UPDATED [2024] Pass EMC D-PST-DY-23 Exam in First Attempt Guaranteed
Pass D-PST-DY-23 Exam Latest Practice Questions
EMC D-PST-DY-23 exam is one of the most in-demand certification exams in the storage industry. Dell PowerStore is a popular storage solution that is used by many organizations worldwide. Certified professionals who have passed D-PST-DY-23 exam are in high demand for their expertise in deploying and managing Dell PowerStore solutions. They are also well-compensated for their skills and knowledge.
NEW QUESTION # 12
Which of me following is true statement?
- A. End-to-end NVMe-oF is supported with TCP only
- B. End-to-end NVMe-oF is supported with FC only
- C. PowerStore 500 is NEBS-compliant
- D. PowerStore 500 is not NEBS-compliant
Answer: C
NEW QUESTION # 13
What are the IP requirements for the management network during initial Configuration wizard for a PowerStore cluster?
- A. PowerStore T requires four IP addresses, and PowerStore X requires six IP addresses
- B. PowerStore T requires three IP addresses, and PowerStore X requires five IP addresses
- C. PowerStore T requires three IP addresses, and PowerStore X requires six IP addresses
- D. PowerStore T requires four IP addresses, and PowerStore X requires five IP addresses
Answer: A
NEW QUESTION # 14
Which two methods would a customer use to migrate their legacy block thick and thin clones to PowerStore?
(Choose two.)
- A. SAN Copy
- B. VM Import
- C. Mirrorview
- D. Agentless Import
- E. Non-disruptive Import
Answer: D,E
NEW QUESTION # 15
Which configuration item is optional during the PowerStore ICW?
- A. Management Network
- B. Default Users
- C. Support and CloudlQ
- D. Fault Tolerance
Answer: D
NEW QUESTION # 16
Which requirement of a source storage system is invalid when participating in PowerStore Native Import migration?
- A. For EqualLogic, the front-end connectivity must be iSCSI
- B. With iSCSI connectivity between source and PowerStore, Global storage IP address is not required
- C. Administrator privileges are required on the source and associated hosts to import to a PowerStore cluster
- D. For PowerMax or VMAX, the front-end connectivity must be FC
Answer: B
NEW QUESTION # 17
What is the maximum supported PowerStore volume size in TB?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION # 18
Which are the two asynchronous file-replication configuration requirements? (Choose two.)
- A. Map the File Mobility Network to Management Network
- B. Configure the File Mobility Network IP address on Management subnet and VLAN
- C. Map the File Mobility Network to Storage Network
- D. Configure the File Mobility Network IP address on Storage Network subnet and VLAN
Answer: C,D
NEW QUESTION # 19
An administrator is asked to create NVMe-vVol host in PowerStore.
Which requirement must be met to complete the task?
- A. Two appliances must be available to allow NVMe-vVol migration
- B. The host must be using the ESXi operating system
- C. Switches must support NVMe/TCP protocol
- D. NVMe-vVol must be created on internal hosts
Answer: B
NEW QUESTION # 20 
Use the simulator to assign a protection policy to the virtual machine "VM1". Use the following settings:
Snapshots on Monday through Friday at 10:00 PM Eastern Time
Retention of 10 days
When you have finished, continue to the next question.
Answer:
Explanation:
See the Explanation below for complete solution.
Explanation:
Navigate to the virtual machine management section where VMs are listed, usually under the "Compute" or
"VM" section.
Locate "VM1" from the list of virtual machines.
Access the settings or properties of "VM1".
Look for the "Protection" or "Protection Policies" section within the VM settings.
Select the option to create a new policy or assign an existing one.
In the policy settings, configure the snapshot schedule:
Set the frequency to weekly onMonday,Tuesday,Wednesday,Thursday,andFriday.
Set the time to 10:00 PM Eastern Time.
Configure the retention period for the snapshots to be 10 days.
Save the policy and ensure it is correctly associated with "VM1".
