Tested Material Used To HPE0-J58 Test Engine Exam Questions in here [Jan-2023]
Penetration testers simulate HPE0-J58 exam PDF
HP HPE0-J58 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
NEW QUESTION 14
Refer to the exhibit.
A customer requests a quote tor an HPE 3PAR 9450 array. The customer will provision a single CPG using RAID 6 (6+2) arx1 require caqe availability What must De changed in the Bin of Materials shown to meet this requirement?
- A. Remove 2 HPE 3PAR 9000 2-port to GD Ethernet Host Pus Adapters.
- B. Change From Direct Connect to Daisy-chain cabling
- C. Add an additional HPE 3PAR StoreServ File Controller v3 System
- D. Add A HPE 3PAR 9000 24-disk 2U SFF (2 Sin) SAS Delve Enclosures.
Answer: A
NEW QUESTION 15
A customer asks you to design a solution to protect their existing ERP solution. The solution must allow them to achieve an RTO of ten minutes and an RPO of zero minutes. The existing ERP solution is running on an HPE 3PAR Ail Flash Array, the customer has a DR facility, hut they do not have any DR storage arrays.
in addition to installing a new array in the DR facility, which data protection should you recommend to achieve the customer goals?
- A. synchronous Remote copy
- B. Periodic Asynchronous Remote Copy
- C. Asynchronous Remote Copy
- D. Peer Persistence
Answer: A
NEW QUESTION 16
A customer needs to replicate the data on their HPE 3PAR arrays between their datacenters. Their
datacenters are 250km apart. The link between the sites has an RTO of 100 ms, and they have an RPO of 3
minutes.
Which replication method should you recommend to meet the customer needs?
- A. RCFC is Synchronous mode
- B. RCIP in Asynchronous Streaming mode
- C. RCIP is Synchronous mode
- D. RCFC in Asynchronous Periodic Mode
Answer: C
NEW QUESTION 17
Which advantage does InfoSight for HPE Storage deliver to a customer?
- A. an AI recommendation engine to predict issues and analyze root causes
- B. intelligence in the customer datacenter
- C. automatic firmware download and deployment for Nimble storage arrays
- D. online ordering of required capacity and license upgrades
Answer: A
NEW QUESTION 18
You completed the HPE Nimble storage replication partnership in a customer environment.
When you test the network connection from the primary partner to the secondary partner, the test fails; when you test the connection from the secondary to the primary partner, the test is successful.
What is the most likely cause of the failure?
- A. The primary partner name is not configured properly
- B. The test can only be performed from the secondary array
- C. The secondary partner name is not configured properly
- D. The secondary array network ports are misconfigured
Answer: C
NEW QUESTION 19
A customer needs to setup specific replication bandwidth requirements to limit the bandwidth between HPE Nimble Storage replication partners, which is different than the bandwidth requirements to another Replication Partner.
Which Bandwidth parameter should the customer use?
- A. Overall limit policy
- B. Per-partner limit
- C. Partner Maximum limit
- D. Array-to-array Limit
Answer: D
NEW QUESTION 20
A customer needs to analyze performance and capacity of their storage environment. Their environment
consists of HPE 3PAR, EMC VNX, and Pure Systems.
Which tool should you use to begin your assessment of their environment?
- A. NinjaCrawler
- B. SAF Collect
- C. DD Analyzer
- D. HPE Infosight
Answer: B
NEW QUESTION 21
You receive an error when attempting to utilize SAF Analyze to upload customer data that you have collected to develop reports for a new proposal. What must you do first to begin the process?
- A. Create a gatekeeper on your SAF utility server
- B. Export the data as .xml
- C. Create a new opportunity
- D. Create a single .zip file of all data exports
Answer: D
NEW QUESTION 22
Refer to the exhibit.
A customer is considering a new HPE 3PAR for the purpose of implementing deduplication and compression.
Based on the output returned from the NinjaCrawler tool, what do you know about the customer data?
- A. This data has a video data workload profile
- B. This data is a good candidate for HPE 3PAR deduplication
- C. This data is from an HP-UX system
- D. This data has a block size which is not optimal for HPE 3PAR
Answer: B
NEW QUESTION 23
A customer has standardized on Windows Server. They need to ensure that application and storage will move between sites as one during automated or manual failover. Which HPE 3PAR integrated solution should you recommend to the customer as a preventative measure?
- A. Site Recovery Manager
- B. Cluster Extension (CLX)
- C. Serviceguard Metrocluster
- D. Peer Persistence
Answer: B
NEW QUESTION 24
A customer has started to load their HPE 3PAR 8450 with data, but are not sure what data reduction they are achieving. They ask you to run analysis and estimate the deduplication ratio of data currently on a virtual volume (VV).
Which CLI command should you use to understand data reduction ratios?
