300-625 Practice Exam and Study Guides - Verified By Actual4Exams Updated 72 Questions
2022 Updated Verified Pass 300-625 Study Guides & Best Courses
Typical Candidate Profile
Think of the Cisco 300-625 exam only if you want to cement your feet in the world of Cisco data center technologies. Alone or in combination with other tests, it allows one to hone competencies related to this field and solidify their knowledge base. Professionals who have already been working in a job role like technical/technological decision-makers or network architects are perfect for this exam.
NEW QUESTION 26
Which EtherType is used by the FCoE Initialization Protocol?
- A. 0*xfc0e
- B. 0*8906
- C. 0*8913
- D. 0*8914
Answer: D
NEW QUESTION 27
Refer to the exhibit.
Which command is used to determine which switch has the lock?
- A. show fcs ie vsan
- B. show zoneset active
- C. show zone status
- D. show flogi database
Answer: C
Explanation:
Section: Management and Monitoring
NEW QUESTION 28
Which feature on MDS platforms ensures that the code that is running on the hardware platform is authentic and unmodified, while also validating the BIOS to eliminate any rootkits.
- A. UEFI Secure Boot
- B. Secure Unique Device Identifier
- C. Cisco Secure Boot
- D. BIOS Secure Boot
Answer: C
Explanation:
Section: Deployment
NEW QUESTION 29
An engineer is configuring a SAN environment and attempts to activate a zoneset, but a lock is held by another user.
Which argument does the engineer use to clear the lock from the zoning database configuration?
- A. abort
- B. force
- C. commit
- D. clear
Answer: D
NEW QUESTION 30
Drag and Drop Question
Drag and drop the boot issues from the left onto the correct solutions on the right.
Answer:
Explanation:
NEW QUESTION 31
A storage administrator wants to enable NPV in a Fibre Channel edge switch. Which configuration is supported in this mode?
- A. local switching of east-west traffic
- B. Cisco Fabric Services distribution over Fibre Channel
- C. E Port connectivity to the core switch
- D. Dynamic Port VSAN Membership
Answer: B
NEW QUESTION 32
DRAG DROP
Drag and drop the boot issues from the left onto the correct solutions on the right.
Select and Place:
Answer:
Explanation:
Section: MDS Troubleshooting
Explanation
NEW QUESTION 33
Which configuration is needed to enable manual ESP mode for Fibre Channel TrustSec on Cisco MDS switches?
- A. MDS(config)# interface fc 1/1
MDS(config-if)# fcsp esp manual
MDS(config-if-fcsp)# mode gcm - B. MDS(config)# fcsp esp manual
- C. MDS(config)# interface fc 1/1
MDS(config-if)# fcsp mode gcm
MDS(config-if-fcsp)# fcsp esp manual - D. MDS(config)# interface fc 1/1
MDS(config-if)# fcsp esp manual
Answer: D
Explanation:
Section: Management and Monitoring
NEW QUESTION 34
Which condition requires using a device alias rather than a Fibre Channel alias?
- A. The same alias must be used in zoning as well as DPVM
- B. The zone database must be distributed over the fabric
- C. All aliases being used are being configured in the same VSAN
- D. Aliases must be saved within a central database on the fabric
Answer: A
NEW QUESTION 35
Which condition requires using a device alias rather than a Fibre Channel alias?
- A. The zone database must be distributed over the fabric.
- B. The same alias must be used in zoning as well as DPVM.
- C. All aliases being used are being configured in the same VSAN.
- D. Aliases must be saved within a central database on the fabric.
Answer: A
Explanation:
Section: Implementation
NEW QUESTION 36
Which Cisco NX-OS command displays the VSAN that is associated with each FCID?
- A. show fc2 plogi
- B. show flogi database
- C. show fcdomain
- D. show vsan database
Answer: C
Explanation:
Section: Deployment
NEW QUESTION 37
An engineer is configuring a SAN environment and attempts to activate a zoneset, but a lock is held by another user. Which argument does the engineer use to clear the lock from the zoning database configuration?
