300-625 Exam Questions Dumps, Selling Cisco Products
300-625 Cert Guide PDF 100% Cover Real Exam Questions
In case you are willing to start preparing for the Cisco 300-625 test, you are advised to familiarize yourself with the full list of its topics, which includes the following:
- Deployment (15%): The first section is about the initial setup, installation processes, and secure boot. This means that you should know about POAP, DCNM, and NX-OS;
- Implementation (35%): This is the largest area of the test that covers a lot of details that you need to know about. Thus, it is important to know how to implement FCoE, Fibre Channel port channels, NPIV and NPV, Fibre Channel protocol services, VSANs and VSAN extensions, as well as zoning and device aliases. Besides that, you should have the knowledge of the Enhanced transmission selection, priority flow control, and FCoE Initialization Protocol;
- MDS Troubleshooting (25%): To be able to answer the questions from this subject area, you need to have knowledge of how to troubleshoot the issues with upgrade and boot, zone merge and zoning failure, as well as duplicate domain ID and Fibre Channel domains.
- Monitoring & Management (25%): Here, your skills in configuring RBAC, DCNM, and Fibre Channel fabric security will be evaluated. A potential candidate has to know about the slow-drain analysis and implementation of SAN telemetry streaming. Don’t forget about the DCNM-SAN client, DCNM Device Manager, and licensing options as well;
NEW QUESTION 32
Refer to the exhibit.
A storage network engineer gets remote access to two Cisco MDS 9000 Series Switches with an ISL trunk and receives several log messages. Which set of actions resolve the problem while least affecting service?
- A. 1. Add :11:11:11:11:11:11:11:13 pwwn in zone Server11 and activate Zoneset10-A on MDS-A.
2. Remove VSAN 10 from the allowed VSAN range of interface fc1/11 on MDS-A and add it back in the range. - B. 1. Deactivate zone set Zoneset10-A on MDS-A.
2. shut/no shut interface fc1/11 on MDS-A. - C. 1. Explicitly import zone set Zoneset10-A on MDS-B using the zoneset import interface import fc1/11 vsan 10 command.
2. Activate the zone set Zoneset10-A. - D. 1. Add :11:11:11:11:11:11:11:13 pwwn in zone Server11 and activate Zoneset10-A on MDS-A.
2. shut/no shut interface fc1/11 on MDS-A.
Answer: D
NEW QUESTION 33
Which result occurs if a device alias is renamed and then the original device alias name is used in an add command in the same session?
- A. The rename command is moved to the rejected list and the add command executes successfully.
- B. The device alias is renamed and the add command is moved to the rejected list.
- C. Both commands execute successfully.
- D. Both commands are moved to the rejected list.
Answer: A
NEW QUESTION 34
Refer to the exhibit. A storage network engineer gets remote access to two Cisco MDS 9000 Series Switches with an ISL trunk and receives several log messages. Which set of actions resolve the problem while least affecting service?
- A. 1. Add :11:11:11:11:11:11:11:13 pwwn in zone Server11 and activate Zoneset10-A on MDS-A.
2. Remove VSAN 10 from the allowed VSAN range of interface fc1/11 on MDS-A and add it back in the range. - B. 1. Deactivate zone set Zoneset10-A on MDS-A.
2. shut/no shut interface fc1/11 on MDS-A. - C. 1. Explicitly import zone set Zoneset10-A on MDS-B using the zoneset import interface import fc1/11 vsan 10 command.
2. Activate the zone set Zoneset10-A. - D. 1. Add :11:11:11:11:11:11:11:13 pwwn in zone Server11 and activate Zoneset10-A on MDS-A.
2. shut/no shut interface fc1/11 on MDS-A.
Answer: D
NEW QUESTION 35
Which EtherType is used by the FCoE Initialization Protocol?
- A. 0*8906
- B. 0*8913
- C. 0*xfc0e
- D. 0*8914
Answer: D
NEW QUESTION 36
Which two components are required for successful MDS USB POAP (Choose two.)
- A. ENTERPRISE_PKG license
- B. system and kickstart images
- C. script named poap_script pl
- D. NTFS formatted USB drive
- E. USB drive in port 1
Answer: B,C
Explanation:
Section: Deployment
NEW QUESTION 37
Drag and drop the items from the left onto the correct descriptions on the right. Not all items are used.
Answer:
Explanation:
NEW QUESTION 38
Two stable fabrics have overlapping domains. After a switch from the first domain is joined to a switch from the second domain, both switches become isolated. What caused the problem?
- A. The autoreconfigure option is enabled on both switches.
- B. The rcf-reject option is disabled on the interfaces.
