Latest [Jan 18, 2022] Realistic Verified NS0-173 Dumps
Pass Network Appliance NS0-173 Exam Updated 62 Questions
NEW QUESTION 19
Click the Exhibit button.
The total number of servers that a Cisco UCS Mini chassis supports is set to a maximum of how many hosts as shown in the exhibit?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: D
NEW QUESTION 20
After you install a FlexPod infrastructure at a customer site, you need to migrate the existing Vmware virtual machines off the infrastructure that was used before FlexPod was installed.
Which VMware vSphere feature accomplishes this task?
- A. vSphere DRS
- B. VM Component Protection
- C. vSphere HA
- D. vMotion
Answer: D
NEW QUESTION 21
You are configuring high availability within the network layer of your FlexPod configuration.
In this scenario, what are two Cisco best practices for designing vPC on your Cisco 9000 Series switches?
(Choose two.)
- A. The vPC auto-recovery feature should be enabled.
- B. Peer keep-alive connectivity between the switches should be established.
- C. A minimum of four 10GB Ethernet connections are required for vPC.
- D. Port channels should be configured for LACP passive mode.
Answer: B,C
Explanation:
vPC also relies on the periodic keepalive messages to determine when one of the connected devices on the peer link fails.
vPC peer link - The link used to synchronize states between the vPC peer devices. Both ends must be on 10- Gigabit Ethernet or 40-Gigabit Ethernet interfaces.
Reference:
configuration/guide/b_Cisco_Nexus_9000_Series_NX-OS_Interfaces_Configuration_Guide/ b_Cisco_Nexus_9000_Series_NX-OS_Interfaces_Configuration_Guide_chapter_0111.html
NEW QUESTION 22
An administrator decides to connect storage directly to UCS Fabric Interconnect to support FCoE within a FlexPod configuration.
In this scenario, which port type should be defined on the Fabric Interconnect ports that are connected to the storage controller?
- A. server port
- B. uplink port
- C. appliance port
- D. monitor port
Answer: B
NEW QUESTION 23
You want to deploy a FlexPod Datacenter solution based on the minimum hardware requirements.
Which three components must be deployed in highly available pairs to accomplish this task? (Choose three.)
- A. Cisco UCS 5108 Chassis
- B. Cisco APICs
- C. Cisco USC Nexus Switches
- D. Cisco UCS Fabric Interconnects
- E. NetApp FAS Storage Controllers
Answer: A,D,E
NEW QUESTION 24
Two data centers are 75km apart. The customer wants to deploy a FlexPod solution in each data center to maintain high availability between the two sites with minimal possible data loss.
In this scenario, which technology would you use at the NetApp storage layer?
- A. SnapVault
- B. SnapMirror
- C. FlexArray
- D. MetroCluster
Answer: D
NEW QUESTION 25
Click the Exhibit button.
Referring to the exhibit, what is the name given to the link between the two Cisco Nexus switches?
- A. vPC peer connection
- B. vPC Domain ID
- C. vPC peer domain
- D. vPC peer link
Answer: D
NEW QUESTION 26
Click the Exhibit button.
You are designing a FlexPod Datacenter solution for Microsoft Windows 2012 with Hyper-V. All hosts will boot from the SAN, including management hosts. The management hosts are Cisco C-Series servers.
Referring to the exhibit, which adapters are required to boot the management servers from the SAN?
- A. two 10GbE CNAs
- B. two 10GbE NICs
- C. two 1GbE NICs
- D. two 8Gb HBAs
Answer: B
NEW QUESTION 27
A customer is designing a FlexPod solution to use both NFS and iSCSI for connectivity, including traditional FC for legacy applications. The Cisco UCS Fabric Interconnects will be connected to both Nexus 9000 Series switches and FC switches.
Which UCS capability allows you to accomplish this task?
- A. unified ports
- B. FC uplink ports
- C. VSANs
- D. SAN pin groups
Answer: A
NEW QUESTION 28
The storage administrator must change the vHBA settings bound to a template associated with a production server.
What happens when the settings are reconfigured in this scenario?
- A. The server that is associated with the service profile reboots.
- B. The vHBA template is deleted from UCS Manager.
- C. The vHBA configuration change does not affect LUN access.
- D. The service profile template that is associated with the server is initialized.
Answer: D
NEW QUESTION 29
Which Cisco Nexus series switch supports NX-OS standalone mode or Application Centric Infrastructure (ACI) fabric mode?
- A. Nexus 9000
- B. Nexus 5000
- C. Nexus 7000
- D. Nexus 3000
Answer: A
NEW QUESTION 30
You are configuring a FlexPod system for NAS protocols. You want to ensure that there are multiple paths between the initiators and targets in the solution.
Which two steps will accomplish this task? (Choose two.)
- A. Disable LACP.
- B. Configure the VLANs in Cisco UCS Manager as Common/Global.
- C. Allow the VLANs over the vPC peer link.
- D. Configure the VSANs in the Cisco Nexus 5000 switches.
Answer: A,B
NEW QUESTION 31
Your customer has a FlexPod implementation and wants to use life-cycle management to validate, monitor, and optimize the FlexPod infrastructure.
In this situation, which management tool should your customer use?
