Free NS0-173 braindumps download (NS0-173 exam dumps Free Updated Dec 14, 2021)
NS0-173 Dumps for Pass Guaranteed - Pass NS0-173 Exam 2021
Network Appliance NS0-173 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 4 |
|
| Topic 5 |
|
NEW QUESTION 12
After you install a FlexPod infrastructure at a customer site, you need to migrate the existing Vmware virtual machines off the infrastructure that was used before FlexPod was installed.
Which VMware vSphere feature accomplishes this task?
- A. vSphere DRS
- B. VM Component Protection
- C. vSphere HA
- D. vMotion
Answer: D
NEW QUESTION 13
A customer wants to extend a Layer 2 network over a Layer 3 Nexus 9000 infrastructure.
Which Layer 2 overlay scheme accomplishes this task?
- A. STP
- B. VXLAN
- C. vPC
- D. EIGRP
Answer: B
Explanation:
XLAN tunnels the Layer 2 network over the Layer.
NEW QUESTION 14
A customer wants to deploy a FlexPod solution that involves directly connecting the NetApp AFF storage using the FCoE protocol to the Cisco UCS Fabric Interconnects.
In this scenario, which Cisco UCS Fibre Channel mode would be used to accomplish this task?
- A. switching mode
- B. trunk mode
- C. end host mode
- D. access mode
Answer: A
NEW QUESTION 15
A service provider is designing a FlexPod configuration to host multiple customers in a hybrid cloud environment, where IP address-range conflicts might arise on the shared storage.
Which NetApp feature should be enabled to prevent these conflicts?
- A. SVMs
- B. broadcast domains
- C. failover groups
- D. IPspaces
Answer: D
NEW QUESTION 16
A FlexPod solution has been configured for iSCSI SAN boot with multiple paths between the server and the storage.
In this scenario, how many initiators (IQNs) per server will need to be added in the corresponding igroup in ONTAP?
- A. one
- B. four
- C. two
- D. three
Answer: B
Explanation:
The initator group REST API allows you to create, update, delete, and discover initiator groups, and add and remove initiators that can access the target and associated LUNs.
NEW QUESTION 17
A customer has verified physical connectivity on the FlexPod. However, the LUNs are not available on the Cisco UCS server. To make the LUNs visible to the UCS, the customer must enable a switching feature for zoning.
In this scenario, what should the customer do?
- A. Enable the device connector feature in Cisco UCS Manager.
- B. Enable NPV on all switches.
- C. Enable NPIV on all switches.
- D. Enable Spine mode on all the Cisco Nexus 9000 switches.
Answer: A
NEW QUESTION 18
A customer with a FlexPod Express solution wants to enable remote access to the NetApp storage component.
In this scenario, which two access methods are recommended? (Choose two.)
- A. SSH
- B. SAML
- C. RDP
- D. Telnet
Answer: A,D
NEW QUESTION 19
The storage administrator must change the vHBA settings bound to a template associated with a production server.
What happens when the settings are reconfigured in this scenario?
- A. The server that is associated with the service profile reboots.
- B. The vHBA template is deleted from UCS Manager.
- C. The vHBA configuration change does not affect LUN access.
- D. The service profile template that is associated with the server is initialized.
Answer: D
NEW QUESTION 20
Which Cisco Nexus series switch supports NX-OS standalone mode or Application Centric Infrastructure (ACI) fabric mode?
- A. Nexus 9000
- B. Nexus 5000
- C. Nexus 7000
- D. Nexus 3000
Answer: A
NEW QUESTION 21
A customer is planning to use a pair of MDS switches in a FlexPod design to host a few SAN workloads.
In this scenario, which two features should be enabled on the MDS switches for a successful configuration? (Choose two.)
- A. NPIV
- B. fport-channel-trunk
- C. port-channel-trunk
- D. NPV
Answer: A,C
NEW QUESTION 22
An architect is designing a FlexPod environment with Cisco Nexus 5000 switches to SAN boot all of the ESXi hosts over FC.
In this scenario, what should the LUN ID number be?
- A. LUN 2
- B. LUN 3
- C. LUN 0
- D. LUN 1
Section: (none)
Explanation
Answer: C
NEW QUESTION 23
A customer is planning to deploy a FlexPod solution for a large scale SAN requirement that uses the FC protocol. The customer plans to use Smart Zoning in the configurations to reduce the number of TCAM entries in the zoning process.
In this scenario, which design would enable the customer to use Smart Zoning?
