Bearable cost

We have to admit that the Constructing H3C High-Performance Campus Networks exam certification is difficult to get, while the exam fees is very expensive. So, some people want to prepare the test just by their own study and with the help of some free resource. They do not want to spend more money on any extra study material. But the exam time is coming, you may not prepare well. Here, I think it is a good choice to pass the exam at the first time with help of the Constructing H3C High-Performance Campus Networks actual questions & answer rather than to take the test twice and spend more money, because the money spent on the Constructing H3C High-Performance Campus Networks exam dumps must be less than the actual exam fees. Besides, we have the money back guarantee that you will get the full refund if you fail the exam. Actually, you have no risk and no loss. Actually, the price of our H3C Constructing H3C High-Performance Campus Networks exam study guide is very reasonable and affordable which you can bear. In addition, we provide one year free update for you after payment. You don't spend extra money for the latest version. What a good thing.

At last, I want to say that our H3CSE-Routing & Switching Constructing H3C High-Performance Campus Networks actual test is the best choice for your 100% success.

H3C GB0-371-ENU braindumps Instant Download: Our system will send you the GB0-371-ENU braindumps file you purchase in mailbox in a minute after payment. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)

Because of the demand for people with the qualified skills about H3C Constructing H3C High-Performance Campus Networks certification and the relatively small supply, Constructing H3C High-Performance Campus Networks exam certification becomes the highest-paying certification on the list this year. While, it is a tough certification for passing, so most of IT candidates feel headache and do not know how to do with preparation. In fact, most people are ordinary person and hard workers. The only way for getting more fortune and living a better life is to work hard and grasp every chance as far as possible. Gaining the GB0-371-ENU Constructing H3C High-Performance Campus Networks exam certification may be one of their drams, which may make a big difference on their life. As a responsible IT exam provider, our Constructing H3C High-Performance Campus Networks exam prep training will solve your problem and bring you illumination.

Customizable experience from Constructing H3C High-Performance Campus Networks test engine

Most IT candidates prefer to choose Constructing H3C High-Performance Campus Networks test engine rather than the pdf format dumps. After all, the pdf dumps have some limits for the people who want to study with high efficiency. GB0-371-ENU Constructing H3C High-Performance Campus Networks test engine is an exam test simulator with customizable criteria. The questions are occurred randomly which can test your strain capacity. Besides, score comparison and improvement check is available by Constructing H3C High-Performance Campus Networks test engine, that is to say, you will get score and after each test, then you can do the next study plan according to your weakness and strengths. Moreover, the Constructing H3C High-Performance Campus Networks test engine is very intelligent, allowing you to set the probability of occurrence of the wrong questions. Thus, you can do repetition training for the questions which is easy to be made mistakes. While the interface of the test can be set by yourself, so you can change it as you like, thus your test looks like no longer dull but interesting. In addition, the H3CSE-Routing & Switching Constructing H3C High-Performance Campus Networks test engine can be installed at every electronic device without any installation limit. You can install it on your phone, doing the simulate test during your spare time, such as on the subway, waiting for the bus, etc. Finally, I want to declare the safety of the Constructing H3C High-Performance Campus Networks test engine. Constructing H3C High-Performance Campus Networks test engine is tested and verified malware-free software, which you can rely on to download and installation.

H3C Constructing H3C High-Performance Campus Networks Sample Questions:

1. Which statement is correct about the communication between switch VLANs?

A) In RSTP, the downstream device will respond to the BPDU with Agreement set only after receiving the BPDU with both Proposa and Agreement set to from the upstream device
B) Both RSTP and MSTP require the designated port of the upstream device to perform rapid migration after receiving the Agreement message from the downstream device
C) In the figure, by default, the SWA port E1/0/1 needs to wait twice the duration of the Forward Delay before it can enter the Forwarding state
D) By configuring stp no-agreement-check on the port, the MSTP switch will not check whether the Agreement bit is set in the Proposal BPDU sent upstream

2. The Ethernets port configuration of the switch SWA is as follows:
interface Ethernet 1/0/1
port link-type trunk
port trunk permit vlan 10
port trunk pvid vlan 20
Now you need to modify the Ethernet1/0/1 port of the switch SWA to a Hybrid port, PVID is VLAN20, and the data frame of VLAN20 is not tagged, and the data frame of VLAN 10 is tagged, Then the following configuration process is correct (choose one or more)

