[Nov-2021] NACE NACE-CIP2-001 Test Engine PDF - All Free Dumps from Actual4Exams
Get New NACE-CIP2-001 Certification – Valid Exam Dumps Questions
NEW QUESTION 39
Which standards are generally established by private-sector bodies and are available for use by any person or Organization, private or government?
- A. Voluntary
- B. De facto
- C. Mandatory
- D. Consensus
Answer: A
NEW QUESTION 40
The Concrete Repair Institute's comparators can be used to assess:
- A. Surface profile prior to coating
- B. Contamination levels prior to coating
- C. Compressive and tensile strength prior to coating
- D. Surface cleanliness prior to coating
Answer: A
NEW QUESTION 41
When conducting inspections the Inspector should follow which standards:
- A. NACE and SSPC standards in North America
- B. Australian standards in Australia
- C. The specified standards
- D. ISO standards in Europe and Asia
Answer: C
NEW QUESTION 42
Which type of pipelines collect the gas from the transmission system so utility companies can distribute the gas to end users?
- A. Gathering
- B. Transmission
- C. Midstream
- D. Distribution
Answer: D
NEW QUESTION 43
The standards defining surface cleanliness achieved by centrifugal blast cleaning are:
- A. Slightly different to air blast cleaning
- B. The same as air blast cleaning
- C. Different than air blast cleaning
- D. Comparable to air blast cleaning
Answer: B
NEW QUESTION 44
The HATE adhesion tester uses
- A. mechanical means only to apply pressure to the test dolly.
- B. compressed air to apply pressure to the test dolly.
- C. a hydraulic piston to apply pressure to the test dolly.
- D. a special tape to apply pressure to the test dolly.
Answer: C
NEW QUESTION 45
Coating application to concrete substrates is:
- A. Not required as Concrete is inorganic
- B. The same as coating steel
- C. More challenging than coating steel
- D. Less challenging, than coating steel
Answer: C
NEW QUESTION 46
You can use magnifiers to examine all of the following EXCEPT
- A. Blisters
- B. Surface cleanliness
- C. Mill scale
- D. Surface profile
Answer: B
NEW QUESTION 47
Inspectors perform tests on linings that they may not perform on exterior coatings because
- A. linings protect the contents and the container.
- B. linings are more durable than coatings.
- C. coatings are expected to degrade over time.
- D. coatings are more durable than linings.
Answer: A
NEW QUESTION 48
Surface preparation methods for Non-ferrous metals are:
- A. The same for all Non-FetT0us metals
- B. Specific for each type of Non-ferrous metal
- C. Not required
- D. The same as for Ferrous metals
Answer: B
NEW QUESTION 49
The number of air turns in an enclosure can be affected by all of these EXCEPT
- A. manufacturer of the equipment.
- B. time of the year (winter/summer).
- C. type of dehumidification equipment (refrigerant or desiccant).
- D. coating type.
Answer: D
NEW QUESTION 50
You are working as the only in-house NACE Level 2 Inspector in a shop setting when an independent 3 rd party NACE Level 3 Inspector, representing the owner, presents you with a copy of a Non Conformance Report (NCR) he has written for a NACE2/SSPC SP 10 centrifugal blast which you had previously approved.
Your FIRST preferred course of action is to:
- A. Consult your supervisor
- B. Request a re-blast of the item in question
- C. Verbally challenge the NCR
- D. Review the NCR with the other Inspector
Answer: A
NEW QUESTION 51
External coatings applied to buried pipelines are generally tested for:
- A. Cathodic disbondment
- B. Chalking resistance
- C. Solvent resistance
- D. Gloss level
Answer: A
NEW QUESTION 52
All of these are advantages of using repair patches EXCEPT
- A. special tools or equipment are required.
- B. barrier to moisture and corrosion.
- C. excellent abrasion resistance.
- D. inert to common acids, alkalis, and solvents.
Answer: A
NEW QUESTION 53
Antifouling coatings are regulated by international treaties.
- A. True
- B. False
Answer: A
NEW QUESTION 54
You are the NACY Coating Inspector on a tank lining project where desiccant dehumidification is being used. Since the first shift of abrasive blasting your readings have indicated relative humidity below 40%; however on the second shift of coating application your readings are indicting 80%.
Your FIRST preferred course of action is to:
- A. Document the readings at the end of the shift
- B. Advise the coating applicator supervisor of your readings
- C. Check to See if the dehumidification equipment is operating correctly
- D. Call your supervisor
Answer: B
NEW QUESTION 55
Which product, when closely inspected has a green or red layer of fusion bonded epoxy (FBE) that is visible directly on the steel?
- A. 3-Layer Polyethylene (PE)
- B. Coal Tar Enamel
- C. 2-Layer Polyethylene (PE)
- D. Fusion Bonded Epoxy
Answer: A
NEW QUESTION 56
Examples of non-ferrous metals include
Select All that Apply:
- A. copper
- B. mild steel.
- C. iron
- D. aluminum
Answer: A,D
NEW QUESTION 57
Which surface preparation method uses a dilute acid solution to remove laitance and I roughen the concrete surface?
- A. Sacking
- B. High-pressure water washing
- C. Acid etching
- D. Stoning
Answer: C
NEW QUESTION 58
When observing fabrication defects the NACE Inspector should:
- A. Stop the job immediately
- B. Write an NCR and call the fabricator
- C. Require they be corrected prior to coating
- D. Consult the specification to determine how they should be treated
Answer: D
NEW QUESTION 59
WJ-1 is always performed using UHWJ at pressures above 210 MPa (30,000 PSI)
- A. True
- B. False
Answer: A
NEW QUESTION 60
It is always possible to see moisture on a steel substrate:
- A. True
- B. False
Answer: B
NEW QUESTION 61
......
100% Passing Guarantee - Brilliant NACE-CIP2-001 Exam Questions PDF: https://www.actual4exams.com/NACE-CIP2-001-valid-dump.html
NACE-CIP2-001 Dumps 2021 - NewNACE Exam Questions: https://drive.google.com/open?id=13kz10WVY2CY1BKjGL_S9XVCUWWiUHsJN