Valid CCNP Collaboration 300-810 Dumps Ensure Your Passing [Q54-Q69]

Share

Valid CCNP Collaboration 300-810 Dumps Ensure Your Passing

300-810 Dumps Real Exam Questions Test Engine Dumps Training


Difficulty in Writing Implementing Cisco Collaboration Applications (300-810) Exam

There could be many challenges participants can encounter during exam or before exam, some of the possibility could be like they haven't done preparation properly, they might have not gone through the course contents properly, might be didn't got desired date for exam because of the lack of the availability of the respective date, might be exam center which they are looking would be quite far from their place. Apart from all these challenges, when participants start writing exam, as this is computer based online exam, so sometime you may find tough in reading all the questions because exam questions could be lengthy enough which would be going on next page and you would be required to move your screen here and there. Participants may get nervous because of the complexity of the questions and confusing answers option. Challenges related to exam prepration atleast you can overcome by refering exam dumps provided by the Actual4Exams. Actual4Exams is sure about the exactness and legitimacy of 300-810 : Implementing Cisco Collaboration Applications exam dumps because it's been prepared by the Cisco Certified experts. Candidates can easily pass the 300-810 : Implementing Cisco Collaboration Applications exam with genuine 300-810 Dumps and get Cisco certification. The best source to understand the 300-810 : Implementing Cisco Collaboration Applications exam dumps well by simply pursuing examples questions and answers which is there on our website. If candidate completely practice the exam with certification 300-810 : Implementing Cisco Collaboration Applications exam dumps definitely they would able to crack this exam.

 

NEW QUESTION 54
Refer to the exhibit.

Which end-user option can resolve this issue?

  • A. Standard CTI Allow Call Monitoring
  • B. Standard CTI Allow Control of Phones Supporting Rollover Mode
  • C. Standard CTI Allow Calling Number Modification
  • D. Standard CTI Reception of SRTP Key Material

Answer: B

Explanation:
https://community.cisco.com/t5/collaboration-applications/jabber-for-windows-cannot-control-8841-desk-phone/td-p/2569503

 

NEW QUESTION 55
Refer to the exhibit.

The associated directory number is configured with Call Forward All to voicemail in Cisco UCM. When users call the directory number they hear the opening greeting. Which action should be taken to correct this issue?

  • A. Modify the rule to a Forward Routing Rule.
  • B. Modify the Calling Number to 3005.
  • C. Modify the Call Forward All to the voicemail pilot.
  • D. Modify the Dialed Number condition from "Equals" to "In".

Answer: A

 

NEW QUESTION 56
An organization has two Cisco IM and Presence clusters: one in the Americas and one in EMEAR. Both clusters connect via an intercluster peer. Each Cisco IM and Presence cluster has four nodes logically divided into two subclusters with high availability enabled with its local peers. When the Cisco IM and Presence publisher node in the Americas fails, to where are the users failed over?

  • A. Cisco IM and Presence publisher in EMEAR. in the different logical group
  • B. Cisco IM and Presence subscriber in EMEAR. in the same logical group with IM and Presence publisher
  • C. Cisco IM and Presence subscriber in the Americas, in the different logical group
  • D. Cisco IM and Presence subscriber in the Americas, in the same logical group with IM and Presence publisher

Answer: D

 

NEW QUESTION 57
Refer to the exhibit.

Which statement is true?

  • A. Each Cisco IM&P subcluster must have the same number of nodes.
  • B. If the IM&P node in sub-cluster-1 goes down, then users assigned to it are randomly split between the two remaining subclusters.
  • C. IM&P nodes in each subscluster must be configured from the same OVA template.
  • D. The administrator must add one node to each subcluster for high availability.

Answer: D

 

NEW QUESTION 58
To redirect calls from the phone extension for user A to the voicemail greeting, which call routing rule should be used in Cisco Unity Connection?

  • A. Attempt Forward forwarded routing rule
  • B. Attempt Sign-In direct routing rule
  • C. Opening Greeting direct routing rule
  • D. Opening Greeting forwarded routing rule

Answer: A

Explanation:
Reference:
https://community.cisco.com/t5/collaboration-voice-and-video/unity-connection-call-routing-logic/ta- p/3162560

 

NEW QUESTION 59
Refer to the exhibit.

A Jabber user is unable to access voicemail. During troubleshooting, an administrator captures this screenshot. What are the two ways to resolve this issue? (Choose two.)

  • A. Check if "OAuth with Refresh Login Flow" is enabled on Cisco Unity Connection but disabled in Cisco UCM.
  • B. Make sure the Jabber service profile created in Cisco UCM contains Unity Connection UC service with a voicemail server configured.
  • C. Ask an administrator to create an account for this user in Cisco Unity Connection but remove the Unity Connection UC service from the Cisco UCM Jabber service profile.
  • D. Ask the user to click on the "Connect to a device" button and use the correct username and password.
  • E. Ensure the user is not locally created on Cisco Unity Connection with a password expiring separately from the password that is used for Jabber.

