Ace RedHat EX200 Certification with Actual Questions Jun 09, 2024 Updated
2024 The Most Effective EX200 with 136 Questions Answers
Becoming RHCSA certified opens up a range of career opportunities for IT professionals. RHCSA certified professionals are highly sought after by employers who need skilled Linux system administrators to manage their IT infrastructure. Red Hat Certified System Administrator - RHCSA certification demonstrates to employers that the candidate has the skills and knowledge necessary to perform critical tasks in a Linux environment. Additionally, RHCSA certified professionals are often able to command higher salaries than their non-certified counterparts.
The RedHat EX200 exam consists of performance-based tasks that require candidates to demonstrate their proficiency in managing and administering Red Hat Enterprise Linux systems. The tasks cover various areas such as file systems and storage management, user and group administration, network configuration, and system security. Candidates are required to complete these tasks within a specific time frame, which puts their time management and decision-making skills to the test.
NEW QUESTION # 14
Create a volume group, and set 16M as a extends. And divided a volume group containing 50 extends on volume group lv, make it as ext4 file system, and mounted automatically under /mnt/data.
Answer:
Explanation:
Answer see in the explanation.
Explanation/Reference:
# pvcreate /dev/sda7 /dev/sda8
# vgcreate -s 16M vg1 /dev/sda7 /dev/sda8
# lvcreate -l 50 -n lvm02
# mkfs.ext4 /dev/vg1/lvm02
# blkid /dev/vg1/lv1
# vim /etc/fstab
# mkdir -p /mnt/data
UUID=xxxxxxxx /mnt/data ext4 defaults 0 0
# vim /etc/fstab
# mount -a
# mount
(Verify)
NEW QUESTION # 15
SIMULATION
Please open the ip_forward, and take effect permanently.
Answer:
Explanation:
See explanation below.
Explanation/Reference:
Explanation:
vim /etc/sysctl.conf net.ipv4.ip_forward = 1
sysctl -w (takes effect immediately)
If no "sysctl.conf" option, use these commands:
sysctl -a |grep net.ipv4
sysctl -P net.ipv4.ip_forward = 1
sysctl -w
NEW QUESTION # 16
SIMULATION
Configure your web services, download from http://instructor.example.com/pub/serverX.html And the services must be still running after system rebooting.
Answer:
Explanation:
See explanation below.
Explanation/Reference:
Explanation: cd /var/www/html
wget http://instructor.example.com/pub/serverX.html mv serverX.html index.html /etc/init.d/httpd restart chkconfig httpd on
NEW QUESTION # 17
In the system, mounted the iso image /root/examine.iso to/mnt/iso directory. And enable automatically mount (permanent mount) after restart system.
Answer:
Explanation:
see explanation below.
Explanation
mkdir -p /mnt/iso
/etc/fstab:
/root/examine.iso /mnt/iso iso9660 loop 0 0 mount -a
mount | grep examine
NEW QUESTION # 18
Configure the NTP service in your system.
Answer:
Explanation:
see explanation below.
Explanation
system-config-date &
NEW QUESTION # 19
Create a 512M partition, make it as ext4 file system, mounted automatically under /mnt/data and which take effect automatically at boot-start.
Answer:
Explanation:
see explanation below.
Explanation
# fdisk /dev/vda
n
+512M
w
# partprobe /dev/vda
# mkfs -t ext4 /dev/vda5
# mkdir -p /data
# vim /etc/fstab
/dev/vda5 /data ext4 defaults 0 0
# mount -a
NEW QUESTION # 20
How is cloud-init integrated with a managed system image?
- A. cloud-init provides the cloud-init-daemonservice which is launched during startup and keeps the
instance in sync with the desired configuration. - B. cloud-init provides a Linux kernel module that must be included and loaded in the instance's initramfs.
- C. cloud-init provides its own startup mechanism which replaces the instance's original init system, such as
systemd. - D. cloud-init provides systemd units which must be included in several stages of the booting process of the
instance. - E. cloud-init provides the cloud-init-workercommand which has to be invoked periodically within the
running instance.
Answer: B
NEW QUESTION # 21
Create a Shared Directory.
Create a shared directory /home/admins, make it has the following characteristics:
/home/admins belongs to group adminuser
This directory can be read and written by members of group adminuser Any files created in /home/ admin, group automatically set as adminuser.
Answer:
Explanation:
mkdir /home/admins
chgrp -R adminuser /home/admins
chmodg+w /home/admins
chmodg+s /home/admins
NEW QUESTION # 22
We are working on /data initially the size is 2GB. The /dev/test0/lvtestvolume is mount on /data. Now you required more space on /data but you already added all disks belong to physical volume. You saw that you have unallocated space around 5 GB on your harddisk. Increase the size of lvtestvolume by 5GB.