- A. abort
- B. force
- C. commit
- D. clear
Answer: D
NEW QUESTION 38
A storage administrator is enabling DH-CHAP for the first time on a Fibre Channel fabric. Which condition must the administrator consider while configuring this feature?
- A. The MD5 hash must be used if TACACS+ or RADIUS authentication for FCSP is enabled.
- B. Enabling DH-CHAP protocol feature is unsupported on FCIP interfaces.
- C. All switches on the fabric must be configured for the same password.
- D. NTP must be configured on all devices or the configuration fails.
Answer: D
NEW QUESTION 39
Which tool was used to manage Cisco Storage networking before Cisco DCNM?
- A. Cisco UCS Director
- B. Cisco Fabric Manager
- C. Cisco Adaptive Security Device Manager
- D. Cisco UCS Manager
Answer: B
NEW QUESTION 40
Refer to the exhibit. A port channel has been configured between a Cisco MDS and a Cisco Fabric Interconnect switch. Which interface(s) in the port channel carry the control plane traffic?
- A. from interface fc1/9
- B. from interface fc1/10
- C. per flow, balanced between interfaces fc1/9 and fc1/10
- D. per packet, balanced between interfaces fc1/9 and fc1/10
Answer: C
NEW QUESTION 41
Which two components are Required for successful MDS USB POAP? (Choose two)
- A. NTFS formatted USB drive
- B. ENTERPRISE_PKG license
- C. system and kickstart images
- D. script named poap_script.pl
- E. USB drive in port 1
Answer: B,C
NEW QUESTION 42
Refer to the exhibit
Refer to the exhibit. What is the result of merging the fabric?
- A. The merged fabric IVR VSAN topology is set to activate
- B. The merge is invalid
- C. The merged fabric contains only service group Group1
- D. The merged fabric has NAT enabled
Answer: C
NEW QUESTION 43
Refer to the exhibit.
Which configuration change improves the ability of the link to recover from frame loss?
- A. Increase the send buffer size to 15000 KB.
- B. Increase the reset timeout.
- C. Enable selective acknowledgment.
- D. Disable PMTU discovery.
Answer: C
Explanation:
Section: Implementation
NEW QUESTION 44
Which action must be performed to deactivate a VSAN without losing its configuration?
- A. Delete it.
- B. Rename it.
- C. Isolate it.
- D. Suspend it.
Answer: D
Explanation:
Section: Implementation
NEW QUESTION 45
Which feature on MDS platforms ensures that the code that is running on the hardware platform is authentic and unmodified, while also validating the BIOS to eliminate any rootkits?
- A. Cisco Secure Boot
- B. UEFI Secure Boot
- C. Secure Unique Device Identifier
- D. BIOS Secure Boot
Answer: B
NEW QUESTION 46
Which two protocols are used to implement SAN telemetry on Cisco MDS switches? (Choose two.)
- A. gRPC encoding
- B. GPB encoding
- C. RPC transport
- D. GPB transport
- E. gRPC transport
Answer: B,E
Explanation:
Section: Management and Monitoring
NEW QUESTION 47
Which two protocols are used to implement SAN telemetry on Cisco MDS switches? (Choose two.)
- A. gRPC encoding
- B. GPB encoding
- C. RPC transport
- D. GPB transport
- E. gRPC transport
Answer: B,E
NEW QUESTION 48
Which configuration is needed to enable manual ESP mode for Fibre Channel TrustSec on Cisco MDS switches?
- A. MDS(config)# interface fc 1/1
MDS(config-if)# fcsp esp manual
MDS(config-if-fcsp)# mode gcm - B. MDS(config)# fcsp esp manual
- C. MDS(config)# interface fc 1/1
MDS(config-if)# fcsp mode gcm
MDS(config-if-fcsp)# fcsp esp manual - D. MDS(config)# interface fc 1/1
MDS(config-if)# fcsp esp manual
Answer: D
NEW QUESTION 49
......
Ultimate Guide to the 300-625 - Latest Edition Available Now: https://www.actual4exams.com/300-625-valid-dump.html