Cisco 300-610 Practice Exam - 206 Unique Questions
Latest Questions 300-610 Guide to Prepare Free Practice Tests
NEW QUESTION # 84
Drag the appropriate from the left onto the current UDLD modes of operation on the right.
Answer:
Explanation:
NEW QUESTION # 85
What influences the number of ISLs that are required between Cisco MDS Series switches?
- A. N Port virtualization
- B. end-to-end oversubscription ratio
- C. type of storage
- D. FCoE protocol
Answer: B
Explanation:
Section: Storage Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/products/collateral/storage-networking/mds-9700-series-multilayer- directors/white-paper-c11-729697.html
NEW QUESTION # 86
Refer to the exhibit.
An engineer must assign multiple Fibre Channel IDs to a single port channel. Which two features must be enabled this goal? (Choose two.)
- A. SAN Pin Groups on the Cisco UCS Fabric Interconnects.
- B. Smart Zoning feature on the Cisco UCS Fabric Interconnects
- C. NPIV feature on the Cisco MDS Series
- D. NPV feature on the Cisco MDS Series.
- E. end-host mode feature on the Cisco UCS Fabric Interconnects
Answer: C,D
NEW QUESTION # 87
Drag and drop the SAN components from the left onto the correct design considerations on the right.
Answer:
Explanation:
NEW QUESTION # 88
An engineer must build a VXLAN flood-and-learn network. The customer requires the solution to be based on the IETF documented practice in RFC 7348. The solution must use broadcast, unknown unicast, and multicast (BUM) and include the efficient BUM and short BUM replication modes that use only shared trees.
Which technology meets these requirements?
- A. Bidirectional PIM
- B. PIM SSM
- C. PIM sparse mode
- D. MVPN
Answer: C
Explanation:
Reference:
flexpod_esxi70_vxlan_evpn_design.html
NEW QUESTION # 89
Drag and drop the configurations from the left onto the correct policies on the right.
Answer:
Explanation:
NEW QUESTION # 90
An engineer must integrate Layer 4 to Layer 7 services within Cisco ACI Fabric. The main requirement is to have a single point of configuration for network elements and firewall policies.
Which action meets these requirements?
- A. Deploy the firewalls in transparent mode.
- B. Define the service graph model as network policy mode.
- C. Deploy the firewalls in routed mode with PBR.
- D. Define the service graph model as service policy mode.
Answer: D
NEW QUESTION # 91
A failure occurs on the network between two BFD and OSPF neighbors. Drag and drop the protocol actions from the left into the correct order on the right.
Answer:
Explanation:
NEW QUESTION # 92
An engineer deploys LISP VM mobility. Which feature is configured on the interfaces that have VM mobility enabled?
- A. flow control
- B. proxy ARP
- C. IP redirects
- D. HSRP
Answer: B
NEW QUESTION # 93
Refer to the exhibit.
Which template is used when a vHBA template pair is created for a specific server that inherits its attributes from an existing template?
- A. Initial
- B. Updating
- C. Secondary
- D. Primary
Answer: A
NEW QUESTION # 94
Drag and drop the technologies from the left onto the correct descriptions on the right.
Answer:
Explanation:
NEW QUESTION # 95
Drag and drop the Cisco Nexus 7000 Series Switch resources from the left onto the correct groups on the right.
Answer:
Explanation:
NEW QUESTION # 96
Drag and drop the data center technologies from the left onto the correct descriptions on the right. Not all technologies are used.
Answer:
Explanation:
NEW QUESTION # 97
An ACI deployment must:
Which VRF configuration must be used?
- A. Option C
- B. Option A
- C. Option B
- D. Option D
Answer: A
NEW QUESTION # 98
A company Is using Cisco UCS and wants a network orchestration solution to meet these requirements :
centrally manage compute and storage platforms
reduce the time it takes to detect an outage
easily exchange data with TAC to reduce resolution times
The company does not have in-house knowledge about scripting. Which solution must the company choose?
- A. Cisco UCS Central
- B. Cisco Intersight
- C. Cisco DCNM
- D. Cisco HyperFlex
Answer: A
NEW QUESTION # 99
A customer requires a tool to manage Cisco network hardware. The solution must use secure communication using a secure network protocol, support the use of declarative language to manage the state of resources, and periodically pull changes to the controlled nodes. Which tool meets these requirements?
- A. Ansible
- B. SaltStack
- C. Puppet
- D. Nomir
Answer: C
NEW QUESTION # 100
An engineer is designing a data center that uses FCIP. How is QoS configured in this environment?
- A. Two separate DSCP values must be configured, one of all of the FCIP frames in the control TCP connection and another for all of the FCIP frames in the data connection.
- B. A separate DSCP value must be configured for all FCIP VSAN traffic.
- C. A separate DSCP value and priority queuing must be configured for all FCIP traffic.
- D. A separate DSCP value and CoPP must be configured for all FCIP traffic and another for all of the FCIP in the data connection.
Answer: A
Explanation:
Section: Storage Network Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/5_0/configuration/guides/ ipsvc/nxos/ipsvc/cfcip.html
NEW QUESTION # 101
Drag and drop the components from the left onto the descriptions on the right that indicate what occurs to Fibre Channel fabric when that component fails.
Answer:
Explanation:
NEW QUESTION # 102
Which two vSphere features must be included in the design of a Cisco HyperFlex systems stretched cluster?
(Choose two.)
- A. FT
- B. DRS
- C. VSS
- D. VDP
- E. HA
Answer: B,E
Explanation:
Section: Compute Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/hyperconverged_systems/ HyperFlex_HX_DataPlatformSoftware/HyperFlex_Stretched_Cluster/3_5/ b_HyperFlex_Systems_Stretched_Cluster_Guide_3_5.pdf
NEW QUESTION # 103
DRAG DROP
Drag and drop the configurations from the left onto the correct policies on the right.
Select and Place:
Answer:
Explanation:
Section: Compute Design
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-2/ b_UCSM_GUI_Configuration_Guide_2_2/ configuring_network_related_policies.html#task_7F03A03C719A4A44B8ACFAD73AADC73C
NEW QUESTION # 104
......
Cisco 300-610 certification exam is important for IT professionals because it provides validation of their ability to design, deploy and manage complex data center infrastructures. Successful completion of the certification is proof that the professional has the ability to handle the latest data center technologies and can provide effective solutions that meet the demands of business. Designing Cisco Data Center Infrastructure certification can also enhance the professional’s career by increasing opportunities for promotion and higher salaries.
To prepare for the exam, candidates can take advantage of various resources such as Cisco's official study materials, practice exams, and training courses. It is also recommended that candidates have hands-on experience with Cisco data center technologies before attempting the exam.
Correct and Up-to-date Cisco 300-610 BrainDumps: https://www.actual4exams.com/300-610-valid-dump.html
Reliable 300-610 Dumps Questions Available as Web-Based Practice Test Engine: https://drive.google.com/open?id=1pnyWL0WOLrQ59lL1MZqCckPRQ8R95LVa