[Q17-Q34] Latest AD0-E718 Exam with Accurate Adobe Commerce Architect Master PDF Questions [Aug 03, 2023]

[Aug 03, 2023] Latest AD0-E718 Exam with Accurate Adobe Commerce Architect Master PDF Questions

Practice To AD0-E718 - Actual4Exams Remarkable Practice On your Adobe Commerce Architect Master Exam

NEW QUESTION # 17
An Adobe Commerce Architect needs to scope a bespoke news section for a merchant's Adobe Commerce storefront. The merchant's SEO agency requests that the following URL structure:
news/{date}/{article_url_key}l where {date} is the publication date of the article, and {article_url_key} is the URL key of the article.
The Architect scopes that a news entity type will be created. The date and URL key data will be stored against each record and autogenerated on save. The values will be able to be manually overridden.
The Architect needs to manage routing this functionality and adhere to best practice.
Which two options should the Architect consider to meet these requirements? (Choose two.)

• A. Create an observer that listens to the controllers_front_send_response_before event, looks for the mm portion of the URL, and If it matches, loads the relevant news article by matching the URL date and URL key parts.
• B. Create a plugin that intercepts lu^jentoXFraBeworkUppXActien::executed, looks for the news portion of the URL and if it matches, loads the relevant news article by matching the URL date and URL key parts.
• C. Create a custom router that runs before the standard router and matches the news portion of the URL. then looks for and loads a news article by matching the date and URL key parts of the URL.
• D. Create a standard controller route and an Index/Index index controller class that loads the relevant news article by matching the URL date and URL key parts.
• E. Create a standard controller route and mapping the internal URLs (such as news/article/view/id/1) to rewrites that are generated on save and then stored in the URL rewrites table.

Answer: C,E

Explanation:
To manage routing for the bespoke news section, the Architect should consider creating a standard controller route and mapping the internal URLs (such as news/article/view/id/1) to rewrites that are generated on save and then stored in the URL rewrites table. This will allow the news articles to have SEO-friendly URLs that match the merchant's requirements. Alternatively, the Architect should consider creating a custom router that runs before the standard router and matches the news portion of the URL, then looks for and loads a news article by matching the date and URL key parts of the URL. This will avoid using the URL rewrites table and provide more flexibility for customizing the routing logic. Option A is incorrect because it will not generate SEO-friendly URLs for the news articles. Option B is incorrect because it will not handle routing at all, but only modify the response after a controller has been executed. Option C is incorrect because it will interfere with the core action execution logic and potentially cause conflicts with other plugins. Reference: https://devdocs.magento.com/guides/v2.4/extension-dev-guide/routing.html https://devdocs.magento.com/guides/v2.4/extension-dev-guide/url-rewrite.html

NEW QUESTION # 18
An Adobe Commerce Architect runs the PHP Mess Detector from the command-line interface using the coding standard provided with Adobe Commerce. The following output appears:

The Architect looks at the class and notices that the constructor has 15 parameters. Five of these parameters are scalars configuring the behavior of Kyservice.
How should the Architect fix the code so that it complies with the coding standard rule?

• A. Modify the code of Myservice so the number of different classes, interfaces, and scalar types used as parameters in the constructor and other methods is less than 13
• B. Introduce a new class accepting those five scalars and use it in the constructor and the remaining logic of Myservice
• C. Modify the code of Myservice so that the number of different classes and interfaces referenced anywhere inside the class is less than 13

Answer: B

Explanation:
The best way to fix the code so that it complies with the coding standard rule is to introduce a new class accepting those five scalars and use it in the constructor and the remaining logic of Myservice. This will reduce the number of different classes, interfaces, and scalar types used as parameters in the constructor and other methods to less than 13, which is the limit set by the coding standard. Additionally, any extra code that is not necessary can be removed to reduce the general complexity of the class and improve readability.
The coding standard rule that is violated by the code is the Coupling Between Objects (CBO) metric. This metric measures the number of different classes and interfaces that a class depends on. A high CBO value indicates that the class is tightly coupled with other classes and interfaces, which makes it harder to maintain and test. The recommended CBO value for Adobe Commerce classes is less than 13. To reduce the CBO value of Myservice, the Architect should introduce a new class that encapsulates the five scalar parameters that configure the behavior of Myservice. This way, the constructor of Myservice will only depend on one additional class instead of five scalars, and the CBO value will be reduced by four. Reference: https://devdocs.magento.com/guides/v2.4/coding-standards/code-standard-php.html#coupling-between-objects

