fields of the primary key must be given in the correct order.
The following do not result in faster access to internal tables, because:
A) In a sorted internal table, specifying the primary key partially from the left without gaps. A sorted internal table is a table type that maintains a predefined sorting order, which is defined by the primary key in the table definition. The primary key can be either unique or non-unique. A sorted internal table can be accessed using the primary key or the table index. The access using the primary key is faster than the access using the table index, because the system can use a binary search algorithm to find the row. However, the primary key must be specified completely, meaning that all the fields of the primary key must be given in the correct order and without gaps. If the primary key is specified partially from the left without gaps, the system cannot use the binary search algorithm and has to perform a linear search, which is slower2.
C) In a standard internal table, specifying the primary key partially from the left without gaps. A standard internal table is a table type that does not have a predefined sorting order, but uses a sequential storage and access of the rows. The primary key of a standard internal table is the standard key, which consists of all the fields of the table row in the order in which they are defined. A standard internal table can be accessed using the primary key or the table index. The access using the primary key is slower than the access using the table index, because the system has to perform a linear search to find the row. The primary key can be specified partially from the left without gaps, but this does not improve the access speed, because the system still has to perform a linear search.
NEW QUESTION # 19
Refer to the Exhibit.
Image:
In the following ABAP SQL code, what are valid case distinctions? Note: There are 2 correct answers to this question.
- A.
- B.
- C.
- D.
Answer: A,C
NEW QUESTION # 20
In which products must you use the ABAP Cloud Development Model? Note: There are 2 correct answers to this question.
- A. SAP S/4HANA Cloud, public edition
- B. SAP BTP, ABAP environment
- C. SAP S/4HANA Cloud, private edition
- D. SAP S/4HANA on premise
Answer: B,C
Explanation:
The ABAP Cloud Development Model is the ABAP development model to build cloud-ready business apps, services, and extensions. It comes with SAP BTP and SAP S/4HANA. It works with public or private cloud, and even on-premise1. However, the complete ABAP Cloud Development Model, including the cloud-optimized ABAP language and public local SAP APIs and extension points, is available only in SAP BTP ABAP Environment and in the 2208/2022 versions of the SAP S/4HANA editions1. Therefore, you must use the ABAP Cloud Development Model in SAP BTP, ABAP environment and SAP S/4HANA Cloud, private edition. You can also use it in SAP S/4HANA on premise, but it is not mandatory. You cannot use it in SAP S/4HANA Cloud, public edition, because it does not allow custom ABAP code2. Reference: 1: ABAP Cloud | SAP Blogs 2: SAP S/4HANA Cloud Extensibility - Overview and Comparison | SAP Blogs
NEW QUESTION # 21
Which internal table type allows unique and non-unique keys?
- A. Sorted
- B. Hashed
- C. Standard
Answer: C
Explanation:
Explanation
The internal table type that allows both unique and non-unique keys is the standard table. A standard table has an internal linear index that can be used to access the table entries. The key of a standard table is always non-unique, which means that the table can contain duplicate entries. However, the system does not check the uniqueness of the key when inserting new entries, so the programmer can ensure that the key is unique by using appropriate logic. A standard table can be accessed either by using the table index or the key, but the response time for key access is proportional to the table size.
The other two internal table types, sorted and hashed, do not allow non-unique keys. A sorted table is filled in sorted order according to the defined table key, which must be unique. A sorted table can be accessed either by using the table index or the key, but the response time for key access is logarithmically proportional to the table size. A hashed table can only be accessed by using a unique key, which must be specified when declaring the table. A hashed table has no index, and the response time for key access is constant, regardless of the table size.
References: Internal Tables - ABAP Keyword Documentation, SAP ABAP: Types Of Internal Table Declaration - dan852.com
NEW QUESTION # 22
For the assignment, gv_target = gv_source.
which of the following data declarations will always work without truncation or rounding? Note: There are 2 correct answers to this question.
- A. DATA gv_source TYPE c. to DATA gv_target TYPE string.
- B. DATA gv_source TYPE string, to DATA gv_target TYPE c.
- C. DATA gv_source TYPE p LENGTH 8 DECIMALS 3. to DATA gv_target TYPE p LENGTH 16 DECIMALS 2.
- D. DATA gv_source TYPE d. to DATA gv_target TYPE string.
Answer: A,D
Explanation:
Explanation
The data declarations that will always work without truncation or rounding for the assignment gv_target = gv_source are B and C. This is because the target data type string is a variable-length character type that can hold any character string, including those of data types c (fixed-length character) and d (date). The assignment of a character or date value to a string variable will not cause any loss of information or precision, as the string variable will adjust its length to match the source value12.
You cannot do any of the following:
A: DATA gv_source TYPE string, to DATA gv_target TYPE c.: This data declaration may cause truncation for the assignment gv_target = gv_source. This is because the target data type c is a fixed-length character type that has a predefined length. If the source value of type string is longer than the target length of type c, the source value will be truncated on the right to fit the target length12.
