NSE4_FGT-6.4 Practice Exam and Study Guides - Verified By Actual4Exams Updated 165 Questions
2022 Updated Verified Pass NSE4_FGT-6.4 Study Guides & Best Courses
Understanding functional and technical aspects of Network Security Professional (Fortinet NSE4_FGT-6.4) Professional Exam
The following will be dicussed in FORTINET NSE4_FGT-6.4 exam dumps:
- Executing a meshed or partially redundant VPN
- Understanding network access to configured networks
- Diagnosing declined IKE exchanges
- Understanding of encryption used to bypass security policies
- Proposing Fortinet Single Sign-On access to network services, integrated with Microsoft Active Directory
- Learn about SSL/TLS-secured traffic
- Gain experience to configure security profiles to offset threats and ill-usage, including viruses, torrents, and improper websites
- Collection of log entries
- How to Deploy implicit and explicit proxy with firewall policies, authentication, and caching
- SSL VPN
- Identify users using firewall policies
- Deploying FortiGate devices as an HA cluster for high performance
- Learn port forwarding, source NAT, and destination NAT
- Authorizing an IPsec VPN tunnel connecting two FortiGate devices
- Understand encryption uses and certificates
- Deploying FortiGate devices as an HA cluster for fault tolerance
- Learn application control methods to monitor and control network applications
- Learn examining traffic transparently, forwarding
How to study the Network Security Professional (Fortinet NSE4_FGT-6.4) Professional Exam
Test Preparation teaches how the exam questions can to be decoded. Our Exam Preparedness: Fortinet NSE4_FGT-6.4- Technical arrangement course is delivered in multiple configurations: study hall preparing for learning or taking an interest in a physical homeroom with an NSE4 Approved Learner. Free media preparing for learning whenever it is suitable for you. The course surveys test inquiries in each branch of knowledge and how the themes tried ought to be seen to such an extent that off base answers are easier to stay away from. Our course will help you in tracking down the correct answers.
FORTINET NSE4_FGT-6.4 practice test can be used for preparation.
NEW QUESTION 39
You have enabled logging on your FortiGate device for Event logs and all Security logs, and you have set up logging to use the FortiGate local disk.
What is the default behavior when the local disk is full?
- A. Logs are overwritten and the only warning is issued when log disk usage reaches the threshold of 95%.
- B. No new log is recorded until you manually clear logs from the local disk.
- C. No new log is recorded after the warning is issued when log disk usage reaches the threshold of 95%.
- D. Logs are overwritten and the first warning is issued when log disk usage reaches the threshold of 75%.
Answer: D
NEW QUESTION 40
The HTTP inspection process in web filtering follows a specific order when multiple features are enabled in the web filter profile.
What order must FortiGate use when the web filter profile has features enabled, such as safe search?
- A. FortiGuard category filter and rating filter
- B. Static domain filter, SSL inspection filter, and external connectors filters
- C. DNS-based web filter and proxy-based web filter
- D. Static URL filter, FortiGuard category filter, and advanced filters
Answer: B
NEW QUESTION 41
Refer to the exhibit.
The exhibit contains a network interface configuration, firewall policies, and a CLI console configuration.
How will FortiGate handle user authentication for traffic that arrives on the LAN interface?
- A. If there is a full-through policy in place, users will not be prompted for authentication.
- B. Users from the HR group will be prompted for authentication and can authenticate successfully with the correct credentials.
- C. Users from the Sales group will be prompted for authentication and can authenticate successfully with the correct credentials.
- D. Authentication is enforced at a policy level; all users will be prompted for authentication.
Answer: D
NEW QUESTION 42
Refer to the exhibit.
Which contains a network diagram and routing table output.
The Student is unable to access Webserver.
What is the cause of the problem and what is the solution for the problem?
- A. The first reply packet for Student failed the RPF check.
This issue can be resolved by adding a static route to 10.0.4.0/24 through wan1. - B. The first packet sent from Student failed the RPF check.