- A. storage connected to Cisco MDS switches
- B. storage connected to Cisco Nexus 5000 Series switches
- C. storage directly connected to Cisco UCS Fabric Interconnects
- D. storage connected to Cisco Nexus 9000 Series switches
Answer: A
NEW QUESTION 24
Your customer has a FlexPod implementation and wants to use life-cycle management to validate, monitor, and optimize the FlexPod infrastructure.
In this situation, which management tool should your customer use?
- A. Cisco UCS Director
- B. NetApp OnCommand Unified Manager
- C. Cisco UCS Manager
- D. NetApp Converged System Advisor
Answer: A
Explanation:
Cisco UCS Director can be an integral companion for FlexPod because it allows holistic management through centralized automation and orchestration from a single, unified view. When FlexPod and Cisco UCS Director are combined, IT can shift time and focus from managing infrastructure to delivering new service innovation. Used together, FlexPod and Cisco UCS Director deliver:
NEW QUESTION 25
Click the Exhibit button.
The total number of servers that a Cisco UCS Mini chassis supports is set to a maximum of how many hosts as shown in the exhibit?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 26
A customer wants to design a FlexPod configuration based on a CVD that was published 10 months ago. The customer wants to ensure that they are using the latest hardware and software versions.
In this scenario, which two tools are used to identify the latest supported hardware and software? (Choose two.)
- A. NetApp Interoperability Matrix Tool
- B. Cisco UCS Hardware and Software Interoperability Matrix
- C. Cisco UCS Director
- D. NetApp OnCommand System Manager
Answer: B,C
Explanation:
C: When using this matrix to determine recommended driver versions for you server configuration, please reference the server's Blade/Rack Bundle firmware version for the recommended driver in the event that your servers are running Mixed Firmware from your Infrastructure Bundle.
D: Cisco UCS Director delivers unified, highly secure management for supported compute, network, storage, and virtualization platforms and for the industry's leading converged infrastructure solutions
NEW QUESTION 27
Which port type would you configure when you connect a chassis to the Cisco Fabric Interconnects?
- A. FC storage ports
- B. server ports
- C. appliance ports
- D. Ethernet uplink ports
Answer: A
NEW QUESTION 28
Which two Unified Computing System capabilities are required to achieve stateless computing? (Choose two.)
- A. boot from SAN
- B. blade servers
- C. templates
- D. service profiles
Answer: B,D
Explanation:
Cisco introduced the idea of stateless computing with its blade server design.
A Cisco UCS instance allows you to quickly align computing resources in the data center with rapidly changing business requirements. This built-in flexibility is determined by whether you choose to fully implement the stateless computing feature.
Pools of servers and other system resources can be applied as necessary to respond to workload fluctuations, support new applications, scale existing software and business services, and accommodate both scheduled and unscheduled downtime. Server identity can be abstracted into a mobile service profile that can be moved from server to server with minimal downtime and no need for additional network configuration.
NEW QUESTION 29
An administrator decides to connect storage directly to UCS Fabric Interconnect to support FCoE within a FlexPod configuration.
In this scenario, which port type should be defined on the Fabric Interconnect ports that are connected to the storage controller?
- A. server port
- B. uplink port
- C. appliance port
- D. monitor port
Answer: B
NEW QUESTION 30
A customer has deployed a FlexPod Datacenter with Red Hat Enterprise Linux OpenStack Platform. The Cinder storage volumes that are attached to the Nova instances are not available.
Based on the terms of the cooperative support model, which three companies would the customer use to open a support case? (Choose three.)
- A. NetApp
- B. VMware
- C. Red Hat
- D. Cisco
- E. Microsoft
Answer: A,C,D
NEW QUESTION 31
A customer is designing a FlexPod solution to use both NFS and iSCSI for connectivity, including traditional FC for legacy applications. The Cisco UCS Fabric Interconnects will be connected to both Nexus 9000 Series switches and FC switches.
Which UCS capability allows you to accomplish this task?
- A. unified ports
- B. FC uplink ports
- C. VSANs
- D. SAN pin groups
Answer: A
NEW QUESTION 32
Your customer has a FlexPod solution with a 2-node switchless ONTAP system, Cisco Nexus 93108 switches, and Cisco UCS B-Series servers. The customer wants to expand to a 4-node ONTAP storage cluster.
Which configuration is valid for expansion?
- A. Add two Nexus 3232C switches for the cluster interconnect.
- B. Add one Nexus 3232C switch for the cluster interconnect.
- C. Add two Nexus 93108 switches for the cluster interconnect.
- D. Use the existing Nexus 93108 switches for the cluster interconnect.
Answer: A
NEW QUESTION 33
......
Verified NS0-173 dumps Q&As - Pass Guarantee Exam Dumps Test Engine: https://www.actual4exams.com/NS0-173-valid-dump.html