Answer: B,C

 

NEW QUESTION 60
Refer to the exhibit.

An administrator is troubleshooting an issue with XMPP Federation between two. eight-node IM and Presence clusters. After looking at the logs, the administrator finds this message and must publish one or more DNS SRV records containing one or more addresses of the IM and Presence node(s). How many nodes must be selected to publish?

  • A. 0
  • B. 1
  • C. 2

Answer: C

 

NEW QUESTION 61
SAML SSO is enabled in Cisco Unified Communications Manager. What happens when a browser-based client attempts to access a protected resource on a service provider?

  • A. The browser follows the redirect and issues an HTTPS GET request to the IdP.
  • B. The IdP checks for a valid browser session.
  • C. The SAML request is maintained as a query parameter in the GET request.
  • D. The service provider generates a SAML authentication request.

Answer: D

Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/ SAML_SSO_deployment_guide/12_5_1/cucm_b_saml-sso-deployment-guide-12_5/cucm_b_saml-sso- deployment-guide-12_5_chapter_01.html

 

NEW QUESTION 62
A collaboration engineer restored a failed primary node of an active/standby IM and presence subcluster with the server Recovery manager set to defaults. The engineer notices that the user is still assigned to the secondary server. Which action resolves this issue?

  • A. Modify the DNS SRV records to point back to the primary server
  • B. Select the Fallback button under Presence Redundancy Group Configuration
  • C. Restart the services on the primary server
  • D. Wait for 30 minutes for automatic fallback to occur

Answer: D

 

NEW QUESTION 63
Refer to the exhibit.

Users report that they are prompted to accept server certificates when they initially run Cisco Jabber. An engineer removes these prompts to prevent confusion. Which statement about this scenario is true?

  • A. Nothing can be done to resolve this issue because certificates must be accepted by each Jabber user, per Cisco policy.
  • B. The behavior is a security breach because certificates are considered untrusted and as not coming from Cisco Collaboration servers.
  • C. These certificates are self-signed certificates, so they must be added manually to the user OS certificate stores.
  • D. Presentation of the certificates can be disabled by setting up Cisco IM&P servers into nonsecure mode.

Answer: C

Explanation:
Explanation/Reference: https://www.cisco.com/c/en/us/support/docs/unified-communications/jabber-windows/116637- trouble-jabber-00.html

 

NEW QUESTION 64
An engineer is configuring a Jabber client installation switch for a phone system using Cisco UCM as the registration server, with a softphone control address of 10.0.1.200. and configuration files received from 10.11.20.201 after all previous configurations are cleared. Drag and drop the snippets from the bottom of the image onto the blanks in the image to complete this configuration. Not all options are used.

Answer:

Explanation:

 

NEW QUESTION 65
Refer to the exhibit.

Users connected to the internal network report a "Cannot communicate with the server" error while trying to log in to Cisco Jabber using auto service discovery. The Jabber diagnostics and the SRV record configuration are as shown in the exhibit. The host cucm1.ccnp.cisco.com is correctly resolved by the user desktops with the Cisco Unified Communications Manager IP address. Why is the user not able to log in?

  • A. The port specified on the SRV record is wrong.
  • B. Marking weight as 0 on the SRV record makes it inactive, so Jabber cannot discover the Cisco Unified CM.
  • C. SRV protocol is not set up correctly. It should be _tls instead of _tcp.
  • D. The domain ccnp.cisco.com does not exist on the DNS server.

Answer: A

Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/Windows/9_7/CJAB_BK_C606D8A9_00_cisco-jabber-dns-configuration-guide/CJAB_BK_C606D8A9_00_cisco-jabber-dns-configuration-guide_chapter_010.html

 

NEW QUESTION 66
Refer to the exhibit.

Apple Push Notification integration is configured in a Cisco Unified IM and Presence deployment and has been working property. Administrators now report the error "Push notification settings cannot be configured.
400 Bad Request." in the GUI, and HTTP logs are displaying the errors that are shown in the exhibit. Which action solves this issue?

  • A. Fix the network connectivity to Apple iCloud.
  • B. Reboot the IM&P cluster.
  • C. Change the HTTP proxy settings to remove errors in request syntax.
  • D. Update Refresh Token Manually.

Answer: D

 

NEW QUESTION 67
An engineer is configuring XMPP federation on the Cisco IM and Presence server and has changed the security settings to TLS Optional on one node in the cluster. What is the next step in the configuration process?

  • A. Start the Cisco DB Replicator
  • B. Restart the Cisco Presence Engine
  • C. Start the Cisco Replication Watcher.
  • D. Restart the Cisco XCP Router.

Answer: D

 

NEW QUESTION 68
Drag and drop the steps of the SAML SSO process from the left into the order on the right.

Answer:

Explanation:

 

NEW QUESTION 69
......

Cisco 300-810: Selling CCNP Collaboration Products and Solutions: https://www.actual4exams.com/300-810-valid-dump.html

300-810 exam dumps and online Test Engine: https://drive.google.com/open?id=1UMubtJivKNgQAEak8xedynSAx3oxVYLe