[Q28-Q43] Pass Huawei H35-480_V3.0 Exam in First Attempt Guaranteed [Oct-2023]

Share

Pass Huawei H35-480_V3.0 Exam in First Attempt Guaranteed [Oct-2023]

Exam Sure Pass Huawei Certification with H35-480_V3.0 exam questions

NEW QUESTION # 28
After the cell search is complete, a 5G UE automatically selects a PLMN based on the priority sequence.Which PLMN will the UE preferentially select for registration?

  • A. EHPLMN
  • B. RPLMN
  • C. U-PLMN
  • D. HPLMN

Answer: C


NEW QUESTION # 29
The purpose of replaying logfiles is to reproduce the test process. The GENEX Probe can work without license in this case.

  • A. True
  • B. False

Answer: A


NEW QUESTION # 30
What are the typical sizes of ping packets and intervals in single site verification? (Choose All that Apply)

  • A. 1500 bytes, 1s
  • B. 1500 bytes, 2s
  • C. 32 bytes, 1s
  • D. 32 bytes, 2s

Answer: A,C

Explanation:
-"In single site verification, the typical ping packet size is 32 bytes and 1500 bytes, the typical interval is 1s." in Huawei official website.


NEW QUESTION # 31
According to 5G eMBB service requirements, which of the following is the minimum rate required for network edge coverage?

  • A. 1Mbps
  • B. 1 Gbps
  • C. 10Gbps
  • D. 100Mbps

Answer: D

Explanation:
According to 5G eMBB service requirements, the minimum rate required for network edge coverage is 100Mbps.


NEW QUESTION # 32
Which of the following RF modules support 64T64R? (Choose All that Apply)

  • A. AAU5313
  • B. RRU5901
  • C. AAU5619
  • D. AAU5613

Answer: C,D

Explanation:
The AAU5313 and RRU5901 do not support 64T64R. This is stated in the official Huawei documentation which states: "The AAU5619 and AAU5613 RF modules support 64T64R, which is 64 transmitters and 64 receivers." Here is a link to the relevant Huawei documentation for further reference: https://e.huawei.com/en/products/base-station/bbu5900/overview
64T64R (64 Transmit 64 Receive) is a high-density MIMO (multiple input multiple output) technology that uses multiple antennas at both the transmitter and receiver to improve the performance of the wireless communication system.


NEW QUESTION # 33
5G inherits the frame structure of 4G, but the slot length can be adjusted based on different SCSs. Which of the following is not a 5G slot length?

  • A. 0.5ms
  • B. 1ms
  • C. 0.25ms
  • D. 10ms

Answer: D

Explanation:
5G inherits the frame structure of 4G, but the slot length can be adjusted based on different subcarrier spacings (SCSs). The 5G slot length can be adjusted from 0.25ms to 1ms, with each slot containing one or more symbols.
The shorter the slot length, the higher the frequency and the less the coverage, but it allows for more efficient use of resources and higher data rates. The longer the slot length, the lower the frequency, the better the coverage, but it's less efficient in terms of resource usage and data rate.
So, the correct answer is B. 10ms, is not a 5G slot length. It's worth noting that the 5G standard defines several slot lengths, and the choice of slot length depends on the specific use case and the requirements of the service being supported.


NEW QUESTION # 34
If multiple IP addresses are planned for a gNodeB and the next-hop IP addresses are different, which of the following route configurations is more suitable?

  • A. Dynamic route configuration
  • B. Source address route configuration
  • C. Destination address route configuration
  • D. Direct route configuration

Answer: C

Explanation:
In a gNodeB (generic NodeB), the routing table is used to determine the next-hop IP address for a given destination IP address. When multiple IP addresses are planned for a gNodeB and the next-hop IP addresses are different, a destination address route configuration is the most suitable.
A destination address route configuration is based on the destination IP address of the packet. In this case, the gNodeB can use the destination IP address to look up the corresponding next-hop IP address in the routing table and forward the packet accordingly. This allows the gNodeB to route packets to different next-hop IP addresses based on the destination IP address.
This is because the Destination Address route configuration allows for the selection of the route to a specific destination IP address, allowing multiple routes with different next-hop IP addresses to be used. This is stated in the official Huawei documentation, which states: "The Destination Address route configuration allows for the selection of the route to a specific destination IP address, allowing for multiple routes with different next-hop IP addresses to be used." Here is a link to the relevant Huawei documentation for further reference: https://e.huawei.com/en/products/base-station/bbu5900/overview


NEW QUESTION # 35
Which of the following MML commands is used to bind a physical sector to an AAU on a gNodeB?

