[Q102-Q123] Latest H35-210_V2.5 Exam with Accurate HCIA-Access V2.5 PDF Questions [Jul 18, 2021]

Share

[Jul 18, 2021] Latest H35-210_V2.5 Exam with Accurate HCIA-Access V2.5 PDF Questions

Practice To H35-210_V2.5 - Actual4Exams Remarkable Practice On your HCIA-Access V2.5 Exam

NEW QUESTION 102
Is the following description correct? The larger the return loss, the better. In general, the return loss of APC is greater than that of PC type connectors.

  • A. True
  • B. False

Answer: A

 

NEW QUESTION 103
Is the following description correct? The goal of ATM, that is, the biggest feature of ATM, is to achieve the best network resource utilization for any form of business distribution. To achieve this goal, statistical multiplexing of network resources is necessary.

  • A. True
  • B. False

Answer: A

 

NEW QUESTION 104
During the configuration of the EPON PPPoE service, what templates need to be configured to increase the MDU?

  • A. Route template
  • B. Traffic template
  • C. System parameter template
  • D. DBA template

Answer: A,D

 

NEW QUESTION 105
What remote acceptance functions can MA5600T/MA5680T provide?

  • A. PPPOE simulation test
  • B. Voice call simulation test
  • C. DHCP simulation test
  • D. BTV simulation test

Answer: A,B,C,D

 

NEW QUESTION 106
With regard to the three VLANs with different attributes (common, QinQ, and Stacking), the MA5600T uses the default tag transformation rules (that is, tag-transform is set to default) when configuring the service flow. Which one of the following descriptions is incorrect?

  • A. common vlan service flow, for the service flow without tag, the default is add, for the service flow with tag, the default is translate
  • B. The default mode of all QinQ VLAN service flows is add
  • C. None of the above
  • D. stacking vlan service flow, the default is add-double for those without tags; the default is translate-and-add for service flows with tags

Answer: C

 

NEW QUESTION 107
Which of the following symbols are used to represent all terminals in the H.248 protocol?

  • A. "*"
  • B. "root"
  • C. "-"
  • D. "$"

Answer: A

 

NEW QUESTION 108
What are the incorrect statements about Type B protection for GPON networks?

  • A. Support OLT inter-board and intra-board port combination protection pair
  • B. Switching trigger conditions: 1) branch fiber failure, 2) OLT single board failure, 3) component failure
  • C. Service configuration data only needs to be configured to the main port, no need to configure two copies
  • D. Protection based on PON port and backbone fiber

Answer: B

 

NEW QUESTION 109
MA5680T supports QinQ and VLAN stacking attributes. Which of the following VLANs supports QinQ attributes?

  • A. super vlan
  • B. Common vlan
  • C. sub vlan
  • D. smart vlan

Answer: D

 

NEW QUESTION 110
In the UA5000 system, which command can be used to view the progress during data backup and loading?

  • A. display load
  • B. display tftp
  • C. display progress
  • D. display backup

Answer: C

 

NEW QUESTION 111
Is the following description correct? The OLT supports directly copying the user message priority as the priority of forwarding messages, and also supports the local setting of the priority directly on the OLT.

  • A. True
  • B. False

Answer: A

 

NEW QUESTION 112
Which of the following statements about 802.1Q is incorrect?

  • A. 802.1Q Ethernet frame is 4 bytes more than ordinary Ethernet frame
  • B. There are only 4 VLAN priorities in the 802.1Q Ethernet frame structure
  • C. The value of TPID in the 802.1Q Ethernet frame structure is 8100
  • D. Theoretically, the value range of VLAN ID is 0~4095

Answer: B

 

NEW QUESTION 113
MA5600T/MA5680T GE/FE optical interface board H802OPGD provides Ethernet optical access function. How many GE/FE P2P accesses can be supported at most?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: C

 

NEW QUESTION 114
Is the following description correct? Set the TCONT type bound to the IPTV service of a certain ONT to Type2 and a bandwidth of 20M, then the maximum IPTV service cannot exceed 20M.

  • A. False
  • B. True

Answer: A

 

NEW QUESTION 115
Is the following description correct? In PON networks, multimode optical fibers are often used.

  • A. False
  • B. True

Answer: A

 

NEW QUESTION 116
The OLT needs to classify the service flow before performing flow scheduling. Which of the following options are usually used as the means for MA5680T to perform traffic classification?

  • A. EXP field of MPLS packet
  • B. DSCP field of IP packet
  • C. The cos field of 802.1P
  • D. Tos field of IP packet

Answer: B,C,D

 

NEW QUESTION 117
What message does the H.248 media gateway send to the MGC for registration?

  • A. Add
  • B. Notify
  • C. SVC_CHG_REQ
  • D. RSIP

Answer: C

 

NEW QUESTION 118
When MA5600T is newly launched and connected to the network management system, which of the following descriptions are correct?

  • A. Add a static route, the destination address is the network segment where the network management IP is located
  • B. The configuration of the SNMP version should be the same as the configuration on the U2000 side
  • C. The interface IP address of the MA5600T used for management must be in the same network segment as the network management IP address
  • D. The configuration of read community name and write community name is the same as that on the network management side.

Answer: A,B,D

 

NEW QUESTION 119
When configuring traffic table for MA5680T, if only CIR is configured and PIR parameters are not specified, what is the PIR value by default?

  • A. PIR=CIR
  • B. PIR=min(1.5*cir, 10240000)
  • C. PIR=min(2*cir, 10240000)
  • D. Nothing

Answer: C

 

NEW QUESTION 120
The message format of the multipoint MAC control layer is an Ethernet frame. What might be the destination MAC?

  • A. Anycast MAC
  • B. Broadcast MAC
  • C. Multicast MAC
  • D. Unicast MAC

Answer: C,D

 

NEW QUESTION 121
Is the following description correct? VPI/VCI is a global concept and must be unique under the interface.

  • A. False
  • B. True

Answer: A

 

NEW QUESTION 122
Where is the H.248 protocol used?

  • A. Between MGC and MGC
  • B. Between MG and MG
  • C. Between MG and Swich
  • D. Between MGC and MG

Answer: D

 

NEW QUESTION 123
......

Exam Questions and Answers for  H35-210_V2.5 Study Guide Questions and Answers!: https://www.actual4exams.com/H35-210_V2.5-valid-dump.html

Practice To H35-210_V2.5 - Actual4Exams Remarkable Practice On your HCIA-Access V2.5 Exam: https://drive.google.com/open?id=1TxGutwJRV_Jg2QcdzsdqRAEoyrLxg4A7