350-501 Braindumps Real Exam Updated on Apr 19, 2024 with 451 Questions
Latest 350-501 PDF Dumps & Real Tests Free Updated Today
Cisco 350-501 exam is a certification exam that focuses on implementing and operating service provider network core technologies. 350-501 exam validates the skills and knowledge of IT professionals working with service provider network technologies. 350-501 exam covers a range of topics such as network architecture, automation, routing protocols, virtualization, and security. Passing 350-501 exam enables professionals to demonstrate their expertise in implementing and operating service provider network core technologies, which can open up new career opportunities in the rapidly growing field of service provider networking.
NEW QUESTION # 208
Refer to the exhibit.
Which type of DDoS attack will be mitigated by this configuration?
- A. teardrop attack
- B. SIP INVITE flood attacks
- C. smurf attack
- D. SYN flood
Answer: C
NEW QUESTION # 209
A network architect decides to expand the scope of the multicast deployment within the company network. The network is already using PIM-SM with a static RP that supports a high-bandwidth, video-based training application that is heavily used by the employees, but excessive bandwidth usage is a concern. How must the engineer update the network to provide a more efficient multicast implementation?
- A. Implement BSR to support dynamic RP notification.
- B. Configure IGMP to manage the multicast hosts on each LAN
- C. Deploy ICMP to Improve multicast reachability across the network using static RP.
- D. Implement STP to improve switching performance for multicast data.
Answer: B
NEW QUESTION # 210
A network engineer is adding 10Gbps link to an existing 2X1Gbps LACP-based LAG to augment its capacity. Network standards require a bundle interface to be take out of service if one of its member links does down, and the new link must be added with minimal impact to the production network. Drag and drop the tasks that the engineer must perform from the left into the sequence on the right. Not all options are used.
Answer:
Explanation:
NEW QUESTION # 211 
Refer to the exhibit. This configuration is being applied on an IOS XR router.
Which statement about this configuration is true?
- A. It is used to set up configuration to poll network data.
- B. It is used to enable gRPC.
- C. It is used to create a streaming subscription with a 600-second interval.
- D. It is used to create a streaming subscription with a 60-Second interval.
Answer: D
Explanation:
Section: Automation and Assurance
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/routers/asr9000/software/telemetry/b-telemetry-cg-asr9000-
62x/b-telemetry-config-guide-asr9000_chapter_01.html
NEW QUESTION # 212
Refer to the exhibit:
Which two statements about the ISIS topology are true? (Choose two.)
- A. R1 and R2 are Level 2 neighbors.
- B. All four routers are operating as Level 2 routers only.
- C. R1 and R4 are Level 2 neighbors
- D. All four routers are operating as Level 1-2 routers.
- E. All four routers are operating as Level 1 routers only.
Answer: A,D
NEW QUESTION # 213
Refer to the exhibit.
Which additional configuration must an engineer apply to the edge router to inject a default route into the MP-BGP address family for the internet_shared_service dedicated VRF?
A)
B)
C)
D)
- A. Option C
- B. Option A
- C. Option B
- D. Option D
Answer: D
NEW QUESTION # 214 
Refer to the exhibit. An engineer began to configure LDP between R1 and R2, but R1 and R2 cannot yet establish an LDP TCP connection. Which additional task must be completed to finish the implementation?
- A. Configure the mpls ldp neighbor 172.16.0.1 password command on R1
- B. Configure the no mpls ldp password option 1 command on R1
- C. Configure the no mpls ldp password option 1 command on R2
- D. Configure the mpls ldp neighbor 10.0.12.1 password command on R1
Answer: C
Explanation:
Section: MPLS and Segment Routing
NEW QUESTION # 215
Refer to the exhibit.
While troubleshooting the network, a network operator with an employee id: 3812:12:993 is trying to ping XR1. Which result should the operator expect when trying to ping to an XR1 local address?
- A. ICMP traffic works at a policed rate of 19 bytes per second every 100 ms
- B. All ICMP traffic is dropped.
- C. ICMP traffic works at a policed rate of 19 packets every 100 ms.
- D. All ICMP traffic responds successfully.
Answer: D
NEW QUESTION # 216
What is the role of NSO in network automation?
- A. It is a tool that uses CLl only to configure virtual network devices.
- B. It Is a type of REST API used to configure an APIC.
- C. It is a tool used to bridge automation to the physical network infrastructure.
- D. It is GUI used to manage wireless devices in a campus infrastructure.
Answer: C
Explanation:
https://www.cisco.com/c/en/us/products/collateral/cloud-systems-management/network-services-orchestrator/datasheet-c78-734576.html
NEW QUESTION # 217
Refer to the exhibit.
A network engineer Is implementing OSPF multiare
a. Which command on interface G0/1 resolves adjacency Issues in the new area?
- A. Ip ospf network broadcast
- B. Ip ospf network point-to-point
- C. Ip ospf network polnt-to-multlpoint
- D. Ip ospf network non-broadcast
Answer: B
Explanation:
https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_ospf/configuration/xe-16/iro-xe-16-book/iro-multi-area-adj-xe.html
NEW QUESTION # 218
An engineer must apply an 802.1ad-compliant configuration to a new switchport with these requirements:
The switchport must tag all traffic when it enters the port.
The switchport is expected to provide the same level of service to traffic from any customer VLAN.
Which configuration must the engineer use?
- A. interface GigabitEthernet1/0/1
ethernet dot1ad uni c-port
service instance 12
encapsulation dot1q
rewrite ingress tag push dot1ad 21 symmetric
bridge-domain 12 - B. interface GigabitEthernet1/0/1
ethernet dot1ad nni
service instance 12
encapsulation dot1ad
bridge-domain 12 - C. interface GigabitEthernet1/0/1
switchport mode trunk
switchport trunk encapsulation dot1q
encapsulation ISL
bridge-domain 12 - D. interface GigabitEthernet1/0/1
ethernet dot1ad uni s-port
service instance 12
encapsulation default
rewrite ingress tag push dot1ad 21 symmetric
bridge-domain 12
Answer: D
NEW QUESTION # 219
Refer to the exhibit.
Refer to the exhibit. ISP ASN 65100 provides Internet services to router CE-1 and receives customer prefix 198.18.18.0/24 via eBGP. An administrator for the ISP is now provisioning RTBH services to provide on-demand data-plane security for the customer's IP space. Which route-map configuration must the administrator apply to router RTBH-1 to complete the implementation of RTBH services to CE-1?
- A. route-map RTBH-CUSTOMER-IN permit 10
description AS65001
match ip address prefix-list AS65001-PREFIXES
match community 99
set local-preference 200
set community no-export additive
set ip next-hop 192.168.255.255
route-map RTBH-CUSTOMER-IN deny 65535
description DEFAULT DENY - B. route-map RTBH-CUSTOMER-IN permit 10
description AS65001
match ip address prefix-list AS65001-PREFIXES
match community 99
set local-preference 200
set community no-advertise additive
set ip next-hop 192.168.255.255
route-map RTBH-CUSTOMER-IN deny 65535
description DEFAULT DENY - C. route-map RTBH-CUSTOMER-IN permit 10
description AS65001
match ip address prefix-list AS65001-PREFIXES
match community 99
set local-preference 200
set community local-as additive
set ip next-hop 192.168.255.255
route-map RTBH-CUSTOMER-IN deny 65535
description DEFAULT DENY - D. route-map RTBH-CUSTOMER-IN permit 10
description AS65001
match ip address prefixlist AS65001-PREFIXES
match community 99
set local-preference 200
set community no-advertise additive
set ip next-hop local-address
route-map RTBH-CUSTOMER-IN deny 65535
description DEFAULT DENY
Answer: A
NEW QUESTION # 220
Refer to the exhibit. What is significant about the number 2 in the configuration?
- A. It dictates the number of sessions that can be open with the SNMP manager
- B. It indicates two SNMP managers can read and write with the agent using community string cisco test
- C. It represents the version of SNMP running
- D. It is the numeric name of the ACL that contains the list of SNMP managers with access to the agent
Answer: D
NEW QUESTION # 221
Refer to the exhibit. A network engineer notices that router R2 is failing to install network
172.16.33.1/32 in the routing table.
Which configuration must the engineer apply to R2 to fix the problem?
- A. R2(config)# access-list 1 permit 172.16.33.0 255.0.0.0
- B. R2(config)# access-list 1 permit 172.16.33.0 255.255.0.0
- C. R2(config)# access-list 1 permit 172.16.33.0 255.255.255.0
- D. R2(config)# access-list 1 permit 172.16.33.0 0.0.0.255
Answer: D
NEW QUESTION # 222
A network engineer Is implementing a QoS policy for outbound management traffic classification and marking on a CPE device with these requirements:
A network engineer Is implementing a QoS policy for outbound management traffic classification and marking on a CPE device with these requirements
* Management protocols must be marked with DSCP AF class 2 w4h low drop probability.
* Monitoring protocols must be marked with DSCP AF class 1 with low drop probability.
* All remaining traffic must be marked with a DSCP value of 0.
Which configuration must the engineer implement to satisfy the requirements?
A)
B)
C)
D)
- A. Option A
- B. Option B
- C. Option C
- D. Option D
Answer: C
Explanation:
https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus1000/sw/4_0/qos/configuration/guide/nexus1000v_qos/qos_6dscp_val.pdf
NEW QUESTION # 223
Refer to the exhibit. Which statement about the status of the neighbor relationship between R1 and R2 is true?
- A. The neighbor relationship is down because the two routers are in the same subnet.
- B. The neighbor relationship is up because R2 is level 1 and level 2 router.
- C. The neighbor relationship is down because R2 is operating as a Level 1 router and the two routers are in different area
- D. The neighbor relationship is down because the two routers are configured with different area types
Answer: C
NEW QUESTION # 224
Reter to the exhibit. ISP A provides VPLS services and DDoS protection to Company XYZ to connect their branches across the North America and Europe regions. The uplink from the data center to the ISP is 100 Mbps. The Company XYZ security team asked the ISP to redirect ICMP echo requests, which are currently going to the web server, to a new local security appliance.
Which configuration must an ISP engineer apply to router R2 to redirect the ICMP traffic?
- A. class-map type traffic match-all B_210.10.65.1
match destination-address ipv4 210.10.65.1
match protocol 3
match ipv4 icmp-type 5 - B. class-map type traffic match-all B_210.10.65.1
match destination-address ipv4 210.10.65.1
match protocol 7
match ipv4 icmp-type 3 - C. class-map type traffic match-all B_210.10.65.1
match destination-address ipv4 210.10.65.1
match protocol 1
match ipv4 icmp-type 8 - D. class-map type traffic match-all B_210.10.65.1
match destination-address ipv4 210.10.65.1
match protocol 6
match ipv4 icmp-type 9
Answer: C
NEW QUESTION # 225
......
350-501 Dumps With 100% Verified Q&As - Pass Guarantee or Full Refund: https://www.actual4exams.com/350-501-valid-dump.html
Pass Cisco 350-501 Exam With Practice Test Questions Dumps Bundle: https://drive.google.com/open?id=16rqLP0Pexo_GYQeiCCp2N8YkeUBgS_0c