This issue can be resolved by adding a static route to 10.0.4.0/24 through wan1. - C. The first packet sent from Student failed the RPF check.
This issue can be resolved by adding a static route to 203.0.114.24/32 through port3. - D. The first reply packet for Student failed the RPF check.
This issue can be resolved by adding a static route to 203.0.114.24/32 through port3.
Answer: D
NEW QUESTION 43
Refer to the exhibit showing a debug flow output.
Which two statements about the debug flow output are correct? (Choose two.)
- A. The default route is required to receive a reply.
- B. A new traffic session is created.
- C. A firewall policy allowed the connection.
- D. The debug flow is of ICMP traffic.
Answer: B,D
NEW QUESTION 44
Refer to the FortiGuard connection debug output.
Based on the output shown in the exhibit, which two statements are correct? (Choose two.)
- A. FortiGate is using default FortiGuard communication settings.
- B. One server was contacted to retrieve the contract information.
- C. A local FortiManager is one of the servers FortiGate communicates with.
- D. There is at least one server that lost packets consecutively.
Answer: B,D
Explanation:
Explanation/Reference:
NEW QUESTION 45
What is the effect of enabling auto-negotiate on the phase 2 configuration of an IPsec tunnel?
- A. FortiGate automatically negotiates different encryption and authentication algorithms with the remote peer.
- B. FortiGate automatically negotiates a new security association after the existing security association expires.
- C. FortiGate automatically brings up the IPsec tunnel and keeps it up, regardless of activity on the IPsec tunnel.
- D. FortiGate automatically negotiates different local and remote addresses with the remote peer.
Answer: C
Explanation:
https://kb.fortinet.com/kb/documentLink.do?externalID=12069
NEW QUESTION 46
What is the limitation of using a URL list and application control on the same firewall policy, in NGFW policy-based mode?
- A. It limits the scope of application control to scan application traffic on DNS protocol only.
- B. It limits the scope of application control to scan application traffic based on application category only.
- C. It limits the scope of application control to the browser-based technology category only.
- D. It limits the scope of application control to scan application traffic using parent signatures only
Answer: B
NEW QUESTION 47
When browsing to an internal web server using a web-mode SSL VPN bookmark, which IP address is used as the source of the HTTP request?
- A. The remote user's virtual IP address.
- B. The public IP address of the FortiGate device.
- C. remote user's public IP address
- D. The internal IP address of the FortiGate device.
Answer: D
Explanation:
Source IP seen by the remote resources is FortiGate's internal IP address and not the user's IP address
NEW QUESTION 48
Refer to the exhibit.
The exhibit displays the output of the CLI command: diagnose sys ha dump-by vcluster.
Which two statements are true? (Choose two.)
- A. FortiGate SN FGVM010000065036 HA uptime has been reset.
- B. FortiGate devices are not in sync because one device is down.
- C. FortiGate SN FGVM010000064692 is the primary because of higher HA uptime.
- D. FortiGate SN FGVM010000064692 has the higher HA priority.
Answer: A,C
NEW QUESTION 49
An administrator has configured the following settings:
What does the configuration do? (Choose two.)
- A. Blocks denied users for 30 minutes.
- B. Reduces the amount of logs generated by denied traffic.
- C. Enforces device detection on all interfaces for 30 minutes.
- D. Creates a session for traffic being denied.
Answer: B,D
NEW QUESTION 50
Which two settings can be separately configured per VDOM on a FortiGate device? (Choose two.)
- A. NGFW mode
- B. FortiGuaid update servers
- C. Operating mode
- D. System time
Answer: A,C
NEW QUESTION 51
Examine the exhibit, which contains a virtual IP and firewall policy configuration.
The WAN (port1) interface has the IP address 10.200.1.1/24. The LAN (port2) interface has the IP address 10.0.1.254/24.
The first firewall policy has NAT enabled on the outgoing interface address. The second firewall policy is configured with a VIP as the destination address.
