[Q18-Q41] Easily To Pass New HPE6-A66 Premium Exam Updated [Dec 28, 2023]

Share

Easily To Pass New HPE6-A66 Premium Exam Updated [Dec 28, 2023]

HPE6-A66 Certification All-in-One Exam Guide Dec-2023


To prepare for the HPE6-A66 exam, individuals must have a solid understanding of networking concepts and protocols. Aruba offers a range of training courses and study materials to help individuals prepare for the exam. These include instructor-led training, self-paced eLearning courses, and study guides.

 

NEW QUESTION # 18
A company is redesigning their wireless network and will be upgrading all devices to support the latest wireless standards. The company is not near any radar installations. In order to keep wireless NIC power levels as low as possible to reduce interference issues and to take advantage of radar frequency ranges, what IEEE standard should APs support?

  • A. 802.11 ax
  • B. S02.11V
  • C. 802.11r
  • D. S02.11h

Answer: A


NEW QUESTION # 19
A company is installing Internet of Things (loT) devices to support a smart and energy-efficient environment for a building, including loT devices for heating and air conditioning, lights, and window shades. loT devices of these types are typically classified as which category of devices?

  • A. Nomadic devices
  • B. Stationary devices
  • C. Highly mobile devices (HMD)
  • D. Somewhat mobile devices (SMD)

Answer: A


NEW QUESTION # 20
A network architect has created two sites in IRIS and defined network devices for each site. From which window would a network architect connect the two sites together?

  • A. Catalog
  • B. Site-1
  • C. Start Page
  • D. Topology

Answer: B


NEW QUESTION # 21
A high-end theater venue will be implementing an Aruba wireless solution using ceiling- and wall-mounted APs. The venue wants to ensure the the APs blend into the ceiling and wall environments. What solution should the customer use to ensure that wireless coverage is not hampered?

  • A. Paint the APs to match the ceilings or walls
  • B. Place the APs above the ceiling and behind the walls
  • C. Place a strip of tape over the LEDs
  • D. Order Aruba AP covers for the APs

Answer: B


NEW QUESTION # 22
A network architect is replacing an old wireless implementation based on 802.11 a with a new wireless solution. The company has a lot of money invested in legacy wireless barcode scanners and will not be replacing them. However, the bandwidth that the company expects each AP to have less than 700 Mbps in bandwidth, and this is not expected to change in the future.
Which wireless solution would best meet this company's needs and be the most cost-effective?

  • A. 802.11ac
  • B. 802.11g
  • C. 802.11n
  • D. 802.11ax

Answer: D


NEW QUESTION # 23
A customer requires Aruba switches that support Smart Rate ports to connect to Aruba APs Which switching product should the customer purchase that will provide 24 Smart Rate ports per access layer switch'?

  • A. OfficeConnect 1950
  • B. Aruba 2930M
  • C. Aruba 2930F
  • D. Aruba 2540

Answer: B


NEW QUESTION # 24
A network architect plans to implement channel bonding in a new wireless design that involves dense deployment of APs. Which channel width would be optimal for this design?

  • A. 40 MHZ
  • B. 10MHZ
  • C. 60 MHZ
  • D. 20 MHz

Answer: C


NEW QUESTION # 25
A customer is designing a new wired network. The customer requires 50 Gbps uplinks, VSF logical switching, and smart rate port support Which of the following switches would meet these requirements?

  • A. 8300 series
  • B. 6300 series
  • C. 3810M series
  • D. 5400R series

Answer: C


NEW QUESTION # 26
A company has a warehouse that requires ruggedized APs to provide wireless access The APs need to support these characteristics:
* 2 or more spatial streams
* 802.11 ac and 802.11 n support
Cat 7 Ethernet cabling will be used to connect the APs to POE+ capable switches Link aggregation should be employed between the APs and the Ethernet switches. Which would be the most cost-effective solution that would meet the company's requirements?

  • A. AP 510 with external omnidirectional antennas and plastic AP cover
  • B. AP 365 with integrated omnidirectional antennas
  • C. AP 375 with external omnidirectional antennas
  • D. AP 318 with external omnidirectional antennas

Answer: D


NEW QUESTION # 27
Which feature does the Aruba AP 555 support? (Select two.)

  • A. three radios
  • B. desk wall plate mounted
  • C. weather proof and temperature hardened
  • D. 802.11ac and lower standards only
  • E. high density indoor locations

Answer: D,E


NEW QUESTION # 28
A company has two buildings on a campus that are approximately 700 feet (214 meters) apart with a clear line of site. No fiber exists between the buildings; however, there is a need for connecting the networks in the buildings together. The connection between the two buildings will need to support peak rates over 1 Gbps.
Which solution should the company choose that will meet their requirements as well as being cost-effective?

  • A. Two outdoor AP 367s
  • B. Two outdoor AP 510s
  • C. Two outdoor AP 387s
  • D. Multi-mode fiber between campus switches

Answer: A


NEW QUESTION # 29
Which type of Aruba AP uses its radio as its back-haul connection?

  • A. Mesh Porta
  • B. Air Monitor (AM)
  • C. Remote AP (RAP)
  • D. Mesh Point

Answer: A


NEW QUESTION # 30
Which must you perform in IRIS to assign a device to a Design Group?

