Because of the demand for people with the qualified skills about Microsoft Managing and Maintaining a Microsoft Windows Server 2003 Environment certification and the relatively small supply, Managing and Maintaining a Microsoft Windows Server 2003 Environment exam certification becomes the highest-paying certification on the list this year. While, it is a tough certification for passing, so most of IT candidates feel headache and do not know how to do with preparation. In fact, most people are ordinary person and hard workers. The only way for getting more fortune and living a better life is to work hard and grasp every chance as far as possible. Gaining the 70-290 Managing and Maintaining a Microsoft Windows Server 2003 Environment exam certification may be one of their drams, which may make a big difference on their life. As a responsible IT exam provider, our Managing and Maintaining a Microsoft Windows Server 2003 Environment exam prep training will solve your problem and bring you illumination.

Customizable experience from Managing and Maintaining a Microsoft Windows Server 2003 Environment test engine

Most IT candidates prefer to choose Managing and Maintaining a Microsoft Windows Server 2003 Environment test engine rather than the pdf format dumps. After all, the pdf dumps have some limits for the people who want to study with high efficiency. 70-290 Managing and Maintaining a Microsoft Windows Server 2003 Environment test engine is an exam test simulator with customizable criteria. The questions are occurred randomly which can test your strain capacity. Besides, score comparison and improvement check is available by Managing and Maintaining a Microsoft Windows Server 2003 Environment test engine, that is to say, you will get score and after each test, then you can do the next study plan according to your weakness and strengths. Moreover, the Managing and Maintaining a Microsoft Windows Server 2003 Environment test engine is very intelligent, allowing you to set the probability of occurrence of the wrong questions. Thus, you can do repetition training for the questions which is easy to be made mistakes. While the interface of the test can be set by yourself, so you can change it as you like, thus your test looks like no longer dull but interesting. In addition, the MCP Managing and Maintaining a Microsoft Windows Server 2003 Environment test engine can be installed at every electronic device without any installation limit. You can install it on your phone, doing the simulate test during your spare time, such as on the subway, waiting for the bus, etc. Finally, I want to declare the safety of the Managing and Maintaining a Microsoft Windows Server 2003 Environment test engine. Managing and Maintaining a Microsoft Windows Server 2003 Environment test engine is tested and verified malware-free software, which you can rely on to download and installation.

Bearable cost

We have to admit that the Managing and Maintaining a Microsoft Windows Server 2003 Environment exam certification is difficult to get, while the exam fees is very expensive. So, some people want to prepare the test just by their own study and with the help of some free resource. They do not want to spend more money on any extra study material. But the exam time is coming, you may not prepare well. Here, I think it is a good choice to pass the exam at the first time with help of the Managing and Maintaining a Microsoft Windows Server 2003 Environment actual questions & answer rather than to take the test twice and spend more money, because the money spent on the Managing and Maintaining a Microsoft Windows Server 2003 Environment exam dumps must be less than the actual exam fees. Besides, we have the money back guarantee that you will get the full refund if you fail the exam. Actually, you have no risk and no loss. Actually, the price of our Microsoft Managing and Maintaining a Microsoft Windows Server 2003 Environment exam study guide is very reasonable and affordable which you can bear. In addition, we provide one year free update for you after payment. You don't spend extra money for the latest version. What a good thing.

At last, I want to say that our MCP Managing and Maintaining a Microsoft Windows Server 2003 Environment actual test is the best choice for your 100% success.

Microsoft 70-290 braindumps Instant Download: Our system will send you the 70-290 braindumps file you purchase in mailbox in a minute after payment. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)

Microsoft Managing and Maintaining a Microsoft Windows Server 2003 Environment Sample Questions:

1. You are a network administrator for your company. The network contains a Windows Server 2003 file
server named Server1.
There are eight SCSI hard disk drives installed on Server1. Disk 0 hosts the volume that contains the
operating system.
You must review the disk configurations of Server1 and identify which of the disks can fail at the same time
but leaving the server fully operational after a restart.
Click the Active Exhibit button to view a simulation of Server1.
After viewing the exhibit, click the Close Simulation button to return to this screen to answer the question.
Which of the disks can fail at the same time but leave the server fully operational after a restart?

A) Disks 6 and 7 can fail at the same time.
B) Disks 0, 1, and 4 can fail at the same time.
C) Disks 0, 1, and 2 can fail at the same time.
D) Disks 0 and 5 can fail at the same time.

2. You have a standalone server named Server1 that runs Windows Server 2003 Service Pack 2 (SP2).
You install the FTP Server Windows component on Server1. You create several folders under the Ftproot folder as shown in the exhibit. (Click the Exhibit button.)

A user named User1 connects to ftp://server1 and reports that he can view the Localuser folder and all of its subfolders. A user named User2 reports the same problem. You need to ensure that when users connect to ftp://server1, they can only view the content located under their user folder.
What should you do?

A) From the properties of each user account, modify the home folder. Remove the Users group from the access control list of c:\inetpub\ftproot.
B) From the properties of the Default FTP Site, change the directory listing style to Unix.
C) Delete the Default FTP Site. Create a new FTP site. Select the option to isolate users and specify the FTP site directory of c:\inetpub\ftproot.
D) From the properties of the Default FTP Site, change the FTP site directory to c:\inetpub\ftproot\localuser.

3. You are the network administrator for your company. The network consists of a single Active Directory domain.
All network servers run Windows Server 2003, and all are members of the domain. All client computers run Windows XP Professional. Five Web servers host the content for the internal network. Each one runs IIS and has Remote Desktop connections enabled. Web developers are frequently required to update content
on the Web servers.
You need to ensure that the Web developers can use Remote Desktop Connection to transfer Web
documents from their client computers to the five Web servers.
What should you do?

A) Install the Terminal Server option on all five Web servers. Use Terminal Services Configuration Manager to modify the session directory setting.
B) On each Web developer's client computer, select the Disk Drives check box in the properties of Remote Desktop Connection.
C) On each Web developer's client computer, select the Allow users to connect remotely to this computer check box in the System Properties dialog box.
D) Install the Terminal Server option on all five Web servers. Use Terminal Services Configuration Manager to create a new Microsoft RDP 5.2 connection.

4. You have two servers named Server1 and Server2 that run Windows Server 2003 Service Pack 2 (SP2).
Both servers have Remote Desktop enabled.
You log on to the console of Server1 and begin to defragment the C: volume.
You log on to Server2.
From Server2, you need to view the status of the defragment job on Server1.
What should you do?

A) Run mstsc.exe /server:Server1.
B) Run defrag.exe \\server1\c$ a.
C) Run mstsc.exe /console, and then connect to Server1.
D) Run compmgmt.msc, and then connect to Server1.

5. Your network consists of a single Active Directory domain. All servers run Windows Server 2003 Service
Pack 2 (SP2).
All client computers run Windows XP Professional Service Pack 3 (SP3).
You enable and configure Terminal Server on a server named Server1. A firewall separates Server1 from
the internal network.
Internal users report that they cannot connect to Server1 by using Remote Desktop Connection.
You need to ensure that the users can connect to Server1 by using Remote Desktop Connection.
Which port should you open on the firewall?

A) 3389
B) 389
C) 3268
D) 5900

Solutions: