[Oct-2021] Pass Juniper JN0-1362 Exam in First Attempt Guaranteed!
Full JN0-1362 Practice Test and 66 unique questions with explanations waiting just for you, get it now!
NEW QUESTION 37
You have a service provider customer that wants to offer services in a new market. They need to have a lower cost-of-entry broadcast network gateway.
Which product would satisfy this requirement?
- A. vSRX with the appropriate licenses
- B. vCPE with the appropriate licenses
- C. vMX with the appropriate licenses
- D. uCPE with the appropriate licenses
Answer: C
NEW QUESTION 38
Your WAN links are on a VPLS service from a single service provider. You must verify device configuration power and status in the event of a service outage.
Which two actions provide out-of-band management to your edge routers? (Choose two)
- A. Connect each Ethernet management interface to a dedicated switch with traffic routed on its own subnet on the VPLS service
- B. Connect each serial management port to a console server with a cellular Internet connection
- C. Connect each Ethernet management interface to a dedicated switch with its own WAN connection.
- D. Place management traffic on a separate VLAN on the VPLS service
Answer: B,C
Explanation:
https://www.wti.com/t-remote-console-and-power-management-for-juniper-switches-and-routers.aspx
NEW QUESTION 39
Exhibit.
Referring to the exhibit which statement is true about the connectivity between service provider A and B regarding the customer's network information?
- A. The service providers must set up MP-BGP between each other to support this inter-network routing.
- B. The service providers must set up MPLS label exchange between each other for this scenario to work.
- C. The service providers may not be aware that they are providing inter-network routing for the customer.
- D. The customer is acting as a colocation (meet-me) for an inter-network routing scenario shown in the exhibit.
Answer: A
NEW QUESTION 40
Exhibit.
You work for service provider B that wants to implement a hot potato routing policy on the network so that router C uses link C-A to reach service provider A's advertised routes and router D uses link D-B to reach Service Provider A's advertised routes Currently traffic from router C is traversing the core to exit the network on router B.
Referring to the exhibit, what are two design actions that would satisfy the requirements? (Choose two.)
- A. Configure the route reflector to send multiple copies of a route learned from different IBGP peers to its clients.
- B. Implement BGP-ORR
- C. Implement BGP-LS
- D. Configure new IBGP neighbors between routers C and A and routers D and B
Answer: A,D
NEW QUESTION 41
What are three components of a class-of-service scheduler? (Choose three.)
- A. transmit rate
- B. forwarding class
- C. delay buffer size
- D. queue priority
- E. policing rate
Answer: A,C,D
Explanation:
Junos OS schedulers allow you to define the priority, bandwidth, delay buffer size, rate control status, and RED drop profiles to be applied to a particular queue for packet transmission
NEW QUESTION 42
Exhibit.
Which routing protocol design will accomplish these goals?
- A. Configure static routes to ISP A on each router within ISP B.
- B. Redistribute the BGP routes learned from ISP A into the OSPF instance running in ISP B.
- C. Configure each router in ISP B to peer with a par of route reflectors.
- D. Enable a full mesh of IBGP sessions between the routers in ISP B.
Answer: C
NEW QUESTION 43
Click the Exhibit button
Referring to the network design shown in the exhibit, you must ensure that VPN data between Site1 and Site2 will be earned over a single end-to-end LSP.
How would you advertise PE1's loopback address to accomplish this task?
- A. over a single EBGP session (IPv4 unicast NLRI) between PE1/PE4
- B. over BGP-LU sessions between the PE1/B1. B1/B2 and B2/PE4
- C. over a single MP-IBGP session (L3VPN NLRI) between PE1/PE4
- D. over a single IBGP session (IPv4 unicast NLRI) between PE VPE4
Answer: B
NEW QUESTION 44
Your customer wants an MPLS-based L3VPN service between multiple remote locations.
Which two statements are true regarding the customer's WAN edge devices? (Choose two )
- A. They must have EBGP configured.
- B. They require IP connectivity with the PEs.
- C. They require routes for all remote sites.
- D. They must have MPLS configured.
Answer: B,C
NEW QUESTION 45
What is the minimum number of nodes in a Junos Space Fabric design?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION 46
You are designing a service provider core network As part of the design, you must ensure that the MPLS network utilizes the traffic engineering database (TED) for path selection and resiliency. You have chosen OSPF as the IGP for your design.
In this scenario which statement is correct?
- A. You must disable traffic engineering in OSPF to use the TED.
- B. OSPF cannot be used to populate the TED.
- C. OSPF populates the TED by default.
- D. You must enable traffic engineering in OSPF to populate the TED.
Answer: D
Explanation:
https://www.juniper.net/documentation/en_US/junos/topics/example/ospf-traffic-engineeringenabling.html
NEW QUESTION 47
Your customer connects to their service providers using fiber-based Ethernet connections in a shared collocation room. The customer has expressed concerns about wire tapping and man-in-the-middle attacks, and has asked for your design recommendation to minimize such attacks.
Which service addresses the customer's concern?
- A. MACsec
- B. BGPFIowSpec
- C. 802 1x
- D. 802 3ad
Answer: A
NEW QUESTION 48
Your customer requires redundant routers and wants to use VRRP for the default gateway at their Internet edge.
Which two statements are correct in this scenario? (Choose two )
- A. VRRP for IPv6 provides a much faster switchover to an alternate default router than IPv6 neighbor discovery procedures
- B. The VRRP master and backup send advertisements to each other at regular intervals.
- C. VRRP dynamically elects master and backup routers
- D. VRRP will only support two routers
Answer: B,C
NEW QUESTION 49
Your customer's enterprise is adding geographically-dispersed branch offices and requires new WAN connections. The primary design consideration for this expansion is low cost but the branches must remain secure with low latency.
Which type of Internet access model satisfies the customer's requirement in this scenario?
- A. centralized model with security at each branch
- B. distributed model with security at the hub
- C. centralized model with security at the hub
- D. distributed model with security at each branch
Answer: D
NEW QUESTION 50
Your company is considering how to add more visibility in their WAN MPLS links.
Which Juniper Networks product provides this type of traffic management?
- A. JSA Series
- B. NorthStar
- C. AppFormix
- D. Contrail
Answer: B
NEW QUESTION 51
You are designing an EVPN data center solution with VXLAN.
Which two statements are true in this scenario? (Choose two)
- A. The original MAC address is advertised to remote PEs.
- B. The original MAC address is prepended to a VXLAN VNI.
- C. The original MAC address is replaced by a VXLAN VNI.
- D. The original MAC address is encapsulated within the VXLAN frame.
Answer: A,D
NEW QUESTION 52
You have a customer that operates multiple branch offices and they want a low cost access solution.
The WAN must be secure What would satisfy their requirement?
- A. a private WAN
- B. an encrypted MPLS service
- C. an IPsec VPN using broadband connections
- D. a managed MPLS service
Answer: C
NEW QUESTION 53
You work for an organization providing hosting services for customer application VMs Traditional, your organization maintained isolation between customer workloads by assigning unique VLAN IDs to each customer network. Your organization is approaching the upper limit of 4094 VLANs available to uniquely identify customer networks You need to alleviate this limitation and provide more than 4094 unique network identifiers.
Which technology would satisfy these requirements?
- A. MP-BGP
- B. MPLS
- C. VXLAN
- D. EVPN
Answer: C
NEW QUESTION 54
MPLS services are being delivered from provider edge (PE) routers Each PE is connected to multiple customer edge (CE) routers.
What should you use on the PE to isolate customer routes?
- A. VPN routing and forwarding tables
- B. external BGP
- C. port access control lists
- D. access control lists
Answer: A
NEW QUESTION 55
You are asked to design a DDoS prevention system to help mitigate denial-of-service attacks that target your customers. The management group wants to know the effect FlowSpec may have on current network operations if it is implemented as a solution.
In this scenario which two statements are correct? (Choose two )
- A. FlowSpec can block traffic based on stateful flow information.
- B. FlowSpec can block traffic based on the source address.
- C. FlowSpec requires Jflow implementation and licensing.
- D. FlowSpec can block traffic based on the destination address.
Answer: B,D
NEW QUESTION 56
You are designing a new SDN WAN solution for a large enterprise MPLS backbone. The existing customer network has some LSPs in place that were manually provisioned. The customer requires that the solution provide for complete LSP life cycle management. You are considering the NorthStar Controller as pan of the design.
Which two LSP types would be managed in this scenario? (Choose two )
- A. PCE administered
- B. PCE delegated
- C. PCE controlled
- D. PCC administered
Answer: C,D
NEW QUESTION 57
You are creating an MPLS design proposal for a customer that requires traffic engineering features through their core MPLS network. The customer has edge routers that only support LDP signaling.
Which two features would you propose using in this scenario? (Choose two)
- A. RSVP tunneling
- B. LDP
- C. RSVP
- D. LDP tunneling
Answer: C,D
NEW QUESTION 58
Exhibit.
You are asked to design a solution that will provision a circuit from the corporate headquarters to a remote branch. The circuit must be secure, and must support IGP adjacencies. IPsec has been chosen to secure traffic across the WAN connection.
Referring to the exhibit which statement describes another requirement for this circuit to function correctly?
- A. You must implement GRE over IPsec to establish routing protocols across the circuit.
- B. You must use a service provider Layer 3 VPN to establish routing protocols across the circuit
- C. You must use a service provider Layer 2 VPN to establish routing protocols across the circuit.
- D. You must increase the MTU of the IPsec tunnel to more than 1500 bytes to allow routing updates across the circuit.
Answer: A
NEW QUESTION 59
Your customer is paying for traffic prioritization and you must ensure that all traffic from their 172.27.10.0/24 network receives top priority through your network.
Which action will satisfy this requirement?
- A. Apply a multifield classifier to the ingress interfaces.
- B. Apply a custom rewrite rule to the ingress interface.
- C. Apply a behavior aggregate classifier to the egress interface.
- D. Apply a custom scheduler map to the ingress interface.
Answer: A
Explanation:
We would need MF to match the address and set the forwarding class.
NEW QUESTION 60
Which management platform automates and simplifies the management of Juniper Networks switching, routing, and security products?
- A. Junoscope
- B. Junosphere
- C. Junos Space
- D. Juniper Secure Analytics
Answer: C
NEW QUESTION 61
Your customer wants to use NorthStar to communicate with network devices and acquire the MPLS topology.
Which protocol is recommended for this purpose?
- A. ISIS
- B. BGP-LS
- C. OSPF
- D. PIM-SSM
Answer: B
NEW QUESTION 62
......
Get Latest JN0-1362 Dumps Exam Questions in here: https://www.actual4exams.com/JN0-1362-valid-dump.html