  • A. Right-click the device and select Set Design Group
  • B. Drag and drop the device into the Design Group
  • C. Drag and drop the device into the Site
  • D. Right-click the device and select Set Layer Membership

Answer: B


NEW QUESTION # 31
A network architect is designing a wireless solution for a company that is leasing one floor in a multi-floor building in a downtown area. The customer is concerned about ensuring complete Wi-Fi coverage and pin-pointing RF hazards. What type of survey should the network architect perform?

  • A. Active
  • B. Virtual
  • C. Spectrum clearing
  • D. Passive

Answer: A


NEW QUESTION # 32
A company has chosen an Aruba mobility controller solution for the redesign of their wireless network The design will have two 7205 controllers in a cluster for campus employees and a single VMC-50 virtual controller for remote access via a DMZ. A Mobility Master (MM) is used for centralized license and controller management. All controllers will minimally run ArubaOS 8 4 or later Currently the company has 1.000 employees. There are 30 branch offices that will use RAPs to connect to the DMZ controller. A peak of 100 users concurrently using the VIA client will also connect to the DMZ controller.
How many Aruba LIC-VIA licenses does the company need to purchase for this solution?

  • A. 0
  • B. 1,030
  • C. 1
  • D. 2

Answer: B


NEW QUESTION # 33
A network architect wants to estimate the number of Aruba APs that will be needed Tor a new wireless design and determine the wireless coverage using VisualRF. The company requires a high-density design. The building has 200.000 square feet. How many APs should the network architect add to VisualRF in order to perform the coverage analysis?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: C


NEW QUESTION # 34
Which component uniquely defines the BSSID when implementing an employee SSID?

  • A. Radio MAC address
  • B. Case-sensitive SSID name
  • C. Wireless device MAC address
  • D. Case-insensitive SSID name

Answer: C


NEW QUESTION # 35
A network architect is redesigning the access layer in a data center for a customer. The access layer requires fixed-port switches that support VSF and data center features like L2 VXLAN and REST-API Which switching solution should the network architect recommend?

  • A. 2930F
  • B. 0
  • C. 3810M
  • D. 1

Answer: A


NEW QUESTION # 36
A company has hired a network architect to replace an existing legacy wireless and wired network The building is one-story and contains four wiring closets Based on the information the network architect gathered from the company, one 48-port POE+ switch and three 48-port non-POE+ switches will be placed in each wiring closet. One stacking domain should be created for each wiring closet that supports 40 Gbps uplinks.
Which stacking solution should the architect implement for the floor that meets the requirements and is the most cost-effective'?

  • A. Distributed trunking
  • B. VSF
  • C. VSX
  • D. Backplane stacking

Answer: C


NEW QUESTION # 37
What is the main key for a network design to ensure users have a good experience running their applications'?

  • A. Determine the number of users per location.
  • B. Implement appropriate security controls
  • C. Provide appropriate AP density.
  • D. Provision adequate bandwidth.

Answer: C


NEW QUESTION # 38
A customer placed an order for an ArubaOS 5406R switch and plans to rack mount it in a wiring closet. The dimensions of the switch are 17.5 inches wide (44.45 cm), 6.9 inches high (17.5 cm), and 17.75 inches deep (45.1 cm). How many rack units should a customer plan for this switch?

  • A. 0
  • B. 1
  • C. 2
  • D. 3

Answer: C


NEW QUESTION # 39
A network architect is redesigning a wireless network. The architect begins by analyzing the number of spatial streams supported by APs of various vendors as well as the wireless devices currently in the network, if the company wants to ensure that new wireless design, including user wireless devices, support Multi-User MIMO (MU-MIMO). which standard or standards must the wireless products support?

  • A. Only 802.11ax and 8011.ac
  • B. Only 802.11ax,802.11ac, 802.11n, and 802.11a
  • C. Only 802.11ax
  • D. Only 802.11ax,802.1lac, and 802.l1n

Answer: D


NEW QUESTION # 40
NewRocket requires a wireless capacity design 30 Aruba 510 APs will be connected to each wiring closet using SmartRate connections. Wireless coverage needs to be provided even if a POE+ switch loses power Because of security concerns, wired video cameras were recently installed throughout the facility. There are 12 of these per floor. 6 per wiring closet. The cameras are 802.11n WiFi capable and have power injectors from which to draw power.
Based on the POE+ needs of the mentioned devices, which solution would meet the POE+ requirements while still providing a redundant and cost-effective Wi-Fi solution for the devices that require POE+ for Building 1, Floor 2?

  • A. Two 2930F 24-port POE+ switches
  • B. One 3810M 40G 8 HPE Smart Rate switch
  • C. One 2930M 48-port POE+ switch
  • D. Two 2930M 24-port POE+ switches

Answer: C


NEW QUESTION # 41
......

Last HPE6-A66 practice test reviews: Practice Test HP dumps: https://www.actual4exams.com/HPE6-A66-valid-dump.html

Get Real HPE6-A66 Exam Dumps [Dec-2023] Practice Tests: https://drive.google.com/open?id=1JFC7fRCpVZrU8r6zg2nKhTNcUnDvDNA7