Updated PDF (New 2021) Actual Network Appliance NS0-175 Exam Questions
Verified NS0-175 Exam Dumps PDF [2021] Access using Actual4Exams
Network Appliance NS0-175 Exam Syllabus Topics:
| Topic | Details |
|---|---|
| Topic 1 |
|
| Topic 2 |
|
| Topic 3 |
|
| Topic 4 |
|
| Topic 5 |
|
| Topic 6 |
|
| Topic 7 |
|
| Topic 8 |
|
| Topic 9 |
|
NetApp NS0-175 Exam Certification Details:
| Duration | 90 minutes |
| Number of Questions | 60 |
| Exam Registration | PEARSON VUE |
| Passing Score | 66% |
| Recommended Training | FlexPod Fundamentals |
| Exam Price | $150 USD |
| Sample Questions | NetApp NS0-175 Sample Questions |
| Exam Code | NS0-175 FlexPod |
| Exam Name | Cisco and NetApp FlexPod Design |
NEW QUESTION 151
You are designing a FlexPod solution and would like to configure ESXi hosts for SAN boot over FCoE.
Which switch would you use for zoning in this architecture?
- A. Nexus 1010
- B. Nexus 7000
- C. Nexus 9000
- D. Nexus 3000
Answer: B
NEW QUESTION 152
Which item is an example of Role-Based Access Control and multi-tenancy support that can be applied to a UCS environment using the Cisco UCS Manager?
- A. Create roles for Data ONTAP Vserver administrators
- B. Create interface groups on NetApp storage
- C. Apply NFS read/write access to a network share
- D. Create a storage administrator role with control over tasks related to the SAN
Answer: D
NEW QUESTION 153
In a FlexPod design, when can NetApp storage be directly connected to a Cisco UCS server?
- A. Always
- B. Only in a FlexPod DataCenter design
- C. Only in a FlexPod Express design
- D. Only in a FlexPod Select design
- E. Never
Answer: D
NEW QUESTION 154
The best place to find information regarding a log header, such as x-cs-headerlength, is the _____.
- A. Administration Guide
- B. Guide to Caching Protocols and Services
- C. Deployment Guide
- D. Guide to Messages and Logfile Entries
Answer: D
NEW QUESTION 155
Which Microsoft service is used with Microsoft Hyper-V environments to assist with application-consistent backups?
- A. Volume Shadow Copy Service
- B. Branch Cache
- C. Online Shadow Copy Service
- D. Snapshot copies
Answer: A
NEW QUESTION 156
Which connectivity mode for Cisco UCS C-Series Rack-Mount Server management is supported beginning with Cisco UCS Manager release version 2.1 and above?
- A. Single-wire Management
- B. Dual-wire Management
- C. Quad-wire Management
- D. Side Frame management
Answer: A
NEW QUESTION 157
Which two LIFs are able to failover or migrate to other nodes in the cluster? (Choose two.)
- A. data LIF of protocol iSCSI
- B. data LIF of protocol NFS
- C. intercluster LIF
- D. node management LIF
- E. data LIF of protocol FCoE
- F. data LIF of protocol CIFS
Answer: B,F
NEW QUESTION 158
Which is true about UCS High Availability?
- A. Support for 3 Fabric Interconnects
- B. Port Channeling within UCS system requires Fabric Interconnects and IOMs to be at least second generation.
- C. UCSM supports vPC configuration
- D. Dual homing IOM to Fabric Interconnects
Answer: B
NEW QUESTION 159
Which tool may be used to determine the optimal UCS hardware configurations for SAP, Oracle, and Microsoft Enterprise Applications FlexPod solutions?
- A. Microsoft Assessment and Planning (MAP) Toolkit
- B. Cisco Resource Comparison Tool
- C. Cisco UCS Sizer for Enterprise Applications
- D. NetApp Solution Builder
Answer: C
NEW QUESTION 160
Which guide ensures that the NetApp hardware and software components are supported with the version of Data ONTAP that you plan to install?
- A. System Configuration Guides
- B. KB Articles
- C. Storage Partition Guide
- D. CVD Documents
Answer: A
NEW QUESTION 161
Which one of the following services is not a service supported by ICAP?
- A. URL filtering
- B. Virus scanning of content received through HTTP.
- C. Active content stripping
- D. Virus scanning of email content
Answer: D
NEW QUESTION 162
What are three requirements for all FlexPod Datacenter solutions? (Choose three.)
- A. two Cisco UCS 6200, 6300, or 6400 Series Fabric Interconnects in a redundant configuration
- B. a separate 100 Mbps Ethernet/1 Gbps Ethernet out-of-band management network
- C. two NetApp storage controllers in a high-availability (HA) pair configuration
- D. redundant boot-from-SAN LUN paths
- E. a pair of Fabric Extenders in a redundant configuration
Answer: A,D,E
NEW QUESTION 163
Cisco UCS Manager may be used to manage which four tasks within a Cisco UCS domain? (Choose four)
- A. Deploy patches for software, such as an OS or an application
- B. Cisco UCS resource management including WWN addresses, MAC addresses, UUIDs, and bandwidth
- C. Deployment of a Windows or Linux Operating system
- D. Management of non-Cisco x86 systems
- E. Network administration such as creating VLANs, uplink ports, port channels and LAN PIN groups
- F. Install software applications, such as databases, application server software, or web servers
- G. Cisco UCS hardware including the chassis, servers, fabric interconnects, and i/o modules
- H. SAN configuration tasks such as creating VSANs, QoS classes and definitions, and port channels.
Answer: B,E,G,H
NEW QUESTION 164
A customer wants to add 40 Gbps networking capabilities to a FlexPod Datacenter 10 Gbps environment.
Which two Cisco components support this speed? (Choose two.)
- A. Cisco Nexus 3550-F
- B. Cisco UCS 1440 VIC
- C. Cisco Nexus 9504
- D. Cisco UCS 1455 VIC
Answer: A,B
NEW QUESTION 165
A customer has configured a FlexPod solution and is experiencing issues with connectivity from the Cisco Nexus switches to the NetApp AFF controllers. The customer must verify connectivity using the FC protocol.
What are two ways to troubleshoot this problem? (Choose two.)
- A. Use the WWPN
- B. Use the WWNN
- C. Use Domain ID
- D. Use the FCID
Answer: A,D
NEW QUESTION 166
......
Try Best NS0-175 Exam Questions from Training Expert Actual4Exams: https://www.actual4exams.com/NS0-175-valid-dump.html