Pass Your CompTIA 220-1001 Exam with Correct 752 Questions and Answers
Latest [Jul 14, 2023] 2023 Realistic Verified 220-1001 Dumps
The CompTIA A+ Certification Exam: Core 1 is a globally recognized certification that demonstrates the candidate's ability to install, configure, and maintain computer hardware and software. The certification is recognized by major technology companies such as Dell, Intel, and HP. The certification is also recognized by the United States Department of Defense, which requires all IT professionals working with the government to obtain the certification.
Career Path
The CompTIA A+ is an entry-level certification that will open doors to countless opportunities in the IT world. It gives in-depth coverage of fundamental IT concepts to help students prove themselves at the baseline level. After completing this certificate, you will get lots of opportunities to advance within the networking, security, or cloud computing niches. Thus, you can opt for the Network+ certification and advance your knowledge and skills to work with wired and wireless devices.
NEW QUESTION # 283
A user printed a report on a workgroup inkjet printer, but the pages have smeared ink on them.
Which of the following should a technician check FIRST to address this issue?
- A. if the print quality setting is set to best
- B. If the print heads are calibrated
- C. if the correct media type is selected
- D. if there is no debris in the paper path
Answer: B
NEW QUESTION # 284
A user brings in a smartphone for repair. The device is unable to send/receive calls or connect to WiFi. All applications on the device are working unless they require connectivity.
Which of the following is MOST likely causing the problem?
- A. Airplane mode
- B. VPN
- C. Disabled hot-spot
- D. Tethering
Answer: A
NEW QUESTION # 285
A customer has connected a laptop to a projector using a VGA cable. The projector is not displaying the image from the laptop. Which of the following combinations of keys will MOST likely help the customer get the laptop to projector?
- A. Alt + F key
- B. Alt + Tab
- C. Fn + F key
- D. Fn + Del
Answer: C
NEW QUESTION # 286
A user has returned to headquarters from a remote office and is unable to connect a laptop to the office wireless network. After verifying that the user's laptop is permitted to connect to the headquarters wireless network, the technician should confirm
- A. if the laptop has an APIPA address.
- B. if a check for IP conflicts is complete
- C. if proxy server settings are disabled.
- D. if airplane mode is turned off.
Answer: A
NEW QUESTION # 287
Which of the following devices is used to implement network security policies for an environment?
- A. Firewall
- B. managed switch
- C. Repeater
- D. Gateway
Answer: A
NEW QUESTION # 288
A technician is repairing a laser primer because its print jobs have a narrow, faded line running along the length of the page from top to bottom. The faded line is always in the same place Which of the following will MOST likely resolve the issue?
- A. Update the printer firmware
- B. Replace the corona wire.
- C. Replace the transfer drum
- D. Empty the excess toner bottle
Answer: B
NEW QUESTION # 289
A technician needs to run cabling from the patch panel to a new breakout box. Which of the following should the technician use to connect the cable to the jack at both the new location and the patch panel in the network wiring closet?
- A. Multimeter
- B. Wire crimper
- C. Punchdown tool
- D. Cable tester
Answer: C
NEW QUESTION # 290
Megan, the CEO, is unable to connect to the company's network on her company-issued enterprise tablet when in the office, however, it works perfectly from home. All the corporate laptops are connected to the wireless network without issue. She has asked you for assistance in getting the device online.
INSTRUCTIONS
Review the network diagrams and device configurations to determine the cause of the problem and resolve any discovered issues.
If at any time you would like to bring back the initial state of the simulation, please click the Reset All button.
Answer:
Explanation:
See the answer below:
Explanation
Click on Tablet Office 3
Click on 802.11 and Select a
Click on SSID and select CORP
At Wireless Security Mode, Click on Security Mode
Select the WPA
Megan needs to connect to the CORP SSID, using 2.4GHZ. The selected security method chose should be WPA2, and the password should be set to Corpsecure1.
NEW QUESTION # 291
A user wants to do weekly full-system backups on a laptop while minimizing the time required to perform the task. Which of the following would be BEST to use?