Which IP address will be used to source NAT the Internet traffic coming from a workstation with the IP address 10.0.1.10/24?
- A. 10.0.1.254
https://help.fortinet.com/fos50hlp/54/Content/FortiOS/fortigate-firewall-52/Firewall%20Objects/Virtual%20IPs.htm - B. 10.200.1.1
- C. Any available IP address in the WAN (port1) subnet 10.200.1.0/24
- D. 10.200.1.10
Answer: C
NEW QUESTION 52
Examine this output from a debug flow:
Why did the FortiGate drop the packet?
- A. It matched the default implicit firewall policy.
https://kb.fortinet.com/kb/documentLink.do?externalID=13900 - B. The next-hop IP address is unreachable.
- C. It failed the RPF check.
- D. It matched an explicitly configured firewall policy with the action DENY.
Answer: A
NEW QUESTION 53
Refer to the exhibit, which contains a radius server configuration.
An administrator added a configuration for a new RADIUS server. While configuring, the administrator selected the Include in every user group option What will be the impact of using Include in every user group option in a RADIUS configuration?
- A. This option places all FortiGate users and groups required to authenticate into the RADIUS server, which, in this case, is FortiAuthenticator.
- B. This option places all users into every RADIUS user group, including groups that are used for the LDAP server on FortiGate.
- C. This option places the RADIUS server, and all users who can authenticate against that server, into every RADIUS group.
- D. This option places the RADIUS server, and all users who can authenticate against that server, into every FortiGate user group.
Answer: D
NEW QUESTION 54
Refer to the exhibit.
A network administrator is troubleshooting an IPsec tunnel between two FortiGate devices. The administrator has determined that phase 1 status is up. but phase 2 fails to come up.
Based on the phase 2 configuration shown in the exhibit, what configuration change will bring phase 2 up?
- A. On HQ-FortiGate, set Encryption to AES256.
- B. On HQ-FortiGate, enable Diffie-Hellman Group 2.
- C. On Remote-FortiGate, set Seconds to 43200.
- D. On HQ-FortiGate, enable Auto-negotiate.
Answer: B
NEW QUESTION 55
Examine this FortiGate configuration:
How does the FortiGate handle web proxy traffic coming from the IP address 10.2.1.200 that requires authorization?
- A. It always authorizes the traffic without requiring authentication.
- B. It authenticates the traffic using the authentication scheme SCHEME2.
- C. It authenticates the traffic using the authentication scheme SCHEME1.
- D. It drops the traffic.
Answer: C
Explanation:
Explanation
"What happens to traffic that requires authorization, but does not match any authentication rule? The active and passive SSO schemes to use for those cases is defined under config authentication setting"
NEW QUESTION 56
View the exhibit.
Which of the following statements are correct? (Choose two.)
- A. This setup requires at least two firewall policies with the action set to IPsec.
- B. This is a redundant IPsec setup.
- C. The TunnelB route is the primary route for reaching the remote site. The TunnelA route is used only if the TunnelB VPN is down.
- D. Dead peer detection must be disabled to support this type of IPsec setup.
Answer: B,C
NEW QUESTION 57
Examine this output from a debug flow:
Why did the FortiGate drop the packet?
- A. It matched the default implicit firewall policy.
- B. The next-hop IP address is unreachable.
- C. It failed the RPF check.
- D. It matched an explicitly configured firewall policy with the action DENY.
Answer: A
Explanation:
Explanation
https://kb.fortinet.com/kb/documentLink.do?externalID=13900
NEW QUESTION 58
Refer to the exhibit.
According to the certificate values shown in the exhibit, which type of entity was the certificate issued to?
- A. A root CA
- B. A bridge CA
- C. A subordinate
- D. A user
Answer: D
NEW QUESTION 59
......
Ultimate Guide to the NSE4_FGT-6.4 - Latest Edition Available Now: https://www.actual4exams.com/NSE4_FGT-6.4-valid-dump.html