D: DATA gv_source TYPE p LENGTH 8 DECIMALS 3. to DATA gv_target TYPE p LENGTH 16 DECIMALS 2.: This data declaration may cause rounding for the assignment gv_target = gv_source.
This is because the target data type p is a packed decimal type that has a predefined length and number of decimal places. If the source value of type p has more decimal places than the target type p, the source value will be rounded to the target number of decimal places12.
References: 1: ABAP Data Types - ABAP Keyword Documentation - SAP Online Help 2: ABAP Assignment Rules - ABAP Keyword Documentation - SAP Online Help
NEW QUESTION # 23
Given the following code in an SAP S/4HANA Cloud private edition tenant:
The class zcl_demo_class is in a software component with the language version set to "ABAP Cloud". The function module ZF1' is in a different software component with the language version set to "Standard ABAP".
Both the class and function module are customer created.
Regarding line #6, which of the following are valid statements? Note: There are 2 correct answers to this question.
- A. ZF1' can be called only if it is released for cloud development.
- B. 'ZF1' can be called if a wrapper is created for it and the wrapper itself is released for cloud development.
- C. "ZF1" can be called whether it is released or not for cloud development
- D. ZF1" can be called if a wrapper is created for it but the wrapper itself is not released for cloud development.
Answer: A,B
Explanation:
Explanation
The ABAP Cloud Development Model requires that only public SAP APIs and extension points are used to access SAP functionality and data. These APIs and extension points are released by SAP and documented in the SAP API BusinessHub1. Customer-created function modules are not part of the public SAP APIs and are not released for cloud development. Therefore, calling a function module directly from an ABAP Cloud class is not allowed and will result in a syntax error. However, there are two possible ways to call a function module indirectly from an ABAP Cloud class:
Create a wrapper class or interface for the function module and release it for cloud development. A wrapper is a class or interface that encapsulates the function module and exposes its functionality through public methods or attributes. The wrapper must be created in a software component with the language version set to "Standard ABAP" and must be marked as released for cloud development using the annotation @EndUserText.label. The wrapper can then be called from an ABAP Cloud class using the public methods or attributes2.
Use the ABAP Cloud Connector to call the function module as a remote function call (RFC) from an ABAP Cloud class. The ABAP Cloud Connector is a service that enables the secure and reliable communication between SAP BTP, ABAP environment and on-premise systems. The function module must be exposed as an RFC-enabled function module in the on-premise system and must be registered in the ABAP Cloud Connector. The ABAP Cloud class can then use the class cl_rfc_destination_service to get the destination name and the class cl_abap_system to create a proxy object for the function module. The proxy object can then be used to call the function module3.
References: 1: SAP API Business Hub 2: Creating an ABAP Cloud Project | SAP Help Portal 3: Calling Remote Function Modules | SAP Help Portal
NEW QUESTION # 24 
Using ABAP SQL, which select statement selects the mat field on line #17?
- A. SELECT mat FROM demo sales cds material ve...
- B. SELECT mat FROM Material...
- C. SELECT mat FROM demo_sales_so_i...
- D. SELECT mat FROM demo_sales_cds_so_i_ve...
Answer: D
Explanation:
Explanation
Using ABAP SQL, the select statement that selects the mat field on line #17 is:
SELECT mat FROM demo_sales_cds_so_i_ve...
This statement selects the mat field from the CDS view demo_sales_cds_so_i_ve, which is defined on line #1.
The CDS view demo_sales_cds_so_i_ve is a projection view that projects the fields of the CDS view demo_sales_cds_so_i, which is defined on line #2. The CDS view demo_sales_cds_so_i is a join view that joins the fields of the database table demo_sales_so_i, which is defined on line #3, and the CDS view demo_sales_cds_material_ve, which is defined on line #4. The CDS view demo_sales_cds_material_ve is a value help view that provides value help for the material field of the database table demo_sales_so_i. The mat field is an alias for the material field of the database table demo_sales_so_i, which is defined on line #91.
The other options are not valid because:
A). SELECT mat FROM Material... is not valid because Material is not a valid data source in the given code. There is no CDS view or database table named Material.
C). SELECT mat FROM demo_sales_so_i... is not valid because demo_sales_so_i is not a valid data source in the given code. There is no CDS view named demo_sales_so_i, only a database table. To access a database table, the keyword TABLE must be used, such as SELECT mat FROM TABLE demo_sales_so_i...
D). SELECT mat FROM demo sales cds material ve... is not valid because demo sales cds material ve is not a valid data source in the given code. There is no CDS view or database table named demo sales cds material ve. The correct name of the CDS view is demo_sales_cds_material_ve, with underscores instead of spaces.
References: 1: Projection Views - ABAP Keyword Documentation
NEW QUESTION # 25
Setting a field to read-only in which object would make the field read-only in all applications of the RESTful Application Programming model?