NEW QUESTION # 19
An Architect wants to create an Integration Test that does the following:
* Adds a product using a data fixture
* Executes $this->someLogic->execute($product) on the product
* Checks if the result is true.
Sthis->someLogic has the correct object assigned in the setup () method-Product creation and the tested logic must be executed in the context of two different store views with IDs of 3 and 4, which have been created and are available for the test.
How should the Architect meet these requirements?

• A. Create one test class with one test method. Use the \Magento\testFramework\ store\Executionstorecontext class once in the fixture and another time in the test.
• B. Create two test Classes With one test method each. Use the @magentoExecuteInStoreContext 3 and
  @magentoExecuteInStoreContext 4 annotations on the class level.
• C. Create one test class with two test methods. Use the @magentoStoreContext 3 annotation in one method and @magentoStoreContext 4 in the other one.

Answer: B

Explanation:
Explanation
The best approach for the Architect to meet the requirements is Option B. Create two test Classes With one test method each. Use the @magentoExecuteInStoreContext 3 and @magentoExecuteInStoreContext 4 annotations on the class level. This will ensure that the fixture is executed in the context of Store View 3, and the tested logic is executed in the context of Store View 4. This approach allows for more granular control of the store views and reduces the complexity of the test.

NEW QUESTION # 20
An Adobe Commerce Architect designs a data flow that contains a new product type with its own custom pricing logic to meet a merchant requirement.
Which three developments are valid when reviewing the implementation? (Choose three.)

• A. Custom type model extended from the abstract Product Type model
• B. New price model extending \Magento\Catalog\Model\Product\Type\Price
• C. A new class with custom pricing logic, extending the abstract Product model class
• D. Hydrator for attributes belonging to the new product type
• E. Content of the etc/product_types.xml file
• F. Data patch to register the new product type

Answer: A,B,E

Explanation:
Explanation
According to some tutorials45, creating a custom product type in Adobe Commerce involves several steps, such as:
* Creating a product_types.xml file in etc folder to declare the new product type
* Creating a custom type model that extends from an abstract product type model
* Creating a custom price model that extends from an abstract price model
* Creating a layout file for the new product type
* Creating a data patch to register the new product type
Based on these steps, I would say that three possible developments that are valid when reviewing the implementation are:
* A. Content of the etc/product_types.xml file
* C. Custom type model extended from the abstract Product Type model
* F. New price model extending \Magento\Catalog\Model\Product\Type\Price These developments would allow creating a new product type with its own custom pricing logic and attributes.

NEW QUESTION # 21
While reviewing a newly developed pull request that refactors multiple custom payment methods, the Architect notices multiple classes that depend on \Magento\Framework\Encryption\EncryptorInterf ace to decrypt credentials for sensitive data. The code that is commonly repeated is as follows:

In each module, the user_secret config is declared as follows:

The Architect needs to recommend an optimal solution to avoid redundant dependency and duplicate code among the methods. Which solution should the Architect recommend?

• A. Create a common config service class vendor\Payment\Gateway\config\Config under Vendor.Payment and use it as a parent class for all of the Vender \EaymentModule\Gateway\Config\Config Classes and remove $sccpeConfig and $encryptor dependencies
• B. Replace all Vendor\PaymentModule\Gateway\Config\Config Classes With virtualTyp- Of Magento\Payxer.t\Gateway\Conflg\Config and Set <user_secret backend_Model="Magento\Config\Model\Config\Backend\Encrypted" /> under ccnfig.xml
• C. Add a plugin after the getvalue method of $sccpeConfig, remove the $encryptor from dependency and use it in the plugin to decrypt the value if the config name is 'user.secret?