- C. The rcf-reject option is enabled on the interfaces.
- D. The autoreconfigure option is disabled on both switches.
Answer: D
NEW QUESTION 39
A storage administrator is upgrading Cisco NX-OS on a Cisco MDS switch. The administrator performs an ISSU upgrade following the configuration guide. While the install is proceeding, the administrator connects a new server to the switch, which cannot access storage. The existing servers continue to operate properly through the switch. Why is the new server failing to connect?
- A. The fabric data plane resets as part of the upgrade process.
- B. The zoning database is locked during the upgrade process.
- C. The upgrade process disables any currently unused ports.
- D. The new server is unable to log in to the fabric to receive an FC-ID.
Answer: B
Explanation:
Section: MDS Troubleshooting
NEW QUESTION 40
Refer to the exhibit.
A user who is logged in as an operator cannot update the zoneset. What is the cause of this issue?
- A. The fabric is locked by admin on another switch.
- B. Hard zoning is enabled.
- C. The fabric is locked by admin on switch-2.
- D. The switch has a conflicting domain ID.
- E. Merge control is disabled.
Answer: C
Explanation:
Section: MDS Troubleshooting
Explanation/Reference:
NEW QUESTION 41
DRAG DROP
Drag and drop the FLOGI parameters from the left onto the descriptions from which they were-derived on the right.
Select and Place:
Answer:
Explanation:
Section: Implementation
Explanation/Reference: https://www.cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_3_x/configuration/ guides/cli_3_3_1/npv.html#wp1502832
NEW QUESTION 42
Which condition requires using a device alias rather than a Fibre Channel alias?
- A. Aliases must be saved within a central database on the fabric
- B. The zone database must be distributed over the fabric
- C. All aliases being used are being configured in the same VSAN
- D. The same alias must be used in zoning as well as DPVM
Answer: D
NEW QUESTION 43
Two stable fabrics have overlapping domains. After a switch from the first domain is joined to a switch from the second domain, both switches become isolated. What caused the problem?
- A. The autoreconfigure option is enabled on both switches.
- B. The rcf-reject option is disabled on the interfaces.
- C. The rcf-reject option is enabled on the interfaces.
- D. The autoreconfigure option is disabled on both switches.
Answer: D
Explanation:
Section: MDS Troubleshooting
Explanation/Reference:
NEW QUESTION 44
A storage administrator wants to enable NPV in a Fibre Channel edge switch. Which configuration is supported in this mode?
- A. Dynamic Port VSAN Membership
- B. local switching of east-west traffic
- C. E Port connectivity to the core switch
- D. Cisco Fabric Services distribution over Fibre Channel
Answer: D
Explanation:
Section: Implementation
NEW QUESTION 45
Which two components are Required for successful MDS USB POAP? (Choose two)
- A. ENTERPRISE_PKG license
- B. system and kickstart images
- C. NTFS formatted USB drive
- D. script named poap_script.pl
- E. USB drive in port 1
Answer: A,B
NEW QUESTION 46
A network engineer must run a core Cisco Nexus 9500 Series Switch as a POAP server for all top-of-rack Cisco Nexus switches Which two network functions must run to provide the POAP service? (Choose two)
- A. PXE
- B. DNS
- C. BOOTP
- D. TFTP
- E. DHCP
Answer: C,D
NEW QUESTION 47
What is the function of the 0xFFFFFC address in a Fibre Channel fabric?
- A. name server
- B. time server
- C. fabric controller
- D. management server
Answer: A
Explanation:
Section: Implementation
Explanation
NEW QUESTION 48
Refer to the exhibit.
Which configuration change improves the ability of the link to recover from frame loss?
- A. Increase the send buffer size to 15000 KB.
- B. Disable PMTU discovery.
- C. Increase the reset timeout.
- D. Enable selective acknowledgment.
Answer: D
Explanation:
Section: Implementation
Explanation
NEW QUESTION 49
Which configuration is available only in Cisco DCNM-SAN Advanced mode?
- A. VMpath configuration
- B. zoning
- C. IVR
- D. template-based provisioning
Answer: C
NEW QUESTION 50
......
Additional Resources
For impactful self-study regarding your 300-625 DCSAN exam, we would recommend the book “How I Passed Implementing Cisco Storage Area Networking Exam” [Kindle Edition]. Packed with some viable and result-oriented information, this guide by Rocismo Liolentz Publications will surely make the exam journey easy-to-accomplish. The material is available in English and is a great way to learn about effective methodologies.
Pass 300-625 Exam - Real Questions & Answers: https://www.actual4exams.com/300-625-valid-dump.html