- A. Behaviour definition
- B. Service definition
- C. Projection view
- D. Metadata extension
Answer: A
Explanation:
Explanation
The object that can be used to set a field to read-only in all applications of the RESTful Application Programming model (RAP) is the behaviour definition. The behaviour definition is a CDS artefact that defines the business logic and the UI behaviour of a business object. A business object is a CDS entity that represents a business entity or concept, such as a customer, an order, or a product. The behaviour definition can specify the properties of the fields of a business object, such as whether they are mandatory, read-only, or transient. These properties are valid for all applications that use the business object, such as transactional, analytical, or draft-enabled apps12. For example:
The following code snippet defines a behaviour definition for a business object ZI_PB_APPLICATION.
It sets the field APPLICATION to read-only for all applications that use this business object:
define behavior for ZI_PB_APPLICATION { field ( read only ) APPLICATION; ... } You cannot do any of the following:
A). Service definition: A service definition is a CDS artefact that defines the interface and the binding of a service. A service is a CDS entity that exposes the data and the functionality of one or more business objects as OData, InA, or SQL services. A service definition can specify the properties of the fields of a service, such as whether they are filterable, sortable, or aggregatable. However, these properties are only valid for the specific service that uses the business object, not for all applications that use the business object12.
C). Projection view: A projection view is a CDS artefact that defines a view on one or more data sources, such as tables, views, or associations. A projection view can select, rename, or aggregate the fields of the data sources, but it cannot change the properties of the fields, such as whether they are read-only or not. The properties of the fields are inherited from the data sources or the behaviour definitions of the business objects12.
D). Metadata extension: A metadata extension is a CDS artefact that defines additional annotations for a CDS entity, such as a business object, a service, or a projection view. A metadata extension can specify the properties of the fields of a CDS entity for UI or analytical purposes, such as whether they are visible, editable, or hidden. However, these properties are only valid for the specific UI or analytical application that uses the metadata extension, not for all applications that use the CDS entity12.
References: 1: ABAP CDS - Data Definitions - ABAP Keyword Documentation - SAP Online Help 2: ABAP CDS - Behavior Definitions - ABAP Keyword Documentation - SAP Online Help
NEW QUESTION # 26
Which internal table type allows unique and non-unique keys?
- A. Sorted
- B. Hashed
- C. Standard
Answer: C
Explanation:
The internal table type that allows both unique and non-unique keys is the standard table. A standard table has an internal linear index that can be used to access the table entries. The key of a standard table is always non-unique, which means that the table can contain duplicate entries. However, the system does not check the uniqueness of the key when inserting new entries, so the programmer can ensure that the key is unique by using appropriate logic. A standard table can be accessed either by using the table index or the key, but the response time for key access is proportional to the table size.
The other two internal table types, sorted and hashed, do not allow non-unique keys. A sorted table is filled in sorted order according to the defined table key, which must be unique. A sorted table can be accessed either by using the table index or the key, but the response time for key access is logarithmically proportional to the table size. A hashed table can only be accessed by using a unique key, which must be specified when declaring the table. A hashed table has no index, and the response time for key access is constant, regardless of the table size.
NEW QUESTION # 27
In an Access Control Object, which clauses are used? Note: There are 3 correct answers to this question.
- A. Revoke (to remove access to the data source)
- B. Define role (to specify the role name)
- C. Return code (to assign the return code of the authority check)
- D. Where (to specify the access conditions)
- E. Crant (to identify the data source)
Answer: A,B,D
Explanation:
An Access Control Object (ACO) is a CDS annotation that defines the access control rules for a CDS view entity. An ACO consists of one or more clauses that specify the role name, the data source, the access conditions, and the return code of the authority check12. Some of the clauses that are used in an ACO are:
* Where (to specify the access conditions): This clause is used to define the logical expression that determines whether a user has access to the data source or not. The expression can use the fields of the data source, the parameters of the CDS view entity, or the predefined variables $user and $session. The expression can also use the functions check_authorization and check_role to perform additional authority checks12.
* Define role (to specify the role name): This clause is used to assign a name to the role that is defined by the ACO. The role name must be unique within the namespace of the CDS view entity and must not contain any special characters. The role name can be used to reference the ACO in other annotations, such as @AccessControl.authorizationCheck or @AccessControl.grant12.
* Revoke (to remove access to the data source): This clause is used to explicitly deny access to the data source for a user who meets the conditions of the where clause. The revoke clause overrides any grant clause that might grant access to the same user. The revoke clause can be used to implement the principle of least privilege or to enforce data segregation12.
You cannot do any of the following:
* Grant (to identify the data source): This is not a valid clause in an ACO. The grant clause is a separate annotation that is used to grant access to a CDS view entity or a data source for a user who has a specific role. The grant clause can reference an ACO by its role name to apply the access conditions defined by the ACO12.
* Return code (to assign the return code of the authority check): This is not a valid clause in an ACO. The return code of the authority check is a predefined variable that is set by the system after performing the access control check. The return code can be used in the where clause of the ACO to specify different access conditions based on the outcome of the check12.
