Because of the demand for people with the qualified skills about Microsoft TS: Visual Studio Tools for 2007 MS Office System (VTSO) certification and the relatively small supply, TS: Visual Studio Tools for 2007 MS Office System (VTSO) exam certification becomes the highest-paying certification on the list this year. While, it is a tough certification for passing, so most of IT candidates feel headache and do not know how to do with preparation. In fact, most people are ordinary person and hard workers. The only way for getting more fortune and living a better life is to work hard and grasp every chance as far as possible. Gaining the 70-543 TS: Visual Studio Tools for 2007 MS Office System (VTSO) exam certification may be one of their drams, which may make a big difference on their life. As a responsible IT exam provider, our TS: Visual Studio Tools for 2007 MS Office System (VTSO) exam prep training will solve your problem and bring you illumination.

Customizable experience from TS: Visual Studio Tools for 2007 MS Office System (VTSO) test engine

Most IT candidates prefer to choose TS: Visual Studio Tools for 2007 MS Office System (VTSO) test engine rather than the pdf format dumps. After all, the pdf dumps have some limits for the people who want to study with high efficiency. 70-543 TS: Visual Studio Tools for 2007 MS Office System (VTSO) test engine is an exam test simulator with customizable criteria. The questions are occurred randomly which can test your strain capacity. Besides, score comparison and improvement check is available by TS: Visual Studio Tools for 2007 MS Office System (VTSO) test engine, that is to say, you will get score and after each test, then you can do the next study plan according to your weakness and strengths. Moreover, the TS: Visual Studio Tools for 2007 MS Office System (VTSO) test engine is very intelligent, allowing you to set the probability of occurrence of the wrong questions. Thus, you can do repetition training for the questions which is easy to be made mistakes. While the interface of the test can be set by yourself, so you can change it as you like, thus your test looks like no longer dull but interesting. In addition, the MCTS TS: Visual Studio Tools for 2007 MS Office System (VTSO) test engine can be installed at every electronic device without any installation limit. You can install it on your phone, doing the simulate test during your spare time, such as on the subway, waiting for the bus, etc. Finally, I want to declare the safety of the TS: Visual Studio Tools for 2007 MS Office System (VTSO) test engine. TS: Visual Studio Tools for 2007 MS Office System (VTSO) test engine is tested and verified malware-free software, which you can rely on to download and installation.

Bearable cost

We have to admit that the TS: Visual Studio Tools for 2007 MS Office System (VTSO) exam certification is difficult to get, while the exam fees is very expensive. So, some people want to prepare the test just by their own study and with the help of some free resource. They do not want to spend more money on any extra study material. But the exam time is coming, you may not prepare well. Here, I think it is a good choice to pass the exam at the first time with help of the TS: Visual Studio Tools for 2007 MS Office System (VTSO) actual questions & answer rather than to take the test twice and spend more money, because the money spent on the TS: Visual Studio Tools for 2007 MS Office System (VTSO) exam dumps must be less than the actual exam fees. Besides, we have the money back guarantee that you will get the full refund if you fail the exam. Actually, you have no risk and no loss. Actually, the price of our Microsoft TS: Visual Studio Tools for 2007 MS Office System (VTSO) exam study guide is very reasonable and affordable which you can bear. In addition, we provide one year free update for you after payment. You don't spend extra money for the latest version. What a good thing.

At last, I want to say that our MCTS TS: Visual Studio Tools for 2007 MS Office System (VTSO) actual test is the best choice for your 100% success.

Microsoft 70-543 braindumps Instant Download: Our system will send you the 70-543 braindumps file you purchase in mailbox in a minute after payment. (If not received within 12 hours, please contact us. Note: don't forget to check your spam.)

Microsoft TS: Visual Studio Tools for 2007 MS Office System (VTSO) Sample Questions:

1. You are creating an add-in for Microsoft Office Excel 2007 by using Visual Studio Tools for the Microsoft Office System (VSTO). You write the following code segment for the add-in class.
Dim pane As Microsoft.Office.Tools.CustomTaskPane
Private Sub CreatePane ()
Pane = Me.CustomTaskPanes.Add (New MyUserControl (), _
"Do Something")
pane.Visible = True
End Sub
Users must open multiple workbooks in Excel.
You need to ensure that the add-in displays the same instance of the task pane when a user views any of the open workbooks.
What should you do?

