NCM-MCI-5.20 Exam PDF [2024] Tests Free Updated Today with Correct 166 Questions
Nutanix NCM-MCI-5.20 Exam Preparation Guide and PDF Download
NEW QUESTION # 93
An administrator is monitoring the Nutanix v5.15-based AOS cluster performance logs and notices that a SQL server VM is greatly exceeding its intended maximum IOPS. The administrator has confirmed that a QoS policy was previously created for the group of VMs this server is a member of.
What are two reasons that this VM would exceed its maximum configured IOPS from the QoS Policy? (Choose two.)
- A. The VM was not created as an AFS virtual machine.
- B. The SQL Server VM has volume groups attached.
- C. It was cloned from another SQL Server VM that was a member of the QoS Policy.
- D. The VM is missing the required snapshot needed to implement the QoS Policy.
Answer: A,B
NEW QUESTION # 94
An organization is running a Nutanix Cluster based on AOS 5.10.x and VMware vSphere 6.7. Currently, the CVM network is segmented and Storage only nodes not present.
A new security project based on NSX is coming. VMware Distributed Virtual Switches are required. The administrator needs to prepare the environment for the new project.
Which step should the administrator use to initiate the project?
- A. Enable Nutanix Flow at the Prism Central Level
- B. Convert storage only nodes into vSphere nodes
- C. Manually disable CVM network Segmentation
- D. Enable Jumbo Frames to accommodate network frames
Answer: D
NEW QUESTION # 95
An administrator responsible for a VDI environment needs to investigate reports of slow logins. The administrator finds that increasing the number of vCPUs from 2 to 4 will reduce the login times. Production workloads are consuming 75% of the host CPU on the cluster. The administrator increases the vCPU count on all of the VDI VMs.
What are two impacts on the cluster? (Choose two.)
- A. Increase CPU ready%
- B. Increase memory utilization%
- C. Increase CPU utilization%
- D. Increasing CPU counts will decrease memory utilization
Answer: B,D
NEW QUESTION # 96
A new Nutanix cluster is ready for production on a remote site with no IT staff. Changes to the infrastructure will cost money and probably cause a cluster stop. The administrator needs to perform a health check on the environment that should include:
* Network connectivity checks
* Network performance status
* Storage performance status
Which tool should be used to perform this test?
- A. NCC
- B. diagnostic, py
- C. X-Ray
- D. clurator_cli
Answer: A
NEW QUESTION # 97
An administrator learns that some security settings in a cluster have been changed. The environment is out of compliance with required policies.
Which function should be used to revert any settings that have changed from the defaults and prevent further violations?
- A. Defense Information Systems Agency STIG enforcement
- B. Security Configuration Management Automation (SCMA)
- C. Advanced Intrusion Detection Environment (AIDE)
- D. Cluster Lockdown with strong password enforcement
Answer: B
NEW QUESTION # 98
An Administrator has received the following critical alert:
Node 192.168.148.172 is marked to be detached from metadata the administrator has opened a case with Nutanix and the support engineer has requested more information about the error. Which two action should the administrator take in the health check dashboard to collect the requested information? choose two
- A. Run Logbay
- B. Open A remote support tunnel
- C. Run Nutanix cluster check
- D. Create an entity chart
Answer: A,C
NEW QUESTION # 99
Refer to the exhibit.
An administrator receive the warning massages shown in the exhibit while validating cluster conversion from EXSi to AHV.
What should the administrator do to address this warning in v Center Server?
- A. Keep homogeneous adapter as active and standby
- B. Keep active adapters od different speeds as active standby
- C. Remove adapters that are active but not homogeneous.
- D. Remove the standby adapters under Teaming and Failover.
Answer: A
NEW QUESTION # 100
An administrator is creating a Protection Domain to back up multiple application environments.
Which mechanism does Nutanix use to aggregate VMs with common backup and restore objectives?