References: 1: Access Control Objects - ABAP Keyword Documentation - SAP Online Help 2: Access Control in Core Data Services (CDS) | SAP Help Portal
NEW QUESTION # 28 
To adhere to the most recent ABAP SQL syntax conventions from SAP, on which line must you insert the
"INTO TABLE @gt flights" clause to complete the SQL statement?
- A. #4
- B. #6
- C. #8
- D. #15
Answer: A
Explanation:
Explanation
To adhere to the most recent ABAP SQL syntax conventions from SAP, you must insert the "INTO TABLE
@gt flights" clause on line #4 to complete the SQL statement. This is because the INTO or APPENDING clause should be specified immediately after the SELECT clause, according to the ABAP SQL syntax conventions1. The INTO or APPENDING clause defines the data object to which the results set of the SELECT statement is assigned. The data object can be an internal table, a work area, or an inline declaration.
In this case, the data object is an internal table named gt_flights, which is created using the inline declaration operator @DATA. The inline declaration operator allows you to declare and create a data object in the same statement where it is used, without the need for a separate DATA statement2.
The other lines are not suitable for inserting the "INTO TABLE @gt flights" clause, as they would violate the ABAP SQL syntax conventions or cause syntax errors. These lines are:
#6: This line is not suitable for inserting the "INTO TABLE @gt flights" clause, as it would cause a syntax error. This is because the FROM clause must be specified before the INTO or APPENDING clause, according to the ABAP SQL syntax conventions1. The FROM clause defines the data sources from which the data is read, such as database tables, CDS view entities, or CDS DDIC-based views. In this case, the data source is the database table flights.
#8: This line is not suitable for inserting the "INTO TABLE @gt flights" clause, as it would cause a syntax error. This is because the ORDER BY clause must be specified after the INTO or APPENDING clause, according to the ABAP SQL syntax conventions1. The ORDER BY clause defines the sort order of the results set of the SELECT statement. In this case, the results set is sorted by the fields carrid, connid, and fltime.
#15: This line is not suitable for inserting the "INTO TABLE @gt flights" clause, as it would violate the ABAP SQL syntax conventions. This is because the INTO or APPENDING clause should be specified as close as possible to the SELECT clause, according to the ABAP SQL syntax conventions1. The INTO or APPENDING clause should not be separated from the SELECT clause by other clauses, such as the WHERE clause, the GROUP BY clause, the HAVING clause, the UNION clause, or the ORDER BY clause. This is to improve the readability and maintainability of the ABAP SQL statement.
References: SELECT - ABAP Keyword Documentation, Inline Declarations - ABAP Keyword Documentation
NEW QUESTION # 29
What is the sequence priority when evaluating a logical expression?
- A. A B C
- B. AND 2
- C. A C B
- D. OR 3
- E. CAB
- F. B A C
- G. NOT 1
Answer: B
Explanation:
Explanation
The sequence priority when evaluating a logical expression is C. A C B, which means NOT, AND, OR. This is the order of precedence of the Boolean operators in ABAP, which determines how the system implicitly parenthesizes all logical expressions that are not closed by explicit parentheses. The operator with the highest priority is evaluated first, and the operator with the lowest priority is evaluated last. The order of precedence of the Boolean operators in ABAP is as follows12:
NOT: The NOT operator is a unary operator that negates the logical expression that follows it. It has the highest priority and is evaluated before any other operator. For example, in the expression NOT a AND b, the NOT operator is applied to a first, and then the AND operator is applied to the result and b.
AND: The AND operator is a binary operator that returns true if both logical expressions on its left and right are true, and false otherwise. It has the second highest priority and is evaluated before the OR and EQUIV operators. For example, in the expression a AND b OR c, the AND operator is applied to a and b first, and then the OR operator is applied to the result and c.
OR: The OR operator is a binary operator that returns true if either or both logical expressions on its left and right are true, and false otherwise. It has the third highest priority and is evaluated after the NOT and AND operators, but before the EQUIV operator. For example, in the expression a OR b EQUIV c, the OR operator is applied to a and b first, and then the EQUIV operator is applied to the result and c.
EQUIV: The EQUIV operator is a binary operator that returns true if both logical expressions on its left and right have the same truth value, and false otherwise. It has the lowest priority and is evaluated after all other operators. For example, in the expression a AND b EQUIV c OR d, the EQUIV operator is applied to a AND b and c last, after the AND and OR operators are applied.
References: 1: log_exp - Boolean Operators and Parentheses - ABAP Keyword Documentation - SAP Online Help 2: Logical Expressions (log_exp) - ABAP Keyword Documentation - SAP Online Help
NEW QUESTION # 30
Exhibit:
With Icl_super being superclass for Icl_subl and Icl_sub2 and with methods subl_methl and sub2_methl being subclass-specific methods of Id_subl or Icl_sub2, respectivel. What will happen when executing these casts? Note:
There are 2 correct answers to this question
- A. go_sub2 = CAST # go super), will work. go_subl CAST #go_super), will work
- B. go_sub2 = CAST #(go_super). will not work. ] go sub2->sub2 meth 1(...). will work
- C. go_subl->subl_meth !(...)* w'll work.
- D. go subl = CAST # go super), will not work
Answer: C,D
Explanation:
The following are the explanations for each statement:
A: This statement is correct. go_subl = CAST #(go_super) will not work. This is because go_subl is a data object of type REF TO cl_subl, which is a reference to the subclass cl_subl. go_super is a data object of type REF TO cl_super, which is a reference to the superclass cl_super. The CAST operator is used to perform a downcast or an upcast of a reference variable to another reference variable of a compatible type. A downcast is a conversion from a more general type to a more specific type, while an upcast is a conversion from a more specific type to a more general type. In this case, the CAST operator is trying to perform a downcast from go_super to go_subl, but this is not possible, as go_super is not pointing to an instance of cl_subl, but to an instance of cl_super. Therefore, the CAST operator will raise an exception CX_SY_MOVE_CAST_ERROR at runtime12 B: This statement is incorrect. go_sub2 = CAST #(go_super) will work. go_subl = CAST #(go_super) will not work. This is because go_sub2 is a data object of type REF TO cl_sub2, which is a reference to the subclass cl_sub2. go_super is a data object of type REF TO cl_super, which is a reference to the superclass cl_super. The CAST operator is used to perform a downcast or an upcast of a reference variable to another reference variable of a compatible type. A downcast is a conversion from a more general type to a more specific type, while an upcast is a conversion from a more specific type to a more general type. In this case, the CAST operator is trying to perform a downcast from go_super to go_sub2, and this is possible, as go_super is pointing to an instance of cl_sub2, which is a subclass of cl_super. Therefore, the CAST operator will assign the reference of go_super to go_sub2 without raising an exception. However, the CAST operator will not work for go_subl, as explained in statement A12 C: This statement is incorrect. go_sub2 = CAST #(go_super) will work. go_sub2->sub2_meth1(...) will not work. This is because go_sub2 is a data object of type REF TO cl_sub2, which is a reference to the subclass cl_sub2. go_super is a data object of type REF TO cl_super, which is a reference to the superclass cl_super. The CAST operator is used to perform a downcast or an upcast of a reference variable to another reference variable of a compatible type. A downcast is a conversion from a more general type to a more specific type, while an upcast is a conversion from a more specific type to a more general type. In this case, the CAST operator is trying to perform a downcast from go_super to go_sub2, and this is possible, as go_super is pointing to an instance of cl_sub2, which is a subclass of cl_super. Therefore, the CAST operator will assign the reference of go_super to go_sub2 without raising an exception. However, the method call go_sub2->sub2_meth1(...) will not work, as sub2_meth1 is a subclass-specific method of cl_sub2, which is not inherited by cl_super. Therefore, the method call will raise an exception CX_SY_DYN_CALL_ILLEGAL_METHOD at runtime123 D: This statement is correct. go_subl->subl_meth1(...) will work. This is because go_subl is a data object of type REF TO cl_subl, which is a reference to the subclass cl_subl. subl_meth1 is a subclass-specific method of cl_subl, which is not inherited by cl_super. Therefore, the method call go_subl->subl_meth1(...) will work, as go_subl is pointing to an instance of cl_subl, which has the method subl_meth1123
NEW QUESTION # 31
Exhibit:
What are valid statements? Note: There are 3 correct answers to this question.
- A. Instead of go_cll = NEW #() you could use go_iff - NEW #(...).
- B. Instead of go ell = NEW #(...) you could use go ifl = NEW cll(. ... ).
- C. go_if 1 may call method ml with go_ift->ml().
- D. go_ifl may call method m2 with go if->m2(...).
- E. go_cll may call method ml with go_dl->ifl-ml().
Answer: B,C,D
Explanation:
The following are the explanations for each statement:
* A: This statement is valid. go_ifl may call method ml with go_ifl->ml(). This is because go_ifl is a data object of type REF TO ifl, which is a reference to the interface ifl. The interface ifl defines a method ml, which can be called using the reference variable go_ifl. The class cll implements the interface ifl, which means that it provides an implementation of the method ml. The data object go_ifl is assigned to a new instance of the class cll using the NEW operator and the inline declaration operator @DATA. Therefore, when go_ifl->ml() is called, the implementation of the method ml in the class cll is executed123
* B: This statement is valid. Instead of go_cll = NEW #(...) you could use go_ifl = NEW cll(...). This is because go_ifl is a data object of type REF TO ifl, which is a reference to the interface ifl. The class cll implements the interface ifl, which means that it is compatible with the interface ifl. Therefore, go_ifl can be assigned to a new instance of the class cll using the NEW operator and the class name cll. The inline declaration operator @DATA is optional in this case, as go_ifl is already declared. The parentheses after the class name cll can be used to pass parameters to the constructor of the class cll, if any123
* E: This statement is valid. go_ifl may call method m2 with go_ifl->m2(...). This is because go_ifl is a data object of type REF TO ifl, which is a reference to the interface ifl. The class cll implements the interface ifl, which means that it inherits all the components of the interface ifl. The class cll also defines a method m2, which is a public method of the class cll. Therefore, go_ifl can call the method m2 using the reference variable go_ifl. The method m2 is not defined in the interface ifl, but it is accessible through the interface ifl, as the interface ifl is implemented by the class cll. The parentheses after the method name m2 can be used to pass parameters to the method m2, if any123 The other statements are not valid, as they have syntax errors or logical errors. These statements are:
* C: This statement is not valid. go_cll may call method ml with go_cll->ifl~ml(). This is because go_cll is a data object of type REF TO cll, which is a reference to the class cll. The class cll implements the interface ifl, which means that it inherits all the components of the interface ifl. The interface ifl defines a method ml, which can be called using the reference variable go_cll. However, the syntax for calling an interface method using a class reference is go_cll->ml(), not go_cll->ifl~ml(). The interface component selector ~ is only used when calling an interface method using an interface reference, such as go_ifl->ifl~ml(). Using the interface component selector ~ with a class reference will cause a syntax error123
* D: This statement is not valid. Instead of go_cll = NEW #() you could use go_ifl = NEW #(...). This is because go_ifl is a data object of type REF TO ifl, which is a reference to the interface ifl. The interface ifl cannot be instantiated, as it does not have an implementation. Therefore, go_ifl cannot be assigned to a new instance of the interface ifl using the NEW operator and the inline declaration operator @DATA.
This will cause a syntax error or a runtime error. To instantiate an interface, you need to use a class that implements the interface, such as the class cll123 References: INTERFACES - ABAP Keyword Documentation, CLASS - ABAP Keyword Documentation, NEW - ABAP Keyword Documentation
NEW QUESTION # 32
What RESTful Application Programming object contains only the fields required for a particular app?
- A. Metadata extension
- B. Projection View
- C. Database view
- D. Data model view
Answer: B
Explanation:
A projection view is a RESTful Application Programming object that contains only the fields required for a particular app. A projection view is a CDS view entity that defines a projection on an existing CDS view entity or CDS DDIC-based view. A projection view exposes a subset of the elements of the projected entity, which are relevant for a specific business service. A projection view can also define aliases, virtual elements, and annotations for the projected elements. A projection view is the top-most layer of a CDS data model and prepares data for a particular use case. A projection view can have different provider contracts depending on the type of service it supports, such as transactional query, analytical query, or transactional interface.
A database view is a CDS DDIC-based view that defines a join or union of database tables. A database view has an SQL view attached and can be accessed by Open SQL or native SQL. A database view can be used as a projected entity for a projection view, but it does not contain only the fields required for a particular app.
A metadata extension is a RESTful Application Programming object that defines additional annotations for a CDS view entity or a projection view. A metadata extension can be used to enhance the metadata of a CDS data model without changing the original definition. A metadata extension does not contain any fields, but only annotations.
A data model view is a CDS view entity that defines a data model based on database tables or other CDS view entities. A data model view can have associations, aggregations, filters, parameters, and annotations. A data model view can be used as a projected entity for a projection view, but it does not contain only the fields required for a particular app.
NEW QUESTION # 33
Which of the following is a generic internal table type?
- A. HASHED TABLE
- B. INDEX TABLE
- C. SORTED TABLE
- D. STANDARD TABLE
Answer: B
Explanation:
Explanation
A generic internal table type is a table type that does not define all the attributes of an internal table in the ABAP Dictionary; it leaves some of these attributes undefined. A table type is generic in the following cases1:
You have selected Index Table or Not Specified as the access type.
You have not specified a table key or specified an incomplete table key.
You have specified a generic secondary table key.
A generic table type can be used only for typing formal parameters or field symbols. A generic table type cannot be used for defining data objects or constants2.
Therefore, the correct answer is B. INDEX TABLE, which is a generic table type that does not specify the access type or the table key. The other options are not generic table types, because:
A: SORTED TABLE is a table type that specifies the access type as sorted and the table key as a unique or non-unique primary key3.
C: STANDARD TABLE is a table type that specifies the access type as standard and the table key as a non-unique standard key that consists of all the fields of the table row in the order in which they are defined4.
D: HASHED TABLE is a table type that specifies the access type as hashed and the table key as a unique primary key5.
References: 1: Generic Table Types - ABAP Dictionary - SAP Online Help 2: Generic ABAP Types - ABAP Keyword Documentation - SAP Online Help 3: Sorted Tables - ABAP Keyword Documentation - SAP Online Help 4: Standard Tables - ABAP Keyword Documentation - SAP Online Help 5: Hashed Tables - ABAP Keyword Documentation - SAP Online Help
NEW QUESTION # 34
Which ABAP SQL clause allows the use of inline declarations?