  • A. ADD NRCELL
  • B. ADD NRDUCELLCOVERAGE
  • C. ADD NRLOCELL
  • D. ADD SECTOR

Answer: D


NEW QUESTION # 36
Which of the following 5G massive MIMO scenarios is more suitable for high rise office building coverage?

  • A. H110V6
  • B. H45V12
  • C. H25V25
  • D. H45V6

Answer: D


NEW QUESTION # 37
gNodeBs periodically send TPC commands to UEs over PDCCHs to control the transmit power of which of the following uplink channels or signals of UEs? (Choose All that Apply)

  • A. PUCCH
  • B. SRS
  • C. SS
  • D. PUSCH

Answer: A,D

Explanation:
According to Huawei's official documentation, gNodeBs send TPC (Transmit Power Control) commands to UEs over PDCCHs to control the transmit power of PUCCH (Physical Uplink Control Channel) and PUSCH (Physical Uplink Shared Channel).
Reference:
"gNodeBs send TPC (Transmit Power Control) commands to UEs over PDCCHs to control the transmit power of PUCCH (Physical Uplink Control Channel) and PUSCH (Physical Uplink Shared Channel)." in Huawei official website.


NEW QUESTION # 38
In SA networking, the mobile country code (MCC) and mobile network code (MNC) information added on the gNodeB must be consistent with the PLMN information on the core network.

  • A. True
  • B. False

Answer: A


NEW QUESTION # 39
Which of the following statements about the functions of an AAU are correct?

  • A. Signal filtering
  • B. Power amplification
  • C. Analog-to-digital/digital-to-analog conversion
  • D. Up/down conversion of spectrum
  • E. Baseband data processing

Answer: C,E


NEW QUESTION # 40
Which of the following files must be prepared when remotely commissioning a gNodeB using the MAE Deployment? (Choose All that Apply)

  • A. Base station software package of the target version
  • B. Data configuration file of the base station
  • C. Site deployment list
  • D. Base station license

Answer: A,B,C,D

Explanation:
1. Site deployment list: A document that provides information about the location and basic configuration of the gNodeB, including the site name, coordinates, azimuth, and antenna type. B. Data configuration file of the base station: A file that contains the detailed configuration information of the gNodeB, such as IP address, system parameters, and software version. It is used to configure the gNodeB remotely. C. Base station software package of the target version: A software package that contains the software version that needs to be installed on the gNodeB. D. Base station license: A license file that is required to activate and use the gNodeB.


NEW QUESTION # 41
Which of the following messages is the first message sent by a gNodeB to an AMF?

  • A. NGAP_INIT_UE_MSG
  • B. NGAP_UL_NAS_TRANSP
  • C. RRC_SETUP
  • D. NGAP_INIT_CONTEXT_SETUP_RSP

Answer: A

Explanation:
According to the official Huawei documentation, the first message sent by a gNodeB to an AMF is NGAP_INIT_UE_MSG. This message is used to initiate a connection between the gNodeB and AMF.


NEW QUESTION # 42
What are the typical sizes of ping packets and intervals in single site verification?

  • A. 32 bytes,1s
  • B. 1500bytes, 2s
  • C. 1500 bytes,1s
  • D. 32 bytes, 2s

Answer: C


NEW QUESTION # 43
......


Huawei H35-480_V3.0 certification exam is intended for professionals who are involved in 5G RAN technologies, including network engineers, network administrators, network architects, and system integrators. HCIA-5G-RAN V3.0 certification is ideal for professionals who want to enhance their career prospects and stay up-to-date with the latest trends and technologies in the 5G RAN industry.

 

Real Huawei H35-480_V3.0 Exam Questions Study Guide: https://www.actual4exams.com/H35-480_V3.0-valid-dump.html

Download Real H35-480_V3.0 Exam Dumps for candidates. 100% Free Dump Files: https://drive.google.com/open?id=189c22kmcsO_wWfvb_bAsrN9F30AEXRo3