- A. Cisco UCS Director
- B. NetApp OnCommand Unified Manager
- C. Cisco UCS Manager
- D. NetApp Converged System Advisor
Answer: A
Explanation:
Cisco UCS Director can be an integral companion for FlexPod because it allows holistic management through centralized automation and orchestration from a single, unified view. When FlexPod and Cisco UCS Director are combined, IT can shift time and focus from managing infrastructure to delivering new service innovation. Used together, FlexPod and Cisco UCS Director deliver:
NEW QUESTION 32
A customer is configuring the UCS to handle a multitenant environment. The customer has created an organization within UCS for each tenant and would like to allow access to these organizations for only users that belong to that tenant.
In this scenario, which feature in UCS Manager should the customer use to accomplish this task?
- A. User Roles
- B. Locales
- C. Service Profile
- D. Trusted Platform Module
Answer: C
NEW QUESTION 33
A customer wants to extend a Layer 2 network over a Layer 3 Nexus 9000 infrastructure.
Which Layer 2 overlay scheme accomplishes this task?
- A. STP
- B. VXLAN
- C. vPC
- D. EIGRP
Answer: B
Explanation:
XLAN tunnels the Layer 2 network over the Layer.
NEW QUESTION 34
A customer with a FlexPod Express solution wants to enable remote access to the NetApp storage component.
In this scenario, which two access methods are recommended? (Choose two.)
- A. SSH
- B. SAML
- C. RDP
- D. Telnet
Answer: A,D
NEW QUESTION 35
A customer has several existing standalone Cisco UCS C-Series servers that they would like to repurpose and add to their FlexPod Datacenter solution.
Which action should the customer perform on these servers before using UCS Manager?
- A. Remove the hard disks on each server.
- B. Zero-out the FlexFlash cards on each server.
- C. Reset the CIMC to the factory settings on each server.
- D. Reboot the CIMC on each server.
Answer: C
Explanation:
On rare occasions, such as an issue with the current running firmware, troubleshooting a server may require you to reset the CIMC to the factory default. When this happens, all user-configurable settings are reset. This procedure is not part of the normal server maintenance. After you reset the CIMC, you are logged off and must log in again. You may also lose connectivity and may need to reconfigure the network settings.
NEW QUESTION 36
What are characteristics of the Cisco UCS 5108 blade chassis?
- A. 4 RU, 8 half-width UCS B-series blades, 40 Gbps I/O bandwidth
- B. 4 RU, 6 half-width UCS B-Series blades, 160 Gbps I/O bandwidth
- C. 6 RU, 8 half-width UCS B-series blades, 160 Gbps I/O bandwidth
- D. 6 RU, 6 half-width UCS B-series blades, 80 Gbps I/O bandwidth
Answer: C
NEW QUESTION 37
A customer has installed FlexPod and verified that all wiring connections are correct. However, the customer cannot see any FC LUNs from the NetApp AFF systems.
In this scenario, which three configuration elements should the customer verify? (Choose three.)
- A. MTU configuration
- B. igroup configuration
- C. FC portsets
- D. FC zoning
- E. ALUA settings
Answer: A,B,C
NEW QUESTION 38
A customer wants to deploy a performance-sensitive workload while leveraging NetApp Snapshot technology and technologies such as NAS and SAN.
Which architecture satisfies these requirements?
- A. NetApp SolidFire
- B. NetApp AFF
- C. NetApp StorageGRID
- D. NetApp EF-Series
Answer: A
NEW QUESTION 39
A client has a FlexPod Datacenter solution with four active fabric links in port channel mode established between the Cisco Fabric Interconnects and the IOMs on a Cisco 5108 blade chassis. The blade chassis is fully populated with Cisco UCS B200M5 blades. A worker in the data center inadvertently unplugs the fourth uplink cable from IOM-A while working in the rack.
In this scenario, what happens to the network traffic?
- A. Traffic is load-balanced within IOM-B.
- B. Traffic is load-balanced within IOM-A.
- C. There is a loss of connectivity for servers 4 and 8.
- D. Connectivity for servers 3, 4, 7, and 8 all fail over to IOM-B.
Answer: D
NEW QUESTION 40
You are asked to design a FlexPod solution with a Cisco UCS B-Series chassis. There is no requirement for any Cisco UCS C-Series rack servers. You must ensure that there is a minimum of a 2500 VLAN or VSAN capacity per UCS domain.
In this scenario, which Cisco Fabric Interconnects do you select?
- A. 0
- B. 1
- C. 2
- D. 3
Answer: B
NEW QUESTION 41
A customer is using a FlexPod implementation that has 10 Gbps uplinks from the B-Series chassis to the fabric interconnect. The customer wants to upgrade the links to 40 Gbps.
In this scenario, which model of Cisco UCS server IOM is required?
- A. 0
- B. 2204XP.
- C. 1
- D. 2208XP
Answer: B
Explanation:
The Cisco UCS 2204XP Fabric Extender (Figure 7) has four 10 Gigabit Ethernet, FCoE-capable, SFP+ ports that connect the blade chassis to the fabric interconnect.
NEW QUESTION 42
......
Network Appliance NS0-173 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
Get 2022 Updated Free Network Appliance NS0-173 Exam Questions & Answer: https://www.actual4exams.com/NS0-173-valid-dump.html