A) Create the following event handler for the Application.WorkbookOpen event. Private Sub Application_WorkbookOpen ( ByVal Wb As Excel.Workbook ) CreatePane () End Sub
B) Create the following event handler for the Application.WorkbookActivate event. Private Sub Application_WorkbookActivate _ ( ByVal Wb As Excel.Workbook ) CreatePane () End Sub
C) Create the following event handler for the Application.WindowActivate event. Private Sub Application_WindowActivate _ ( ByVal Wb As Excel.Workbook , ByVal Wn As Excel.Window ) CreatePane () End Sub
D) Create the following event handler for the ThisAddIn.StartUp event. Private Sub ThisAddIn_Startup _ ( ByVal sender As Object, ByVal e As System.EventArgs ) CreatePane () End Sub

2. You are creating an add-in for Microsoft Office Word 2007 by using Visual Studio Tools for the Microsoft Office System (VSTO). You write the following lines of code.
Microsoft.Office.Tools.CustomTaskPane pane;
private void CreatePane () {
pane = this.CustomTaskPanes.Add (new MyUserControl (),
"Do Something");
pane.Visible = true;
}
You need to ensure that only a single instance of the custom task pane is displayed in each single document interface (SDI) window.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)

A) Create the following event handler for the Application.ActiveDocument.New event. void ActiveDocument_New () { CreatePane (); }
B) Create the following event handler for the Application.NewDocument event. void Application_DocumentNew ( Word.Document Doc) { CreatePane (); }
C) Create the following event handler for the Application.WindowActivate event. void Application_WindowActivate ( Word.Document Doc, Word.Window Wn ) { CreatePane (); }
D) Create the following event handler for the ThisAddIn.StartUp event. void ThisAddIn_Startup (object sender, System.EventArgs e) { CreatePane (); }
E) Create the following event handler for the Application.DocumentOpen event. void Application_DocumentOpen ( Word.Document Doc) { CreatePane (); }

3. You create a custom template for Microsoft Office Word 2007 by using Visual Studio Tools for the Microsoft Office System (VSTO). You add a content control to the custom template. The content control is a placeholder for the first paragraph in the documents that use the custom template. You need to ensure that the users can edit the first paragraph but cannot delete it. Which code segment should you use?

A) control.LockContentControl = False control.LockContents = True
B) control.LockContentControl = True control.LockContents = False
C) control.LockContentControl = False control.LockContents = False
D) control.LockContentControl = True control.LockContents = True

4. You develop an add-in for Microsoft Office Excel by using Visual Studio Tools for the Microsoft Office System (VSTO). The add-in contains a class that uses the following method.
Public Sub ProcessCells ()
Dim ws As Excel.Worksheet = CType _
( Application.ActiveSheet , Excel.Worksheet ) Dim values As List(Of Object) = New List(Of Object)()
'Your code goes here
End Sub
The add-in must retrieve the values for the cells in the range A1 through E3.
You need to exclude empty cell values when you retrieve cell values from the range.
Which code segment should you use?

A) Dim rng As Excel.Range = ws.Range ("A1", "E3") For x As Integer = 1 To 3 For y As Integer = 1 To 5 Dim r As Excel.Range = rng.Cells (x, y) If Not r Is Nothing Then values.Add (r.Value2) End If Next Next '...
B) Dim rng As Excel.Range = ws.Range ("A1", "E3") For Each r As Excel.Range In rng.Cells If Not r.Value2 Is Nothing Then values.Add (r.Value2) End If Next '...
C) Dim rng As Excel.Range = ws.Range ("A1", "E3") For Each r As Excel.Range In rng.Cells If Not r Is Nothing Then values.Add (r.Value2) End If Next '...
D) Dim rng As Excel.Range = ws.Range ("A1", "E3") For x As Integer = 0 To 2 For y As Integer = 0 To 5 Dim r As Excel.Range = rng.Cells (x, y) If Not r.Value2 Is Nothing Then values.Add (r.Value2) End If Next Next '...

5. You are creating an add-in for Microsoft Office Word 2007 by using Visual Studio Tools for the Microsoft Office System (VSTO). You write the following lines of code.
Private Pane As Microsoft.Office.Tools.CustomTaskPane
Private Sub ThisAddIn_Startup _
(ByVal sender As Object, ByVal e As System.EventArgs)
Pane = Me.CustomTaskPanes.Add _
(New MyUserControl(), "Do Something")
End Sub
You need to display the custom task pane when text is selected in a Word document.
What should you do?

A) Create the following event handler for the Application.WindowActivate event. Private Sub Application_WindowActivate _ (ByVal Doc As Word.Document, ByVal Wn As Word.Window) If Doc.Content.Text.Length > 0 Then Pane.Visible = False Else Pane.Visible = True End If End Sub
B) Create the following event handler for the Application.DocumentChange event. Private Sub Application_DocumentChange() Dim Doc As Word.Document = Application.ActiveDocument If Doc.Content.Text.Length > 0 Then Pane.Visible = False Else Pane.Visible = True End If End Sub
C) Create the following event handler for the Pane.VisibleChanged event. Private Sub Pane_VisibleChanged _ (ByVal sender As Object, ByVal e As EventArgs) Dim Doc As Word.Document = Application.ActiveDocument If Doc.Content.Text.Length > 0 Then Pane.Visible = False Else Pane.Visible = True End If End Sub
D) Create the following event handler for the Application.WindowSelectionChange event. Private Sub Application_WindowSelectionChange(ByVal Sel As Word.Selection) If Sel.Start = Sel.End Then Pane.Visible = False Else Pane.Visible = True End If End Sub

Solutions:

Question # 1 Answer: D

Question # 2 Answer: B,E

Question # 3 Answer: B

Question # 4 Answer: B

Question # 5 Answer: D