- A. INTO CORRESPONDING FIELDS OF
- B. FIELDS
- C. INTO
- D. FROM
Answer: C
Explanation:
The ABAP SQL clause that allows the use of inline declarations is the INTO clause. The INTO clause is used to specify the target variable or field symbol where the result of the SQL query is stored. The INTO clause can use inline declarations to declare the target variable or field symbol at the same position where it is used, without using a separate DATA or FIELD-SYMBOLS statement. The inline declaration is performed using the DATA or @DATA operators in the declaration expression12. For example:
The following code snippet uses the INTO clause with an inline declaration to declare a local variable itab and store the result of the SELECT query into it:
SELECT * FROM scarr INTO TABLE @DATA (itab).
The following code snippet uses the INTO clause with an inline declaration to declare a field symbol <fs> and store the result of the SELECT query into it:
SELECT SINGLE * FROM scarr INTO @<fs>.
You cannot do any of the following:
FROM: The FROM clause is used to specify the data source of the SQL query, such as a table, a view, or a join expression. The FROM clause does not allow the use of inline declarations12.
INTO CORRESPONDING FIELDS OF: The INTO CORRESPONDING FIELDS OF clause is used to specify the target structure or table where the result of the SQL query is stored. The INTO CORRESPONDING FIELDS OF clause does not allow the use of inline declarations. The target structure or table must be declared beforehand using a DATA or FIELD-SYMBOLS statement12.
FIELDS: The FIELDS clause is used to specify the columns or expressions that are selected from the data source of the SQL query. The FIELDS clause does not allow the use of inline declarations. The FIELDS clause must be followed by an INTO clause that specifies the target variable or field symbol where the result is stored12.
NEW QUESTION # 35
In RESTful Application Programming, a business object contains which parts? Note: There are 2 correct answers to this question.
- A. Process definition
- B. CDS view
- C. Authentication rules
- D. Behavior definition
Answer: B,D
Explanation:
In RESTful Application Programming, a business object contains two main parts: a CDS view and a behavior definition1.
A) CDS view: A CDS view is a data definition that defines the structure and the data source of a business object. A CDS view can consist of one or more entities that are linked by associations or compositions. An entity is a CDS view element that represents a node or a projection of a business object. An entity can have various annotations that define the metadata and the semantics of the business object2.
B) Behavior definition: A behavior definition is a source code artifact that defines the behavior and the validation rules of a business object. A behavior definition can specify the standard CRUD (create, read, update, delete) operations, the draft handling, the authorization checks, and the side effects for a business object. A behavior definition can also define custom actions, validations, and determinations that implement the business logic of a business object3.
The following are not parts of a business object in RESTful Application Programming, because:
C) Authentication rules: Authentication rules are not part of a business object, but part of a service binding. A service binding is a configuration artifact that defines how a business object is exposed as an OData service. A service binding can specify the authentication method, the authorization scope, the protocol version, and the service options for the OData service4.
D) Process definition: Process definition is not part of a business object, but part of a workflow. A workflow is a business process that orchestrates the tasks and the events of a business object. A workflow can be defined using the Workflow Editor in the SAP Business Application Studio or the SAP Web IDE. A workflow can use the business object's APIs to trigger or consume events, execute actions, or read or update data5.
NEW QUESTION # 36
Which RESTful Application Programming object can be used to organize the display of fields in an app?
- A. Service definition
- B. Projection view
- C. Metadata extension
- D. Data model view
Answer: C
Explanation:
Explanation
A metadata extension is a RESTful Application Programming object that can be used to organize the display of fields in an app. A metadata extension is a CDS view that annotates another CDS view with UI annotations, such as labels, icons, or facets. These annotations define how the data should be presented in the app, such as which fields should be shown on the object page, which fields should be editable, or which fields should be used for filtering or sorting. A metadata extension can also be used to add custom actions or validations to the app12. References: 1: Refine the Object Page with Annotations | SAP Tutorials 2: ABAP RAP : Enabling custom actions with a dialog for additional input fields | SAP Blogs
NEW QUESTION # 37
Refer to the Exhibit.
Which of the following types are permitted to be used for <source> on line #4? Note: There are 2 correct answers to this question.
- A. A database table from the ABAP Dictionary
- B. A CDS DDIC-based view
- C. An external view from the ABAP Dictionary
- D. A database view from the ABAP Dictionary
Answer: A,B
Explanation:
The <source> clause in the CDS View Entity Data Definition can be used to specify the data source for the view entity. The <source> clause can accept different types of data sources, depending on the type of the view entity1.
A database table from the ABAP Dictionary: This is a valid type of data source for a CDS View Entity Data Definition. A database table from the ABAP Dictionary is a table that is defined in the ABAP Dictionary using the keyword TABLE or TABLE OF. The name of the database table must be unique within its namespace and must not contain any special characters2.
A CDS DDIC-based view: This is also a valid type of data source for a CDS View Entity Data Definition. A CDS DDIC-based view is a view that is defined in the Core Data Services using the keyword DEFINE VIEW ENTITY. The name of the CDS DDIC-based view must be unique within its namespace and must not contain any special characters3.