- A. showvv
- B. checkvv
- C. convertvv
- D. tunevv
Answer: B
Explanation:
Explanation/Reference: https://manualzz.com/doc/34471724/hpe-3par-adaptive-data-reduction
NEW QUESTION 25
How does the HPE Storage strategy support the business need for intelligent storage?
- A. It matches customer workloads with the best available resources, while autonomously monitoring the storage environment for issues before they become problems
- B. It Integrates the entire storage product portfolio into a Federated Storage Array capable of hosting any customer workload.
- C. It enables customers to move workloads seamlessly between resources from all vendors, while maintaining data integrity and performance at the highest level.
- D. It reorganizes data patterns in a way that eliminates the requirement for dedicated storage arrays, freeing valuable rack space for other uses.
Answer: A
NEW QUESTION 26
A customer is expecting rapid growth of their data storage needs on their HPE Nimble arrays. Which HPE tool should you recommend to best assist with capacity planning?
- A. NinjaCrawler
- B. InfoSight
- C. NinjaStars for Nimble
- D. One Config Advanced
Answer: B
NEW QUESTION 27
A customer is interested in using HPE InfoSight Cross-stack Analytics for VMware.
Where does the customer need to make the appropriate configuration changes to makes this active?
- A. HPE InfoSight Portal
- B. HPE 3PAR SSMC
- C. VMware vCenter
- D. HPE 3PAR Service Processor
Answer: A
NEW QUESTION 28
An HPE Nimble customer needs to consolidate storage and scale performance. They are looking to purchase additional hardware to meet these requirements.
What is the best solution to offer this customer?
- A. Add additional SSDs to the cache
- B. Use multi-array storage pools
- C. Use multiple single-array storage pools
- D. Add additional HBAs in the arrays
Answer: C
NEW QUESTION 29
A customer has recently acquired another company that is located less than 3 km from their current main
location. Both locations use HPE B-Series products in their storage environment.
The customer needs to merge the 2 locations together while still using the current WAN and networking
infrastructure at both locations. They need to keep their initial cost down until they are able to redesign both networking infrastructures.
Which protocol should be incorporated when providing a proposal to meet the customer needs?
- A. CWDM
- B. FCIP
- C. ISCSI
- D. DWDM
Answer: A
NEW QUESTION 30
Which HPE 3PAR functionality allows addition of data located on non-HPE storage systems to an HPE 3PAR Storage Federation?
- A. HPE 3PAR Peer Motion
- B. HPE 3PAR Peer Persistence
- C. HPE 3PAR Online Import
- D. HPE 3PAR Remote Copy
Answer: A
NEW QUESTION 31
You are proposing a replication solution to a customer. A competitor offers a solution based on storage
virtualization appliances.
What should you stress about an HPE 3PAR replication solution in regard to the competitor's proposal?
- A. It means less overhead for management and monitoring
- B. It offers superior virtualization of 3rd party storage arrays
- C. It offers best-in-class backup and restore capabilities
- D. It will add on-the-fly encryption and compression to data being replicated outside the customer's DC
Answer: A
NEW QUESTION 32
A customer has two sites within a short distance. They require a primary storage solution which supports
automatic failover for their block storage, SMB shares, and NFS home directories. Which HPE solution best fits
the customer's requirements?
- A. HPE Nimble
- B. HPE StoreOnce
- C. HPE 3PAR
- D. HPE Simplivity
Answer: C
NEW QUESTION 33
A customer has an aging Fibre Channel SAN from one vendor and a separate iSCSI SAN from another vendor. The customer wants to upgrade to a single vendor that will allow them to manage the SAN through a single vendor management console.
Which solution should you recommend?
- A. one HPE Nimble Storage Fibre Channel Group and one HPE Nimble Storage iSCSI Group
- B. one HPE Nimble Storage Group that has a Fibre Channel port and a ISCSI pool
- C. one HPE Nimble Fibre Channel group federated to an HPE 3PAR for iSCSI
- D. one HPE Nimble iSCSI group federated to an HPE 3PAR for Fibre Channel
Answer: A
NEW QUESTION 34
Refer to the exhibit. A customer is looking to replace the backup environment shown. Which HPE Storage Tool should you use to assess their backup environment?
- A. HPE NinjaProtected+
- B. HPE Storage Sizer
- C. HPE NinjaCrawler
- D. DD Analyzer
Answer: A
NEW QUESTION 35
A customer needs to replace their outdated storage arrays.
Which resource provides the necessary information to properly size a solution?
- A. HPE Storage Sizer
- B. HPE NinjaCrawler
- C. HPE Ninja Stars for Nimble
- D. HPE Storage Assessment Foundry
Answer: D
NEW QUESTION 36
......
Authentic Best resources for HPE0-J58 Online Practice Exam: https://www.actual4exams.com/HPE0-J58-valid-dump.html
Get the superior quality HPE0-J58 Dumps with explanations waiting just for you, get it now: https://drive.google.com/open?id=1z2Iy0LaJtEno7VeI3Bs3J1gOoF0P4UQj