Answer:
Explanation:
see explanation below.
* Create a partition having size 5 GB and change the syste id '8e'.
* use partprobe command
* pvcreate /dev/hda9 Suppose your partition number is hda9.
* vgextend test0 /dev/hda9 vgextend command add the physical disk on volume group.
* lvextend -L+5120M /dev/test0/lvtestvolume
* verify using lvdisplay /dev/test0/lvtestvolume.
NEW QUESTION # 23
Configure autofs to make sure after login successfully, it has the home directory autofs, which is shared as
/rhome/ldapuser40 at the ip: 172.24.40.10. and it also requires that, other ldap users can use the home directory normally.
Answer:
Explanation:
see explanation below.
Explanation
# chkconfig autofs on
# cd /etc/
# vim /etc/auto.master
/rhome /etc/auto.ldap
# cp auto.misc auto.ldap
# vim auto.ladp
ldapuser40 -rw,soft,intr 172.24.40.10:/rhome/ldapuser40
* -rw,soft,intr 172.16.40.10:/rhome/&
# service autofs stop
# server autofs start
# showmount -e 172.24.40.10
# su - ladpuser40
NEW QUESTION # 24
Part 1 (on Node1 Server)
Task 8 [Managing Local Users and Groups]
Create a user fred with a user ID 3945. Give the password as iamredhatman
Answer:
Explanation:
* [root@node1 ~]# useradd -u 3945 fred
[root@node1 ~]# echo "iamredhatman" | passwd --stdin fred
Changing password for user fred.
passwd: all authentication tokens updated successfully
NEW QUESTION # 25
Change the logical volume capacity named vo from 190M to 300M. and the size of the floating range should set between 280 and 320. (This logical volume has been mounted in advance.)
Answer:
Explanation:
Answer see in the explanation.
Explanation/Reference:
# vgdisplay
(Check the capacity of vg, if the capacity is not enough, need to create pv , vgextend , lvextend)
# lvdisplay (Check lv)
# lvextend -L +110M /dev/vg2/lv2
# resize2fs /dev/vg2/lv2
mount -a
(Verify)
------------------------------------------------------------------------------- (Decrease lvm)
# umount /media
# fsck -f /dev/vg2/lv2
# resize2fs -f /dev/vg2/lv2 100M
# lvreduce -L 100M /dev/vg2/lv2
# mount -a
# lvdisplay (Verify)
OR
# e2fsck -f /dev/vg1/lvm02
# resize2fs -f /dev/vg1/lvm02
# mount /dev/vg1/lvm01 /mnt
# lvreduce -L 1G -n /dev/vg1/lvm02
# lvdisplay (Verify)
NEW QUESTION # 26
Search a String
Find out all the columns that contains the string seismic within /usr/share/dict/words, then copy all these columns to /root/lines.tx in original order, there is no blank line, all columns must be the accurate copy of the original columns.
Answer:
Explanation:
grep seismic /usr/share/dict/words> /root/lines.txt
NEW QUESTION # 27
Who ever creates the files/directories on archive group owner should be automatically should be the same group owner of archive.
Answer:
Explanation:
see explanation below.
Explanation
* chmod g+s /archive
* Verify using: ls -ld /archive Permission should be like:
drwxrws--- 2 root sysuser 4096 Mar 16 18:08 /archive
If SGID bit is set on directory then who every users creates the files on directory group owner automatically the owner of parent directory.
To set the SGID bit: chmod g+s directory
To Remove the SGID bit: chmod g-s directory
NEW QUESTION # 28
Install a FTP server, and request to anonymous download from /var/ftp/pub catalog. (it needs you to configure yum direct to the already existing file server.)
Answer:
Explanation:
see explanation below.
Explanation
# cd /etc/yum.repos.d
# vim local.repo
[local]
name=local.repo
baseurl=file:///mnt
enabled=1
gpgcheck=0
# yum makecache
# yum install -y vsftpd
# service vsftpd restart
# chkconfig vsftpd on
# chkconfig --list vsftpd
# vim /etc/vsftpd/vsftpd.conf
anonymous_enable=YES
NEW QUESTION # 29
Create a volume group, and set the size is 500M, the size of single PE is 16M. Create logical volume named lv0 in this volume group, set size is 20 PE, make it as ext3 file system, and mounted automatically under data.
Answer:
Explanation:
see explanation below.
Explanation
fdisk /dev/vda
pvcreate /dev/vda3
vgcreate -s 16M vg0 /dev/vda3
lvcreate -n lv0 -l 20 vg0
mkfs.ext3 /dev/mapper/vg0-lv0
mkdir /data
/etc/fstab:
/dev/mapper/vg0-lv0 /data ext3 defaults 0 0
mount -a
mount | grep data
NEW QUESTION # 30
Add admin group and set gid=600
Answer:
Explanation:
# groupadd -g 600 admin
NEW QUESTION # 31
Create the following users, groups, and group memberships:
A group named adminuser.
A user natasha who belongs to adminuser as a secondary group A user harry who also belongs to adminuser as a secondary group.
A user sarah who does not have access to an interactive shell on the system, and who is not a member of adminuser, natasha, harry, and sarah should all have the password of redhat.
Answer:
Explanation:
groupadd sysmgrs
useradd -G sysmgrs Natasha
We can verify the newly created user by cat /etc/passwd)
# useradd -G sysmgrs harry
# useradd -s /sbin/nologin sarrh
# passwd Natasha
# passwd harry
# passwd sarrah
NEW QUESTION # 32
SIMULATION
Configure autofs.
Configure the autofs automatically mount to the home directory of LDAP, as required:
server.domain11.example.com use NFS to share the home to your system. This file system contains a pre configured home directory of user ldapuserX.
Home directory of ldapuserX is:
server.domain11.example.com /home/guests/ldapuser
Home directory of ldapuserX should automatically mount to the ldapuserX of the local /home/guests Home directory's write permissions must be available for users ldapuser1's password is password
Answer:
Explanation:
See explanation below.
Explanation/Reference:
Explanation: yum install -y autofs
mkdir /home/rehome
/etc/auto.master
/home/rehome/etc/auto.ldap
Keep then exit
cp /etc/auto.misc /etc/auto.ldap
/etc/auto.ldap
ldapuserX -fstype=nfs,rw server.domain11.example.com:/home/guests/
Keep then exit
systemctl start autofs
systemctl enable autofs
su - ldapuserX// test
If the above solutions cannot create files or the command prompt is -bash-4.2$, it maybe exist multi-level directory, this needs to change the server.domain11.example.com:/home/guests/ to server.domain11.example.com:/home/guests/ldapuserX. What is multi-level directory? It means there is a directory of ldapuserX under the /home/guests/ldapuserX in the questions. This directory is the real directory.
NEW QUESTION # 33
SIMULATION
Configure iptables, there are two domains in the network, the address of local domain is 172.24.0.0/16 other domain is 172.25.0.0/16, now refuse domain 172.25.0.0/16 to access the server.
Answer:
Explanation:
See explanation below.
Explanation/Reference:
Explanation:
iptables -F
service iptables save
iptables -A INPUT -s 172.25.0.0/16 -j REJECT
service iptables save
service iptables restart
NEW QUESTION # 34
Find the files owned by harry, and copy it to catalog: /opt/dir
Answer:
Explanation:
see explanation below.
Explanation
# cd /opt/
# mkdir dir
# find / -user harry -exec cp -rfp {} /opt/dir/ \;
NEW QUESTION # 35
SIMULATION
Search files.
Find out files owned by jack, and copy them to directory /root/findresults
Answer:
Explanation:
See explanation below.
Explanation/Reference:
Explanation: mkdir/root/findfiles
find / -user jack -exec cp -a {} /root/findfiles/ \; ls /root/findresults
NEW QUESTION # 36
Configure autofs to make sure after login successfully, it has the home directory autofs, which is shared as /rhome/ldapuser40 at the ip: 172.24.40.10. and it also requires that, other ldap users can use the home directory normally.
Answer:
Explanation:
# chkconfig autofs on
# cd /etc/
# vim /etc/auto.master
/rhome /etc/auto.ldap
# cp auto.misc auto.ldap
# vim auto.ladp
ldapuser40 -rw,soft,intr 172.24.40.10:/rhome/ldapuser40
* -rw,soft,intr 172.16.40.10:/rhome/&
# service autofs stop
# server autofs start
# showmount -e 172.24.40.10
# su - ladpuser40
NEW QUESTION # 37
......
Try Free and Start Using Realistic Verified EX200 Dumps Instantly.: https://www.actual4exams.com/EX200-valid-dump.html
EX200 Actual Questions - Instant Download 136 Questions: https://drive.google.com/open?id=1YtaD75gZ8bdd6QjbEF6tJ6d_pZstezYM