Feb 08, 2024 Updated HPE6-A72 Dumps Questions For HP Exam
Best Value Available Preparation Guide for HPE6-A72 Exam
NEW QUESTION # 27
Which port or ports should be allowed through a firewall so that an AOS-CX switch can act as an SNMP Agent?
- A. UDP 1812 and UDP 1813
- B. UDP 162
- C. TCP 443
- D. UDP 161
Answer: D
NEW QUESTION # 28
Refer to the exhibit.
Using the static IP address configured above, what is the converted binary value of the third octet assigned to the local interface?
- A. 0
- B. 1
- C. 2
- D. 01001011
Answer: B
NEW QUESTION # 29
What is a benefit of choosing a 3-Tier design with routing at the Aggregation layer?
- A. Shifting endpoint access to the Aggregation layer from the Access layer
- B. Using access control lists (ACLs) at the Core to improve performance
- C. Connecting WAN/MPLS and Data center access to the Aggregation layer
- D. Better Core router performance by offloading processing
Answer: D
NEW QUESTION # 30
What are the benefits of a 3-Tier design over a 2-Tier? (Choose two.)
- A. Gaining the flexibility to connect the Data-Center to any Access layer switch.
- B. Can use lower speed links between Core to Aggregation and Aggregation to Access given the use of an Aggregation layer.
- C. Offloading processing from the Core without routing at the Access layer.
- D. Lowering the cost of a deployment due to needing less switches overall.
- E. Better scalability in a campus with a large number of buildings.
Answer: C,E
NEW QUESTION # 31
Refer to the exhibit.
Traffic is failing between Core-1 and Host-B. IP addressing has correctly been applied, and all interfaces are attached to the vrf GREEN.
Which configuration will correct the issue?
- A. Core-1(config)# ip route 10.1.20.0/24 10.1.1.2 vrf GREEN Host-B: assign the default-gateway address 10.1.20.181
- B. Host-B: assign the default-gateway address 10.1.20.181
- C. Core-1(config)# ip route 10.1.20.0/24 10.1.1.2 vrf GREEN Host-B: assign the default-gateway address 10.1.20.1
- D. Core-2(config)# ip route 0.0.0.0/0 10.1.1.1 vrf GREEN Host-B: assign the default-gateway address 10.1.20.181
Answer: A
NEW QUESTION # 32
Refer to the exhibit.
The above output is the result of issuing the command show system resource-utilization. What command should be used to enable terminal output line by line or page by page?
- A. The command less
- B. The command page
- C. The command more
- D. The command terminal length 30
Answer: B
NEW QUESTION # 33
Match the terms to the correct layer of the OSI model.
Answer:
Explanation:
NEW QUESTION # 34
Refer to the exhibit.
What commands will successfully enable the SVI for vlan 100 on interface 1/1/1 to produce the results displayed in the command show ip interface brief in the exhibit below?
- A. Access-1(config)# interface 1/1/1
Access-1(config-if)# routing
Access-1(config-if)# interface vlan 100
Access-1(config-if-vlan)# ip address 10.1.1.1/24 - B. Access-1(config)# interface 1/1/1
Access-1(config-if)# vlan trunk permit vlan 100
Access-1(config-if)# interface vlan 100
Access-1(config-if-vlan)# ip address static 10.1.1.1/24 - C. Access-1(config)# interface vlan 100
Access-1(config-if-vlan)# ip address 10.1.1.1/24 - D. Access-1(config-if)# vlan 100
Access-1(config-vlan)# ip address 10.1.1.1/24
Answer: C
NEW QUESTION # 35
Which two statements accurately describe the features of NetEdit? (Choose two.)
- A. NetEdit can perform configuration and compliance validation.
- B. NetEdit can be used to configure and validate any third-party device that supports SSH and REST access.
- C. NetEdit includes trial licensing for up to 10 nodes.
- D. NetEdit can run on a mobile device using Android or Apple IOS.