A) [SWA-Ethernet1/0/1]port link-type hybrid
B) [SWA-Ethernet1/0/1]undoportlink-type [SWA-Ethernet1 /0/1 ]portlink-type hybrid[SWA-Ethernet1/0/1]port hybrid pvid vlan 20 [SWA-Ethernet1/0/1]port hybrid vlan 10 tagged
C) None of the above is correct
D) [SWA-Ethernet1/0/1]port link-type access [SWA-Ethernet1/0/1]port access vlan 20 [SWA-Ethernet1/0/1]port link-type hybrid [SWA-Ethernet1/0/1]port hybrid vlan 10 tagged
E) [SWA-Ethernet1/0/1]portlink-type access [SWA-Ethernet1/0/1]port link-type hybrid [SWA-Ethernet1/0/1]port hybrid pvid vlan 20 [SWA-Ethernet1/0/1]port hybrid vlan 10 tagged

3. In the network shown in the figure, the switch SWA is a two-layer switch, and the router RTA is the gateway of each PC. The following configuration is made on the router RTA:
[RTA]interface Ethernet 0/0.1
[RTA-Ethernet0/0.1]ip address 10.10.10.1 255.255.255.0
[RTA-EthernetO/0.1 ]vlan-type dotlq vid 1
[RTA-Ethernet0/0.1 Jinterface ethernet 0/0.2
[RTA-Ethernet0/0.2]ip address 20.20.20.1 255.255.255.0
[RTA-Ethernet0/0.2]vlan-type dotlq vid 2
[RTA-Ethernet0/0.2]interface ethernet 0/0.3
[RTA-Ethernet0/0.3]ip address 30.30.30.1 255.255.255.0
[RTA-Ethernet0/0.3]vlan-type dotlq vid 3
After completing the phase configuration on the switch SWA, PCA, PCB and PCC can all ping their own gateway. The following is correct about the switch SWA port Ethernet1/0/4 (choose one or more)

A) interfaceEthernet1/0/4 port link-mode bridge port link-type trunk port trunk permit vlan all port trunk pvid vlan 2
B) interface Ethernet 1/0/4 port link-mode bridge port link-type trunk port trunk permit vlan all port trunk pvid vlan 10
C) interface Ethernet1/0/4 port link-mode bridge port link-type trunk port trunk permit vlan all port trunk pvid vlan 3
D) interfaceEthernet1/0/4 port link-mode bridge port link-type trunk port trunk permit vlan all

4. In the network as shown in the figure, the PIMSM protocol runs between RT1, RT2 and RT3, the RP is 1.1.1.1 RT3 is connected to the receiver, and IGMP is enabled on the corresponding interface, and the unicast routing table is viewed in RT3 as follows :
[RT3]display ip routing-table
Routing Tables: Public
Destinations: 10 Routes: 10
Destination/MaskProtoPreCost NextHop Interface
1.1.1.1/320SPF 10 1562 192.168.0.1 S0/2/0
127.0.0.0/8 Direct 00127.0.0.1 InLoopO
127.0.0.1/32Direct 00127.0.0.1 InLoopO
192.168.0.0/30Direct 00192.168.0.2 S0/2/0
192.168.0.1/32Direct 00192.168.0.1 S0/2/0
192.168.0.2/32Direct 00127.0.0.1 InLoopO
192.168.1.0/300SPF 10 3124 192.168.2.1 so/2/1
192.168.2.0/30Direct 00192.168.2.2 so/2/1
192.168.2.1/32Direct 00192.168.2.1 so/2/1
192.168.2.2/32Direct 00127.0.0.1 InLoopO
Then, when the receiver (Receiver) sends a group join request, which of the following routers have (*, G) entries

A) RT1
B) RT2
C) RT3

5. Regarding the configuration of BPDU and TCNBPDU, the statements are correct.

A) AIternate port will neither send configuration BPDU nor TCNBPDU
B) Configure BPDUs to be sent only from the designated port, and TCNBPDUs to be sent only from the root port
C) The configuration BPDU is usually received only from the root port, and the TCNBPDU is only received from the designated port
D) Configuration BPDUs are usually only sent periodically by the root bridge, and TCNBPDUs may be sent by other bridges except the root bridge.

Solutions: