Provide API API-570 Dumps Updated Jan 23, 2024 With 150 QA's
Latest API-570 Dumps for Success in Actual API Certified
API 570 is a certification exam designed to test the proficiency of a piping inspector. The American Petroleum Institute (API) created the exam to ensure that individuals who are responsible for inspecting piping systems in the petroleum, petrochemical, and chemical industries have the necessary knowledge and skills to carry out their duties effectively. Piping Inspector certification exam is intended to evaluate an inspector's understanding of various topics, including piping inspection techniques, corrosion mechanisms, and codes and standards.
API-570 is an exam that is designed to test the knowledge and skills of professional piping inspectors. API-570 exam is conducted by the American Petroleum Institute (API) which is a trade association that represents the oil and natural gas industry in the United States. The API-570 exam is a certification that is highly valued in the industry and is recognized globally.
NEW QUESTION # 66
provides general requirements and detailed assessment procedures for specific types of degradation that are referenced in API 570.
- A. API 653
- B. ASME 816.5
- C. API 598
- D. API RP 579
Answer: D
NEW QUESTION # 67
all suspect areas and areas of damaged insulation should be examined?
- A. 10%
- B. 50%
- C. 33%
- D. 100%
Answer: A
NEW QUESTION # 68
Of the following examples, which one may cause a leak in a threaded joint?
- A. Changing the direction of flow in the piping system
- B. Under pressuring the part
- C. Back welding the fitting
- D. Lack of thread lubricant
Answer: D
NEW QUESTION # 69
What is the design thickness of NPS 2 ½, SA106 Gr.B pipe that operates at 25 psi / 200°F
- A. not enough information given
- B. 0.275"
- C. 0.100"
- D. 0.002"
Answer: D
NEW QUESTION # 70
In lieu of the required heat treatment after welding, what may be used as an alternative?
- A. Normalizing/annealing
- B. Air Hardening
- C. Quenching
- D. Strain Harmonics
Answer: A
NEW QUESTION # 71
Aboveground piping is subject to atmospheric corrosion.
What is buried piping subject to?
- A. Erosion
- B. Soil electrolytes
- C. Anodic reaction
- D. Soil corrosion
Answer: D
NEW QUESTION # 72
Why should a leaking threaded joint not be tightened while the system is in service?
- A. Rust or corrosion might be holding the pressure
- B. A crack in a thread root might fail
- C. The joint might be unscrewed
- D. The craftsman should not be near the threaded connection
Answer: B
NEW QUESTION # 73
An inspector is evaluating a radiograph, a light image of a "B" appears on a darker background of the radiograph, the.
- A. radiograph should not be rejected
- B. "B" is for identification of the weld
- C. radiograph shall be considered unacceptable
- D. "B" is for identification of the welder
Answer: C
NEW QUESTION # 74
Give the corresponding "P" number for SA 414 Gr.A material
- A. 0
- B. 11B
- C. 1
- D. 2
Answer: A
NEW QUESTION # 75
A DC yoke shall have a lifting power of at least
- A. 40 lbs.
- B. 8 lbs.
- C. 5 lbs.
- D. 10 lbs.
Answer: A
NEW QUESTION # 76
What is the maximum thickness measurement inspection interval for an injection point?
- A. By Class
- B. 5 years
- C. 10 years
- D. 3 years
Answer: D
NEW QUESTION # 77
The base metal is P No.1, the weld metal is A No.1, and the wall thickness is 7/8".
What is the holding time at 1100- 1200?F for heat treatment
- A. 1 hour
- B. Procedure is not required for this thickness
- C. 2 hours
- D. 3 hours
Answer: A
NEW QUESTION # 78
What is the test pressure of a metallic piping system whose design temperature is above the test temperature using the following conditions? NPS 6, SA106 Gr.B, 100 psi / 800°F
- A. Test temperature verses design temperatures are not different
- B. 450 psi
- C. 150 psi
- D. 278 psi
Answer: D
NEW QUESTION # 79
The minimum required pipe wall thickness or retirement thickness shall be based on pressure, mechanical and structural considerations using the appropriate design formulae and.
- A. CTOD stress
- B. assumption stress
- C. code allowable stress
- D. nil-weight ductility stress
Answer: C
NEW QUESTION # 80
What is the maximum Brinell hardness of base metal P-6?
- A. not specified
- B. 0
- C. 1
- D. 2
Answer: C
NEW QUESTION # 81
API 570 applies to piping systems for process fluids such as:
- A. Raw, intermediate, and finished products.
- B. Firewater
- C. Piping systems on trucks, ships and barges
- D. Plumbing, sanitary sewers and storm sewers
Answer: A
NEW QUESTION # 82
The inspector shall approve all repair and alteration work at designated times, referred to as_______.
- A. hold points
- B. inspection delay points
- C. work stop points
- D. inspector's discretion
Answer: A
NEW QUESTION # 83
On the regularly furnished Class 300 raised face flange, what is the height of the raised face?
- A. 0.06"
- B. 0.25"
- C. 0.09"
- D. 0.19"
Answer: A
NEW QUESTION # 84
With respect to a Class 400, NPS 12 slip on raised face flange, whose edges of the gasket do not extend to the bolt, what is the outside diameter of the gasket?
- A. 12.75"
- B. 16.50"
- C. 15.00"
- D. 18.00"
Answer: C
NEW QUESTION # 85
What is the minimum class flange that can be used if the material is SA 351 Gr.C F8C, temperature 950?F and working pressure is 1930 psig
- A. 0
- B. 1
- C. This material can not be used at this temperature
- D. 2
Answer: B
NEW QUESTION # 86
......
Changing the Concept of API-570 Exam Preparation 2024: https://www.actual4exams.com/API-570-valid-dump.html