- E. NetEdit supports viewing and editing multiple devices using a single deployment plan.
Answer: A,E
NEW QUESTION # 36
Refer to the exhibit.
The above command was applied to an Aruba AOS-CX 6300M 24-port switch with 4-port SFP56 uplinks. All ports are set as access switchports.
Which ports carry VLAN 1 traffic?
- A. 1/1/8, 1/1/10, 1/1/5-1/1/24
- B. 1/1/1-1/1/24
- C. 1/1/1-1/1/28
- D. 1/1/8-1/1/10, 1/1/5-1/1/28
Answer: D
NEW QUESTION # 37
Which network category applies to a SOHO internal network?
- A. WAN
- B. SD-WAN
- C. LAN
- D. Internet
Answer: D
NEW QUESTION # 38
What connectivity commands are available on AOS-CX switches? (Choose two.)
- A. netstatus
- B. ping
- C. pathping
- D. traceroute
- E. tracert
Answer: B,D
NEW QUESTION # 39
What are two methods for remotely managing an Aruba AOS-CX switch? (Choose two.)
- A. SNMPv2c
- B. USB-C console
- C. Telnet
- D. SSH
- E. HTTPS
Answer: D,E
NEW QUESTION # 40
Which two statements accurately describe stacking with Aruba switches? (Choose two.)
- A. A VSF stack is allowed between an AOS-CX 6300M and 6300F switches.
- B. VSF is a core or aggregation layer stacking technology due to the high resiliency of sharing a single control plane.
- C. The VSF feature is not compatible between AOS-CX and AOS platforms.
- D. A VSF stack is allowed between an AOS 5400R and an AOS-CX 6400.
- E. VSF and VSX are stacking option with the AOS-CX 8320. 8325. 8400. and 6400 models.
Answer: B,E
NEW QUESTION # 41
Match the switching term to the correct definition.
Answer:
Explanation:
NEW QUESTION # 42
Refer to the exhibit.
You are in the process of configuring VSF between Access-1 and Access-2. Access-1 has been configured as the VSF Master.
What is a valid configuration for Access-2 to join the VSF stack?
- A. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 2 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - B. Access-2# configure
Access-2(config)# vsf member 2 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - C. Access-2# configure
Access-2(config)# vsf member 1 Access-2(config)# vsf renumber-to 2 Access-2(vsf-member-1)# link 2 2/1/28 Access-2(vsf-member-1)# exit This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y - D. Access-2# configure
Access-2(config)# vsf member 1 Access-2(vsf-member-1)# link 1 1/1/28 Access-2(vsf-member-1)# exit Access-2(config)# vsf renumber-to 2
Answer: B
Explanation:
This will save the VSF configuration and reboot the switch. Do you want to continue (y/n)? y
NEW QUESTION # 43
Which command can be used to find the serial number of an Aruba OS-CX switch?
- A. The command show system
- B. The command inventory
- C. The command version
- D. The command show running-configuration
Answer: A
Explanation:
Explanation/Reference:
NEW QUESTION # 44
Which two statements are true regarding Checkpoints on Aruba switches? (Choose two.)
- A. Stacking switches using VSF or VSX will disable the Checkpoint feature.
- B. System-generated checkpoints are created after a configuration change and 5 minutes of inactivity.
- C. Rolling back to a prior checkpoint triggers a reboot of the switch.
- D. A checkpoint is a snapshot of the running-configuration and relevant metadata at the time the checkpoint was created.
- E. Checkpoints are available on AOS 5400R switches, as well as on all AOS-CX switches.
Answer: D,E
NEW QUESTION # 45
......
Full HPE6-A72 Practice Test and 90 Unique Questions, Get it Now!: https://www.actual4exams.com/HPE6-A72-valid-dump.html
The Best HPE6-A72 Exam Study Material Premium Files and Preparation Tool: https://drive.google.com/open?id=1XG--cJjIQWxrrVzK_l-YyuP4oi92FUDM