- A. Thunderbolt 2
- B. 802.11ac
- C. 802.3ab
- D. USB 3.1
Answer: A
NEW QUESTION # 292
A technician upgraded the memory on a server from two 8GB sticks to eight 32GB. The server memory is
now at full capacity per the user guide. When the technician powers on the system, only 128 GB of
memory is recognized by the OS and the BIOS. The technician decides to upgrade to the latest version of
the firmware on the system, which does not help. Next, the technician installs the memory in sets of 64GB
at a time. Each individual set of 64GB is fully recognized by the server.
Which of the following will not allow the server to recognize all of the memory installed at the same time?
- A. The memory has too many ECC errors and is shutting down
- B. The server needs DDR4 memory, and DDR3 is installed.
- C. The server is overheating when all of the memory is installed.
- D. The power supply is not supplying enough power for the memory.
Answer: B
NEW QUESTION # 293
Which of the following server types should be used to process outside authentication requests?
- A. Proxy
- B. DNS
- C. RADIUS
- D. Web
Answer: C
NEW QUESTION # 294
A business owner is concerned about excessive paper usage but is not concerned about the wear to the printer of the use of toner. The business owner asks a technician to find a low-cost solution.
Which of the following is the BEST action for the technician to perform?
- A. Adjust the orientation
- B. Decrease the quality
- C. Enable collating
- D. Configure duplexing
Answer: D
NEW QUESTION # 295
An organization keeps receiving spam that appears to come from its own domain. No accounts have been compromised.
Which of the following will BEST mitigate this issue?
- A. S/MIME
- B. SPF
- C. DNS
- D. SSID
Answer: A
NEW QUESTION # 296
A technician has been asked to fix a problem with a projector. The projector lamp turns off for brief periods
during a demonstration. After the technician replaced the lamp, the problem continued with an added
message that appears just before the lamp turns off. Which of the following MOST likely need to be
performed? (Choose two.)
- A. Reset the lamp life counter
- B. Change the video resolution
- C. Adjust the brightness
- D. Replace the cooling fan
- E. Install a higher lumen lamp
- F. Update the laptop video driver
Answer: A,D
NEW QUESTION # 297
A technician is configuring a student laptop, and the network administrator requires it to be statically configured. The technician successfully pings the servers by IP but cannot ping by UNC Which of the following is MOST likely the issue?
- A. DHCP
- B. DNS
- C. IP address
- D. Gateway
Answer: B
NEW QUESTION # 298
Which of the following must be configured to allow two VLANs to communicate with each other?
- A. Connection to a VPN service
- B. Valid IPv6 link local address
- C. Static IP address on a switch
- D. Common gateway device
Answer: D
NEW QUESTION # 299
The graphics department has an issue with printing certain files. The printer does not print the complete image on larger files. A technician verifies the network speed of the printer is set to 1GB and that regular text files print without issue. Which of the following is the MOST likely cause of this problem?
- A. The printer needs more RAM
- B. The printer network connection is set to half duplex
- C. The print server is timing out
- D. The users are not printing in post-script mode
Answer: A
NEW QUESTION # 300
A customer contacts the help desk stating a laptop does not remain charged for more than 30 minutes and will not charge more than 15%. Which of the following components are the MOST likely causes the issue?
(Choose three.)
- A. Backlit keyboard
- B. Processor
- C. AC adapter
- D. Battery
- E. Motherboard
- F. LCD power inverter
- G. Wireless antenna
- H. VGA card
Answer: C,D,F
NEW QUESTION # 301
The IT department recently upgrade client computer for the graphics department. A user reports the new computer has not worked since up. It , makes unusual sound when pressing the power button.
A technician verifies the power cable works and the computer is connected properly to both data and power. The monitor powers on but display the message NO source. Which of the following BEST explains the cause of this problem?
- A. There is back screen on system boot.
- B. There is insufficient power to the computer
- C. The error beep codes on POST.
- D. The computer is overheating.
Answer: D
NEW QUESTION # 302
......
For more info visit:
Get 2023 Updated Free CompTIA 220-1001 Exam Questions and Answer: https://www.actual4exams.com/220-1001-valid-dump.html
Pass 220-1001 Exam Updated 752 Questions: https://drive.google.com/open?id=1H-q-eLGlf7YzWfsLDj_XnaFmHytzfDM7