Answer: A

NEW QUESTION # 22
An Architect is working to implement Adobe Commerce into a pre-built ecosystem in a company.
Communication between different company domains uses event-driven design and is driven via AMQP protocol with using RabbitMQ.
The Architect needs to establish the data flow between the ERP system and Adobe Commerce.
The ERP system stores only customer data excluding customer addresses.
The role of Adobe Commerce is to provide Customer Address data to the enterprise ecosystem.
Primary Customer data should not be changed from Adobe Commerce side; it should only be updated by messages data from ERP.
Which three AMQP configurations should be considered to meet these requirements? (Choose three.)

• A. Create a queue_customer.xml and communication.xml configuration files for Customer Address messages
• B. Create a queue_topology.xml configuration file for Customer Address messages
• C. Create a nueue_publisher.xml configuration file for Customer Address messages
• D. Create a queue_consumer.xml and communction.xml configuration files for Customer data messages
• E. Create a queue_publisher.xml configuration file for Customer data messages
• F. Create a queue_topology.xml configuration file for Customer data messages

Answer: B,C,D

Explanation:
The Architect should consider three AMQP configurations to meet these requirements: A) Create a queue_consumer.xml and communication.xml configuration files for Customer data messages. These files will define the consumer and the topic for receiving customer data messages from the ERP system and updating the customer data in Adobe Commerce accordingly. B) Create a queue_publisher.xml configuration file for Customer Address messages. This file will define the publisher and the topic for sending customer address messages from Adobe Commerce to the enterprise ecosystem. C) Create a queue_topology.xml configuration file for Customer Address messages. This file will define the exchange, binding and queue for routing customer address messages to the appropriate destination. Option B is incorrect because creating a queue_publisher.xml configuration file for Customer data messages will not meet the requirement of not changing the primary customer data from Adobe Commerce side. Option E is incorrect because creating a queue_topology.xml configuration file for Customer data messages is not necessary, as Adobe Commerce only needs to consume these messages, not publish them. Option F is incorrect because creating a queue_consumer.xml and communication.xml configuration files for Customer Address messages is not necessary, as Adobe Commerce only needs to publish these messages, not consume them. Reference: https://devdocs.magento.com/guides/v2.4/extension-dev-guide/message-queues/config-mq.html

NEW QUESTION # 23
An Adobe Commerce Architect runs the PHP Mess Detector from the command-line interface using the coding standard provided with Adobe Commerce. The following output appears:

The Architect looks at the class and notices that the constructor has 15 parameters. Five of these parameters are scalars configuring the behavior of Kyservice.
How should the Architect fix the code so that it complies with the coding standard rule?

• A. Modify the code of Myserviceso the number of different classes, interfaces, and scalar types used as parameters in the constructor and other methods is less than 13
• B. Introduce a new class accepting those five scalars and use it in the constructor and the remaining logic of Myservice
• C. Modify the code of Myserviceso that the number of different classes and interfaces referenced anywhere inside the class is less than 13

Answer: B

Explanation:
Explanation
The best way to fix the code so that it complies with the coding standard rule is to introduce a new class accepting those five scalars and use it in the constructor and the remaining logic of Myservice. This will reduce the number of different classes, interfaces, and scalar types used as parameters in the constructor and other methods to less than 13, which is the limit set by the coding standard. Additionally, any extra code that is not necessary can be removed to reduce the general complexity of the class and improve readability.

NEW QUESTION # 24
An Architect needs to review a custom product feed export module that a developer created for a merchant. During final testing before the solution is deployed, the product feed output is verified as correct. All unit and integration tests for code pass.
However, once the solution is deployed to production, the product price values in the feed are incorrect for several products. The products with incorrect data are all currently part of a content staging campaign where their prices have been reduced.
What did the developer do incorrectly that caused the feed output to be incorrect for products in the content staging campaign?

• A. The developer retrieved product data directly from the database using the entity_id column rather than a collection or repository.
• B. The developer did not check for an active content staging campaign and emulates the campaign state when retrieving product data.
• C. The developer forgot to use the getContentStagingValue() method to retrieve the active campaign value of the product data

Answer: B

Explanation:
Based on the given scenario, it is likely that option C - "The developer did not check for an active content staging campaign and emulates the campaign state when retrieving product data" - is the correct answer. It appears that the developer did not take into account the active content staging campaign and did not properly adjust the product data when generating the product feed. As a result, the feed output is incorrect for products that are part of the staging campaign and have their prices reduced. The correct solution would be to check for an active content staging campaign and properly adjust the product data to reflect the campaign state.

