2024 Verified E-BW4HANA214 dumps Q&As on your SAP Certified Application Specialist Exam Questions Certain Success!
E-BW4HANA214 Exam Dumps - 100% Marks In E-BW4HANA214 Exam!
NEW QUESTION # 21
You want to load data from an SAP BW/4HANA system into another SAP BW/4HANA system using Operational Data Provisioning (ODP) of type ODP_BW.
Which objects can be used as a source? Note: There are 3 correct answers to this question.
- A. Open ODS View
- B. ABAP CDS View
- C. DataStore object (advanced)
- D. CompositeProvider
- E. InfoObject Characteristic
Answer: C,D,E
NEW QUESTION # 22
You use a customer master data table as a left table and a transactional sales data table as a right table within a graphical SAP HANA Calculation View.
You want to focus in your report on transactional data showing both: customers with sales volume and without.
Which join type should be used?
- A. Left Outer Join
- B. Referential Join
- C. Right Outer Join
- D. Full Outer Join
Answer: A
NEW QUESTION # 23
Why do you use the ' "Enhanced Master Data Update"" setting InfoObject? Note: there are 2 correct answers to this question.
- A. To enable parallel loading
- B. To enable XXL attributes
- C. To enable delta capability
- D. To enable transitive attributes
Answer: A,C
NEW QUESTION # 24
You use an Open Hub Destination to distribute SAP BW/4HANA data to a table managed by an SAP database.
Which technologies can be used? Note: There are 2 correct answers to this question.
- A. Remote Function Call (RFC)
- B. Operational Data Provisioning (ODP)
- C. Database Connection (DBCON)
- D. Smart Data Access (SDA)
Answer: C,D
NEW QUESTION # 25
What is the recommended and supported way to virtually consume data in SAP BW/4HANA based on SAP ABAP CDS View?
- A. Model a Composite Provider which consumes an SAP HANA Calculation View which refers to the SAP ABAP CDS View.
- B. Model a Composite Provide which directly consumes the SAO ABAP CDS View.
- C. Model an Open View of source type "Dattabase Table or View" which refers to the SAP ABAP CDS U View.
- D. Model an Open ODS View of source type "DataSource (BW)"which refers to the SAP ABAP CDS U View
Answer: D
NEW QUESTION # 26
A customer uses an SAP BW 7.5 system powered by SAP HANA with the SAP BW/4HANA Starter Addon.
The system mode is set to ""B4H mode"". How will the system be affected?
- A. SAP BW/4HANA Modeling Tools are needed to maintain BW Queries
- B. MultiProviders are automatically converted into Composite Providers
- C. Semantically Partitioned Objects (SPOs)can be maintainedwith the SAP BW/4HANA Modeling U Tools
- D. 3.x Data Flows can still be used if they are registered in the whitelist
Answer: A
NEW QUESTION # 27
What do the Remote Conversion approach and the Shell Conversion approach have in common? Note: There are 3 correct answers to this question.
- A. Both approaches are setup by installing required SAP notes via the SAP BW Notes Analyzer
- B. Both approaches convert unsupported object types during import into the new SAP BW/4HANA system
- C. Both approaches require the SAP BW/4HANA Starter Add-on to be installed on the sending system
- D. Both approaches result in a SAP BW/4HANAsystem which has a new system ID Notes Analyzer
- E. Both approaches uninstall the unsupported BW Add-ons from the sending BW system as the first activity
Answer: A,B,D
NEW QUESTION # 28
What is a valid data target in an SAP HANA Analysis Process without using a Data Trasfer Process?
- A. CompositeProvider
- B. InfoObject with Attributes
- C. DataStore object (advanced)
- D. SAP HANA Database Table
Answer: D
NEW QUESTION # 29
Which BW object type do you need to create a Badl Provider?
- A. CompositeProvider
- B. InfoObject
- C. DataStore object (advance) in Planning Mode
- D. DataStore object (advance) with Direct Update
Answer: B
NEW QUESTION # 30
How does column-based storage enable data to be read faster in SAP HANA?
- A. Individual columns can be processed at the same time by different CPU cores
- B. Individual columns can be transferred to an SAP HANA optimized row-based format for faster access
- C. Individual columns contain all of the information for ine record
- D. Individual columns are read-optimized by writing into a main store and a delta ^ store
Answer: B
NEW QUESTION # 31
You want to load datafrom SAP Ariba to SAP BW/4HANA. Which object in SAP BW/4HANA does SAP recommend to use for this scenario?
- A. DataStore of type ODP_CDS
- B. Write Interface-Enabled DataStore Object
- C. DataStore of type ODPJHANA
- D. Direct Update DataStore Object
Answer: B
NEW QUESTION # 32
Which objects can be used as components in a CompositeProviderin SAP BW/4HANA? Note: There are 3 correct answers to this question.