NEW QUESTION # 21
The wan connection between the production and DR sites has a low latency of <5 milliseconds.
Which firewall port is used by PowerStore to communicate between sites?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: C
NEW QUESTION # 22
Place the steps in order for configuring source and destination vCenters when setting up a vVol replication with SRM.
Answer:
Explanation:
Explanation:
NEW QUESTION # 23
A storage administrator needs to group Volume-1 and Volume-2 for consistency. The group should have a snapshot every day that is retained for 25 hours.
Use the simulator to make this configuration change.
When you have finished continue to the next question.
Answer:
Explanation:
See the steps in Explanation.
Explanation:
1. Open the simulator and log in with the default credentials: admin/Password123#.
2. SelectStorage>Volumesfrom the left menu.
3. SelectVolume-1andVolume-2from the list of volumes and clickGroup.
4. Enter a name for the volume group, such asConsistent-Group, and clickCreate.
5. SelectProtection>Protection Policiesfrom the left menu.
6. Click+ CREATEto launch the Create Protection Policy wizard.
7. Enter a name for the protection policy, such asDaily-Snapshot, and clickNext.
8. Click+ CREATEto create a new snapshot rule for the policy.
9. Enter a name for the snapshot rule, such asDaily-Rule, and clickNext.
10. SelectAll Daysfor the days to run the rule andTime of dayfor the frequency. Enter00:00as the start time and clickNext.
11. Enter25as the retention hours and clickNext.
12. Review the summary and clickFinishto create the snapshot rule.
13. ClickNextto continue the protection policy wizard.
14. Review the summary and clickFinishto create the protection policy.
15. SelectStorage>Volume Groupsfrom the left menu.
16. SelectConsistent-Groupfrom the list of volume groups and clickEdit.
17. ClickProtection Policyand selectDaily-Snapshotfrom the drop-down list. ClickSave.
18. The volume group is now configured with a protection policy that creates a snapshot every day at 00:00 and retains it for 25 hours.
NEW QUESTION # 24
An administrator removes a volume from an existing volume group which is part of replication. The system generates an error stating that it cannot create a replication session for the volume.
Why does removing the volume generate an error message?
- A. The volume is not mapped to the volume group host
- B. The volume group configuration must be synchronized
- C. The volume already has a protection policy
- D. The volume group alerts must be acknowledged
Answer: C
NEW QUESTION # 25
A storage administrator with a small budget must deploy a new scalable block-optimized storage solution requiring NVMe-oF without adding a license.
Which PowerStore configuration would meet the requirements?
- A. 500 X with no expansion enclosure
- B. 500 X with one expansion enclosure
- C. 500 T with one expansion enclosure
- D. 500 T with no expansion enclosure
Answer: D
NEW QUESTION # 26
Place the steps in the correct order to map a PowerStore volume to a NVMe host.
Answer:
Explanation:
Explanation:
NEW QUESTION # 27
When does a Protection Pokey have to be removed from PowerStore storage resource? (Choose two.)
- A. Before deleting a volume
- B. Before moving the volume to a protected volume group
- C. Before expanding volume capacity
- D. Before refreshing a Storage Resources from a Clone
Answer: A,D
NEW QUESTION # 28
......
EMC D-PST-DY-23 certification exam consists of 60 multiple-choice questions, and the duration of the exam is 90 minutes. D-PST-DY-23 exam is available in English, Japanese, and Simplified Chinese languages. D-PST-DY-23 exam fee is $230, and candidates can register for the exam through the Dell EMC Education Services website. D-PST-DY-23 exam is designed to validate the candidate's knowledge and skills in deploying Dell PowerStore solutions and is a prerequisite for other advanced-level Dell EMC certifications.
EMC D-PST-DY-23 Study Guide Archives : https://www.actual4exams.com/D-PST-DY-23-valid-dump.html
Download D-PST-DY-23 Mock Test Study Material: https://drive.google.com/open?id=1C_iBW8T7DRBqpzn4iMUWXBxyheZjGP3B