NEW QUESTION # 25
An Adobe Commerce Architect notices that queue consumers close TCP connections too often on Adobe Commerce Cloud server leading to delays in processing messages.
The Architect needs to make sure that consumers do not terminate after processing available messages in the queue when CRON job is running these consumers.
How should the Architect meet this requirement?

• A. Change max_messages from 10,000 to 1,000 for CRON_CONSUMER_RUNNERvariable.
• B. Increase multiple_process limit to spawn more processes for each consumer.
• C. Set CONSUMER_WAIT_FOR_MAX_MESSAGES variable true in deployment stage.

Answer: C

Explanation:
Explanation
The best way to meet this requirement is to set the CONSUMERWAITFORMAXMESSAGES variable to true in the deployment stage. This variable will ensure that the consumer will not terminate when there are no more messages in the queue and will instead wait until a new message is available, preventing it from closing the connection prematurely. Additionally, the multiple_processes limit can be increased to spawn more processes for each consumer, which will help ensure that messages can be processed faster.

NEW QUESTION # 26
An Adobe Commerce Architect is working on a sales campaign to present a new product on the site that allows the purchase of a pre-defined set of products with a discount. Each product in the set should have a separate stock and tax class.
One requirement is to use a third-party system to build reports with REST API to fetch the following data:
* SKU
* Qty
* Original price
* Sales price
* Tax amount
Which solution should the Architect use to meet these requirements?

• A. * Create Grouped Product and Create after plugin on
  \Magento\GroupedProduct\Model\Product\Type\Grouped:preparedForCarrAdvanced for bunch products ordering;
  * Utilize Content Staging to manage special prices on time for the campaign for simple products;
  * Expose required data via Adobe Commerce Order API;
• B. * Create Fixed Bundle Product for gathering simple products;
  * Manage price for every selected option;
  * Add extension attribute original_simple_price for
  \Magento\Sales\Api\Data\OrderItemExtensionInterface and populate value with price of simple product;
• C. * Create Dynamic Bundle Product for gathering simple products;
  * Utilize Content Staging to manage special prices for bundle products on time for the campaign;
  * Expose required data via Adobe Commerce Order API;

Answer: C

Explanation:
Explanation
A bundle product is a customizable product that consists of several options, each based on a simple or virtual product. A grouped product is a collection of simple products that are presented as a group.
According to some tutorials , creating a bundle product in Adobe Commerce involves several steps, such as:
* Choosing the bundle product template and attribute set
* Completing the required settings, such as name, SKU, price, and weight
* Configuring the basic settings, such as status, visibility, and categories
* Adding the bundle options and associated products
* Adding optional product information, such as images and meta data
* Posting the product
Content staging is a feature that allows creating, previewing, and scheduling content updates for your store directly from the Admin . You can use content staging to create campaigns that include changes to products, categories, pages, blocks, widgets, price rules, and more.
Based on these steps and features, I would say that one possible solution that the Architect should use to meet these requirements is:
* B. Create Dynamic Bundle Product for gathering simple products; Utilize Content Staging to manage special prices for bundle products on time for the campaign; Expose required data via Adobe Commerce Order API; This solution would allow creating a new product that allows the purchase of a pre-defined set of products with a discount. Each product in the set would have a separate stock and tax class. The special prices for bundle products could be managed using content staging. The required data could be exposed via Adobe Commerce Order API.

NEW QUESTION # 27
An external system integrates functionality of a product catalog search using Adobe Commerce GraphQL API.
The Architect creates a new attribute my_attribute in the admin panel with frontend type select.
Later, the Architect sees that Productinterface already has the field my_atcribute, but returns an mc value. The Architect wants this field to be a new type that contains both option id and label.
To meet this requirement, an Adobe Commerce Architect creates a new module and file etc/schema.graphqls that declares as follows:

After calling command setup:upgrade, the introspection of Productlnterface field xy_attribute remains int.
What prevented the value type of field my_attribute from changing?