- A. BW Query
- B. SAP HANA Calculation View
- C. Open ODS View
- D. CompositeProvider
- E. SAP ABAP CDS View
Answer: B,C,D
NEW QUESTION # 33
A customer wants to know the difference between LSA and LSA++ to define a layered scalable architecture.
Which layers are only presented in LSA+ + ? Note: There are 2 correct answers to this question.
- A. Open Operational Data Store Layer
- B. Corporate Memory
- C. BW Workspace Layer
- D. EDW Propagation Layer
Answer: A,C
NEW QUESTION # 34
The SAP BW/4HANA StarterAdd-on is installed and set to the Compatibility mode. How is the SAP BW system affected? Note: There are 2 correct answers o this question.
- A. Virtual InfoProviders for Planning are still allowed.
- B. New InfoCubes can be created after getting approval by a whitelist.
- C. All objects can be changed after getting approval by a whitelist.
- D. The SAP BEx Analyzer is decommisioned.
Answer: C,D
NEW QUESTION # 35
What are key results provided by the SAP BW/4HANA Readiness Check? (3 Answers)
- A. List of all missing SAP notes for installing the SAP BW/4HANA Transfer Cockpit
- B. List of all BW/4HANA incompatible BW objects in the system
- C. List of all BW/4HANA incompatible add-ons in the system
- D. List of all BW/4HANA incompatible SAP ERP DataSource
- E. List of largest database table and additional sizing information
Answer: B,C,E
NEW QUESTION # 36
Which of the following statements describe the benefits of the SAP BW/4HANA Content Add-on? (3 Answers)
- A. The content follows the LSA++ recommendation and delivers an LSA++ aligned structure
- B. The content leverages new navigational attributes of the SAP standard time Characteristics
- C. The content delivers predefined settings for SAP BW/4HANA Data Tiering Optimization (DTO)
- D. The content delivers optimized process chain to load LSA++ structured data models
- E. The content delivers Transformations that are optimized to enable push-down to SAP HANA
Answer: A,B,E
NEW QUESTION # 37
You create an SAP HANA HDI Calculation View in SAP Web IDE for SAP HANA and have to select a data category. Which data category can only use attributes in the Semantic nodes?
- A. Cube
- B. SQL Access Only
- C. Cube with Star Join
- D. Dimension
Answer: D
NEW QUESTION # 38
You would like to implement a virtual scenario in your SAP BW/4HANA system. Which approach does SAP recommend for this kind of scenario? Note: There are 3 correct answer to this question.
- A. Generate external SAP HANA view of SAP BW/4HANA InfoProviders to consume SAP BW/4HANA data in SAP HANA
- B. Integrate external data into SAP BW/4HANA based on the Write Interface- ebabledDataStore object E, Model a CompositeProvider which combines data from multiple SAP BW/4HANA InfoProviders and SAP HANA Views
- C. Load SAP HANA data into SAP BW/4HANA InfoProviders based on the Operational Data Provisioning (ODP) framework.
- D. Define an Open ODS View which integrates an SAP HANA table into SAP BW/4HANA
Answer: A,C,D
NEW QUESTION # 39
From an SAP BW/4HANA perspective, what is the difference between SAP HANA Smart Data Access (SDA) and SAP HANA Smart Data Integration (SID)? Note: There are 2 correct answers to this question.
- A. SDA is integrates into the SAP HANA Indexserver while you need to setup an additional SAP 1-1 HANA Data Provisioning server for SDI
- B. SAP BW/4HANA Open ODS View can be modelled on SDI sources, but NOT on U SDA sources.
- C. SAP BW/4HANA DataSources of source system type "SAP HANA" can connect to SDA sources, U but NOT to SDI sources.
- D. SDI provides options for data replication in real-time, while SDA does NOT provide this capability.
Answer: A,D
NEW QUESTION # 40
You plan to virtually consume data form an ABAP CDS View in SAP BW/4HANA and decide to use an Open ODS View. Which source type does SAP recommend?
- A. Datasource (BW)
- B. Transformation
- C. Virtual table using SAP HANA Smart Data Access)
- D. Database Table View
Answer: D
NEW QUESTION # 41
Which operations can you perform in the SAP BW/4HANA Cockpit? Note: there are 3 correct answers to this question.
- A. Manage requests of DataStore objects (advanced)
- B. Create and maintain BW Query variables
- C. Create and maintain Analysis Authorizations
- D. Create and maintain indicesfor DataStore objects (advanced)
- E. Monitor Process Chains
Answer: A,C,E
NEW QUESTION # 42
......
Pass Your E-BW4HANA214 Exam Easily With 100% Exam Passing Guarantee: https://www.actual4exams.com/E-BW4HANA214-valid-dump.html
Exam Dumps Use Real SAP Certified Application Specialist Dumps With 54 Questions: https://drive.google.com/open?id=1dUxsCqDBjjvY1m7f8mlgTmU7eOv-R4OE