You cannot do any of the following:
An external view from the ABAP Dictionary: This is not a valid type of data source for a CDS View Entity Data Definition. An external view from the ABAP Dictionary is a view that is defined in an external application using any language supported by SAP, such as SQL, PL/SQL, or Java. The name of the external view must be unique within its namespace and must not contain any special characters4.
A database view from the ABAP Dictionary: This is not a valid type of data source for a CDS View Entity Data Definition. A database view from the ABAP Dictionary is a view that is defined in an external application using any language supported by SAP, such as SQL, PL/SQL, or Java. The name of the database view must be unique within its namespace and must not contain any special characters4.
NEW QUESTION # 38
After you created a database table in the RESTful Application Programming model, what do you create next?
- A. A data model view
- B. A projection view
- C. A service definition
- D. A metadata extension
Answer: B
Explanation:
After you created a database table in the RESTful Application Programming model (RAP), the next step is to create a projection view on the database table. A projection view is a CDS artefact that defines a view on one or more data sources, such as tables, views, or associations. A projection view can select, rename, or aggregate the fields of the data sources, but it cannot change the properties of the fields, such as whether they are read-only or not. The properties of the fields are inherited from the data sources or the behaviour definitions of the business objects12. For example:
The following code snippet defines a projection view ZI_AGENCY on the database table /DMO/AGENCY:
define view ZI_AGENCY as select from /dmo/agency { key agency_id, agency_name, street, city, region, postal_code, country, phone_number, url } The projection view is used to expose the data of the database table to the service definition, which is the next step in the RAP. The service definition is a CDS artefact that defines the interface and the binding of a service. A service is a CDS entity that exposes the data and the functionality of one or more business objects as OData, InA, or SQL services. A service definition can specify the properties of the fields of a service, such as whether they are filterable, sortable, or aggregatable12. For example:
The following code snippet defines a service definition ZI_AGENCY_SRV that exposes the projection view ZI_AGENCY as an OData service:
define service ZI_AGENCY_SRV { expose ZI_AGENCY as Agency; }
You cannot do any of the following:
A) A metadata extension: A metadata extension is a CDS artefact that defines additional annotations for a CDS entity, such as a business object, a service, or a projection view. A metadata extension can specify the properties of the fields of a CDS entity for UI or analytical purposes, such as whether they are visible, editable, or hidden. However, a metadata extension is not the next step after creating a database table in the RAP, as it is not required to expose the data of the database table to the service definition. A metadata extension can be created later to customize the UI or analytical application that uses the service12.
C) A data model view: A data model view is a CDS artefact that defines a view on one or more data sources, such as tables, views, or associations. A data model view can select, rename, or aggregate the fields of the data sources, and it can also change the properties of the fields, such as whether they are read-only or not. The properties of the fields are defined by the annotations or the behaviour definitions of the data model view. A data model view is used to define the data model of a business object, which is a CDS entity that represents a business entity or concept, such as a customer, an order, or a product. However, a data model view is not the next step after creating a database table in the RAP, as it is not required to expose the data of the database table to the service definition. A data model view can be created later to define a business object that uses the database table as a data source12.
D) A service definition: A service definition is a CDS artefact that defines the interface and the binding of a service. A service is a CDS entity that exposes the data and the functionality of one or more business objects as OData, InA, or SQL services. A service definition can specify the properties of the fields of a service, such as whether they are filterable, sortable, or aggregatable. However, a service definition is not the next step after creating a database table in the RAP, as it requires a projection view or a data model view to expose the data of the database table. A service definition can be created after creating a projection view or a data model view on the database table12.
NEW QUESTION # 39
What are some properties of database tables? Note: There are 2 correct answers to this question.
- A. They can have relationships to other tables.
- B. They can have any number of key fields.
- C. They may have key fields.
- D. They store information in two dimensions.
Answer: A,D
Explanation:
Explanation
Database tables are data structures that store information in two dimensions, using rows and columns. Each row represents a record or an entity, and each column represents an attribute or a field. Database tables may have key fields, which are columns that uniquely identify each row or a subset of rows. Key fields can be used to enforce data integrity, perform efficient searches, and establish relationships to other tables. Database tables can have relationships to other tables, which are associations or links between the key fields of two or more tables. Relationships can be used to model the logical connections between different entities, join data from multiple tables, and enforce referential integrity12.
References: 1: Table (database) - Wikipedia 2: Database design basics - Microsoft Support
NEW QUESTION # 40
......
SAP C-ABAPD-2309 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
Instant Download C-ABAPD-2309 Dumps Q&As Provide PDF&Test Engine: https://www.actual4exams.com/C-ABAPD-2309-valid-dump.html
Fast Exam Updates C-ABAPD-2309 dumps with PDF Test Engine Practice: https://drive.google.com/open?id=1dS8GKy9zYuxs7V4cfak4AAv871wnHJQY