• A. The interface Productlnterface is already declared in Magento.CatalogGraphQI module. Extending requires use of the keyword -xceni before a new declaration of Productlnterface.
• B. The fields of Productlnterface are checked during processing schema.graphqls files. If they have a corresponding attribute, then the backendjype of product attribute is set for field type.
• C. The Magento.CatalogGraphQI module occurs later in sequence than the Magento.GraphQI module and merging output of dynamic attributes schema reader overrides types declared in schema.graphqls

Answer: C

Explanation:
Explanation
products query is a GraphQL query that returns information about products that match specified search criteria. It also shows how to use ProductInterface fields to retrieve product data.
https://devdocs.magento.com/guides/v2.3/graphql/queries/products.html

NEW QUESTION # 28
An Adobe Commerce Architect is asked by a merchant using B2B features to help with a configuration issue.
The Architect creates a test Company Account and wants to create Approval Rules for orders. The Approval Rules tab does not appear in the Company section in the Customer Account Menu when the Architect logs in using the Company Administrator account.
Which two steps must be taken to fix this issue? (Choose two.)

• A. Set 'Enable B2B Quote" in the B2B Admin to TRUE
• B. Set Enable Purchase Orders' on the Company Record to TRUE
• C. Set 'Enable Purchase Orders' in the B2B Admin to TRUE
• D. Merchant needs to log out of frontend and then log back in to load new permissions
• E. Make sure that the 'Purchase Order' payment method is active

Answer: B,C

Explanation:
Explanation
Enabling Purchase Orders at both the B2B Admin and the Company Record levels is necessary for Approval Rules to appear in the Company section of the Customer Account Menu. When 'Enable Purchase Orders' is set to TRUE, the system assumes that the company will be making purchases using purchase orders, and the Approval Rules tab becomes visible.

NEW QUESTION # 29
A developer needs to uninstall two custom modules as well as the database data and schemas. The developer uses the following command:
bin/magento module:uninstall Vendor_SampleMinimal Vendor_SampleModifyContent When the command is run from CLI, the developer fails to remove the database schema and data defined in the module Uninstall class.
Which three requirements should the Architect recommend be checked to troubleshoot this issue? (Choose three.)

• A. composer.json file is present and defines the module as a composer package
• B. Invoke uninstallData() and uninstallSchema () are defined in the Uninstall class
• C. invoked uninstall () method is implemented in the Uninstall class
• D. bin/magento maintenance: enable command should be run in CLI before
• E. remove-schema and --remove-data options are specified as arguments for the CLI command
• F. --remove-data option is specified as an argument for the CLI command

Answer: A,C,F

Explanation:
To troubleshoot this issue, the Architect should check three requirements:
The composer.json file is present and defines the module as a composer package. This is necessary for the module:uninstall command to work properly, as it only applies to modules installed via composer.
The --remove-data option is specified as an argument for the CLI command. This will trigger the uninstallData() method in the Uninstall class and remove any database data related to the module.
The uninstall() method is implemented in the Uninstall class. This will trigger the uninstallSchema() method and remove any database schema related to the module. Alternatively, the uninstallSchema() method can be invoked directly in the Uninstall class.

NEW QUESTION # 30
An Architect is configuring the preload.keys for Redis on an Adobe Commerce on-premise instance.
The Architect discovers that the following cache keys are loaded on each frontend request: eav_entity_types, GLOBAL_PLUGIN_LIST, DB_IS_UP_TO_DATE , SYSTEM_DEFAULT.
* The id_prefix of the frontend =>page_cache is set to 061_.
* The id_prefix of frontend => default: is not set.
* The Architect has enabled and configured Redis L2 caching.
How should the preload.keys be configured?

• A.
• B.
• C.
• D.

