[Jan 24, 2022] JN0-250 Exam Dumps PDF Guaranteed Success with Accurate & Updated Questions [Q26-Q46]

Share

[Jan 24, 2022] JN0-250 Exam Dumps PDF Guaranteed Success with Accurate & Updated Questions

Pass JN0-250 Exam - Real Test Engine PDF with 66 Questions

NEW QUESTION 26
In a standard roam from one access point to another access point, what makes the decision to roam?

  • A. the client device
  • B. the controller
  • C. the cloud
  • D. the access point

Answer: A

 

NEW QUESTION 27
You have designed a WLAN to satisfy primary coverage, secondary coverage, and capacity requirements. However, you still do not have enough BLE radios to satisfy your location requirements. You want to fill the gaps with a low cost, BLE-only device.
Which Mist device will satisfy this requirement?

  • A. BT11
  • B. AP43
  • C. AP32
  • D. AP41

Answer: A

 

NEW QUESTION 28
Which underlying technology does Mist use to calculate BLE location?

  • A. time of flight
  • B. probability surface
  • C. triangulation
  • D. trilateration

Answer: B

 

NEW QUESTION 29
Which statement is correct about 802.11 wireless network interfaces?

  • A. Wireless NICs use Carrier Sense Multiple Access Collision Detection.
  • B. A wireless NIC only receives frames destined for it.
  • C. Wireless NICs operate in full-duplex mode.
  • D. Wireless NICs process all frames that are heard.

Answer: A

 

NEW QUESTION 30
Which Mist feature offers Al-based interactive troubleshooting?

  • A. Site Configuration
  • B. Insights
  • C. Wireless Assurance
  • D. Marvis

Answer: D

 

NEW QUESTION 31
Which device is responsible for roaming decisions?

  • A. controller
  • B. AP
  • C. client
  • D. user

Answer: C

 

NEW QUESTION 32
Which Mist device is designed exclusively for Bluetooth Low Energy?

  • A. AP63
  • B. BT11
  • C. AP43
  • D. AP12

Answer: B

 

NEW QUESTION 33
Which two statements about the Mist UI are true? (Choose two.)

  • A. It can initiate a wireless packet capture.
  • B. It can initiate a wired packet capture.
  • C. It can initiate a packet capture on cloud uplink.
  • D. It can initiate a BLE packet capture.

Answer: A,B

 

NEW QUESTION 34
A customer wants to physically wire their interior automated sliding doors to Mist APs to directly control location access to certain office areas.
In this scenario, which Mist AP capability allows them to accomplish this task?

  • A. header pins
  • B. audio sensor
  • C. optical sensor
  • D. IoT interface

Answer: A

 

NEW QUESTION 35
Which statement is correct regarding settings at the organizational level?

  • A. The organizational level is where you specify customer-level global details.
  • B. The organizational level is where you specify information about each AP's placement.
  • C. The organizational level is where you enable BLE capabilities, if you have a license.
  • D. The organizational level is where you define each location's specific information.

Answer: D

 

NEW QUESTION 36
By default, which statement is correct regarding the upstream interfaces configuration on a Mixtape?

  • A. The interface is configured to use VLAN 10.
  • B. The interface is configured as a trunk port and accepts only tagged traffic.
  • C. The Interface is configured to send untagged traffic.
  • D. The Interface is configured to use VLAN 11.

Answer: B

 

NEW QUESTION 37
What is the width for a 2.4 GHz OFDM channel?

  • A. 10 MHz
  • B. 30 MHz
  • C. 5 MHz
  • D. 20 MHz

Answer: D

 

NEW QUESTION 38
Marvis requires which subscription?

  • A. Premium Analytics
  • B. Wired Assurance
  • C. Asset Visibility
  • D. Virtual Network Assistant

Answer: D

 

NEW QUESTION 39
What are two characteristics of the 2.4 GHz band when compared to the 5 GHz band? (Choose two.)

  • A. shorter wavelength
  • B. less non-Wi-Fi interference
  • C. more congestion
  • D. lower frequency

Answer: B,D

 

NEW QUESTION 40
When would be the earliest opportunity to configure an access point (AP)?

  • A. after the AP is online
  • B. after the AP is claimed to inventory
  • C. after the AP is installed
  • D. after you are on the same network as the AP

Answer: C

 

NEW QUESTION 41
Which characteristic describes Mist's cloud software architecture?

  • A. shard based
  • B. controller based
  • C. microservices based
  • D. monolithic code

Answer: C

 

NEW QUESTION 42
Which two statements are correct about Marvis? (Choose two.)

  • A. Marvis lets you ask questions about your network.
  • B. Marvis can be used as a proactive monitoring tool.
  • C. Marvis will send custom reports.
  • D. Marvis is the main configuration tool.

Answer: A,B

 

NEW QUESTION 43
What are two requirements to connect an AP to the Mist Cloud? (Choose two.)

  • A. You need a CA SSL certificate.
  • B. You need DNS resolution.
  • C. You need a DHCP server
  • D. You need a static IP address.

Answer: B,D

 

NEW QUESTION 44
What would cause reduced Wi-Fi performance?

  • A. using a single SSID
  • B. using 40 MHz channels on 5 GHz
  • C. using too many SSIDs
  • D. using a PSK

Answer: C

 

NEW QUESTION 45
Under ideal conditions, which frequency band will have the farthest usable range?

  • A. 2.4 GHz
  • B. 6 GHz
  • C. 900 MHz
  • D. 5 GHz

Answer: A

 

NEW QUESTION 46
......


Get to know about the Juniper and JN0-250 Certification Exam?

Juniper Networks is a company that has been working in the networking sector since 1984. In order to get their products to market faster, they have created several solutions for various industries. One of the most successful ones was in the area of security, which is why Juniper Networks has been the leader in developing and offering products for intrusion prevention and detection. They offer the best security devices for home users, small businesses, medium businesses, and large organizations.

The JN0-250 test is also called the Juniper Networks J exam because it covers a few topics in the Mist AI component. For those who are looking for certification in this field, this exam is one of the most important tests they need to pass. Someone could survive this, with the help of JN0-250 exam dumps. This certification test is designed to validate the candidate's mastery of Mist AI components and their configuration. It requires the candidate to pass three objectives, which are divided into five categories. The categories include Security, Networking, User Interface, Operations, and Systems. If the candidate successfully passes all the objectives within these categories, then they will get their certification in the JN0-250 exam.

 

Get New JN0-250 Certification Practice Test Questions Exam Dumps: https://www.actual4exams.com/JN0-250-valid-dump.html

Real JN0-250 Exam Dumps Questions Valid JN0-250 Dumps PDF: https://drive.google.com/open?id=1HRbHsnNXhHYEuSx9cUPpqVsFuvKVUmm5