- A. Consistency Groups
- B. Availability Domains
- C. Application Pools
- D. Policy-based Backups
Answer: A
NEW QUESTION # 101
An administrator is supporting a business critical environment and deploys metro availability to achieve a zero data loss configuration. The two clusters are connected by a 1GbE connection. A new workload is going to be deployed to this cluster. This workload requires a sustained 150MB/S of write throughput and 20MB/s of read throughput.
Which change must be made to deploy the workload successfully on this cluster?
- A. The bandwidth must be increased to support this workload.
- B. Zero data loss nearsync must be used to support this workload.
- C. The replication frequency must be less than 60 minutes.
- D. The workload must be configured to read at greater than 12.5MB/S.
Answer: A
Explanation:
Reference:
NEW QUESTION # 102
Refer to the exhibit.
A Microsoft SQL 2016 deployment is shown in the exhibit. The administrator receives user reports that database queries take too long to return.
Which optimization should be made to this configuration to improve performance?
- A. Add a second SCSI controller for the Database.
- B. Configure the VM to use a PCI disk controller
- C. TempDB, and Logs disk Separate the Database. TempDB, and Logs onto their own disks
- D. Combine both of the OS and SQL Binaries disks
Answer: C
NEW QUESTION # 103
Refer to the exhibit.
An administrator logged into Prism Element, notices the following in the home dashboard, and showing the exhibit.
Which action should the administrator take next?
- A. Re-run NCC specifying data_resiliency_check
- B. Troubleshoot the zookeeper server issue
- C. Check the hardware page for disk failures
- D. Configure the fqdn for the hosts indicated
Answer: A
NEW QUESTION # 104
An administrator is managing two AHV and vSphere-Based Clusters. The administrator is able to install a Windows Guest OS from an ISO Image to VMWare VMs , but is unable to do the same activity with AHV VMs.
What should the administrator do to successfully perform this action with AHV VMs?
- A. Manag Nutanix Guest tools
- B. Change VM Setting From BIOS to UEFI
- C. Verify cluster iSCSI data Services IP
- D. Provide virtIO Drivers
Answer: D
NEW QUESTION # 105
An administrator is unable to discover a Nutanix-hosted iSCSI Block device allocated to a bare-metal host.
What is causing this issue?
- A. External client access has not been enabled for the host
- B. External Host IP address is not in FileSystem Whitelist
- C. Network segmentation has not been enabled
- D. Jumbo Frames has not been configured on the switch
Answer: B
NEW QUESTION # 106
An administrator needs to create and start five new VMs for a Data Analytics Project (OLAP). The VM Profile is as follows:
* vCPU:4
* vRAM: 64 GB
* vDisk: 1.5 TB
Each of the four nodes of the Nutanix cluster has the following:
* 24 vCPU. 20% overall usage
* 192 GB RAM, 60% overall usage
* 2xl920GBSSD
* 4x 2 TB HDD
At cluster level, there is a single RF2 container that is 30% utilized and has an extent store capacity of 13.5 TB.
Which component requires administrator attention?
- A. Physical Cores, because they are not enough to power on all of the new VMs.
- B. Storage, because the capacity is not enough to create VMs.
- C. Flash Tier because it is not enough to accommodate the workloads.
- D. Physical RAM, because it is not enough to power on all of the new VMs.
Answer: D
NEW QUESTION # 107
Refer to the exhibit.
User 1 and User 2 belong to the AAPM group
What are two descriptions of how Files perform quota management? (Choose two.)
- A. User 2 can add an 8GB file without receiving a notification email.
- B. User 2 can continue to add another 3GB file but will receive a daily notification email.
- C. User 1 can add an 8GB file to the share without receiving notification.
- D. User 1 can continue to add another 5GB file but will receive a daily notification email.
Answer: A,D
NEW QUESTION # 108
A guest VM is reported to have poor storage performance. It has an I/O profile of 80% read. 20% write, and the HDDs form more than 50% of the read source.
What should an administrator do to resolve this issue?
- A. Increase the OPLOG
- B. Increase the write cache
- C. Use HDDs with higher RPM
- D. Increase SSD capacity
Answer: D
NEW QUESTION # 109
An administrator is deploying several new application VMs to a Nutanix cluster. The application is very transactional with a 28/72 random, read/write ratio.
What should the administrator do?
- A. Add one large SSD to each node and enable Flash Mode for the VMs.
- B. Add one large virtual disk to each VM. and use it for all application data.
- C. Add a minimum of four virtual disks to each VM, and aggregate them on guest OS level.
- D. Add a minimum of four SSDs to each node to ensure all writes go to the SSDs.
Answer: C
NEW QUESTION # 110
For several days, an administrator notices the following alerts:
* CVM NIC Speed Low Warning Alerts
* Warning Alerts of CVM NIC not performing at optimal speed
* CVM is disconnected from the network Critical Alert
* Network Visualization page shows excessive dropped packets on CVM/Host Which steps should be taken to determine which problem should be addressed first?
- A. * Verify Host/CVM connectivity on the Network Visualization page
* Use to verify the bridge and bond configuration
* Review alerts/events page for the CVM disconnected error - B. * Access the Hardware Page to verify resources are available
* Analyze ail CVM Speed Alerts in the Alerts/Events page
* Analyze output for the network and interface properties and connectivity issues - C. * Restart networking services on the CVM
* Determine the current configuration of the affected CVM via output
* Access the Alerts/Events page for the CVM network connection failures - D. * Review Alerts page for NIC speed alerts and alert timing
* Analyze the genesis.out log file for process failures
* Assess the NIC properties in the Network Visualization > Host Properties page
Answer: A
NEW QUESTION # 111
An administrator has a custom backup application that requires a 2TB disk and runs in Windows. Throughput is considerably lower than expected.
The application was installed on a VM with the following configuration:
* Four vCPUs with one core/vCPU
* 4GB of Memory
* One 50GB vDisk for the Windows installation
* One 2TB vDisk for the application
What is the recommended configuration change to improve throughput?
- A. Span the 2TB disk across four vDisks
- B. Increase the vCPUs assigned to the VM
- C. Add 4GB of memory to the VM
- D. Increase the number of cores per vCPU
Answer: A
NEW QUESTION # 112
Which Nutanix Product Provide S3-Compatible Storage?
- A. Volumes
- B. Files
- C. Objects
- D. Mine
Answer: C
NEW QUESTION # 113
A New Project is Being rolled out to an AHV Cluster being monitored by prism Central , The Application team indicated that the application managed by the project is very memory intensive . The administrator wants to be notified about any memory constraints should they occur.
How would an administrator most effectively achieve this task?
- A. Create a new alert policy for the memory Usage and set to critical after 80%.
- B. Create a Report to tracking the memory Usage
- C. Search for the VM , then in the details page , go to metrics an select CPU usage.
- D. Create a new metric chart for the cluster and analyse hypervisor Memory Usage
Answer: A
NEW QUESTION # 114
Which command should an administrator run from the CLI to view the uplink state of all AHV nodes in the cluster?
- A. manage_ovs show_uplinks
- B. allssh show_uplinks
- C. manage ovs show uplinks
- D. allssh manage_ovs show_uplinks
Answer: D
NEW QUESTION # 115
An administrator inherits a new Nutanix environment and logs in to a CVM to check the network configuration. The configuration is as follows:
Which action should the administrator take to improve network performance?
- A. Configure VLAN tagging both on br0 and br1 and their physical interfaces.
- B. Add eth0 and eth1 to the br0-up bond
- C. Configure balance-sib or balance-tcp mode for br0-up if switch configuration allows
- D. Remove one 10 Gbs interface from br0-up to make sure all 10 Gbs can be used.
Answer: C
NEW QUESTION # 116
......
Verified & Correct NCM-MCI-5.20 Practice Test Reliable Source Jan 02, 2024 Updated: https://www.actual4exams.com/NCM-MCI-5.20-valid-dump.html