Answer: B

NEW QUESTION # 31
A merchant asks for a new category attribute to allow uploading an additional mobile image against categories. The merchant utilizes the content staging and preview feature in Adobe Commerce and wants to schedule and review changes to this new mobile image field.
A developer creates the attribute via a data patch and adds it to view/adminhtml/ui_component/category_form.xml. The attribute appears against the category in the main form, but does not appear in the additional form when scheduled updates are made.
To change this attribute when scheduling new category updates, which additional action should the Architect ask the developer to take?

• A. The attribute must have its apply_to field set to "staging" in the data patch file.
• B. The attribute must have<item name=''allow_staging'' xsi:type="boolean''>true<item> set in the =category_form.xml file under the attributes config" section.
• C. The attribute must also be added to view/adminhtml/ul_component/catalogstaging_category_update_form.xml.

Answer: C

Explanation:
This is because, in order to change the attribute when scheduling new category updates, the attribute must be added to the view/adminhtml/ulcomponent/catalogstagingcategoryupdateform.xml file in order to be displayed in the additional form when scheduling updates. This additional form is used to set the values for the category attributes when scheduling updates.
To change the new category attribute when scheduling new category updates, you need to add the attribute to view/adminhtml/ui_component/catalogstaging_category_update_form.xml. This file defines the form fields that appear in the Schedule New Update form for categories. By adding the attribute to this file, you will be able to schedule and review changes to the new mobile image field using the content staging and preview feature in Adobe Commerce.
Reference: https://docs.magento.com/user-guide/v2.3/cms/content-staging-category.html

NEW QUESTION # 32
An Adobe Commerce Architect is reviewing api-functional test code. Some tests send errors to indicate that the customer address does not exist.
The test codes show the following:

Which steps should the Architect take to fix the test errors?
A)

B)

C)

• A. Option A
• B. Option B
• C. Option C

Answer: B

Explanation:
The test errors are caused by using the wrong customer ID and address ID in the request. The correct customer ID and address ID should be obtained from the response of the previous request to create a customer and an address. The test code should use $this->customer->getId() and $this->address->getId() instead of hard-coded values. Reference: https://devdocs.magento.com/guides/v2.4/get-started/web-api-functional-testing.html

NEW QUESTION # 33
An Adobe Commerce store owner sets up a custom customer attribute "my.attribute" (type int).
An Architect needs to display customer-specific content on the home page to Customers with "my.attribute" greater than 3. The website is running Full Page Cache.
Using best practices, which two steps should the Architect take to implement these requirements? (Choose two.)

• A. Add a custom block and a phtml template with the content to the cmsjndexjndex.xml layout
• B. Use customer-data JS library to retrieve "my.attribute" value
• C. Add a new context value of "my.attribute" to Magento\Framework\App\Http\Context
• D. Add a dynamic block with the content to the Home Page
• E. Create a Customer Segment and use "my.attribute" in the conditions

Answer: A,B

Explanation:
Explanation
https://docs.magento.com/user-guide/v2.3/stores/attributes-customer.html displaying custom customer attributes on cached pages using best practices involves several steps, such as:
* Creating a custom block and a phtml template with the content to display
* Adding the custom block to the layout file of the page where it should appear
* Creating a section.xml file to declare a new section for the custom attribute
* Creating a plugin for Magento\Customer\CustomerData\SectionPoolInterface to add the custom attribute value to the section data
* Using customer-data JS library to retrieve and display the custom attribute value in the phtml template

NEW QUESTION # 34
......

Adobe AD0-E718 exam is intended for professionals who have experience in working with Adobe Commerce, including architects, developers, and consultants. AD0-E718 exam is also suitable for those who have experience with other e-commerce platforms and wish to enhance their knowledge and skills in Adobe Commerce.

Adobe AD0-E718 exam is a challenging test that requires candidates to have a deep understanding of Adobe Commerce and its underlying technologies. AD0-E718 exam is designed to test candidates' knowledge and skills in a variety of areas, including architecture and design, development and customization, deployment and configuration, and performance and scalability. Candidates who successfully pass the exam will be recognized as Adobe Commerce Architect Masters and will have the skills and knowledge necessary to design and develop Adobe Commerce solutions.

 

Exam Questions and Answers for AD0-E718 Study Guide Questions and Answers!: https://www.actual4exams.com/AD0-E718-valid-dump.html